Cylinders
Block
Single and Double Acting No special mounting hardware required, just bolt down these easy to use devices. Dual position mounting, either parallel or perpendicular to piston travel, on every model. A force ranging from “negligible” to maximum cylinder capacity, simply adjust the input pressure. Advance porting, for easy plumbing, is provided on both bottom and side of most models. Threaded piston ends allow the use of custom end attachments (Double Acting recommended for attachments or mechanisms). Springs are designed to return the cylinder and contact points, S/A not intended to pull mechanisms.
Cylinder Capacity (lbs.)**
Oil Capacity (cu. in.)
Piston Area (sq. in.)
Minimum Length (in.)
Model No.
Body Size
Stroke (in.)
Extend Retract
Extend Retract Extend Retract
Single Acting (S/A)
Cylinders, actuated hydraulically 1 direction, spring returned.
20-1108-00 20-1108-01 20-1110-00 20-1110-01 20-1110-04 20-1110-02 20-1115-00 20-1115-01 20-1115-04 20-1115-02
0.25 1.13 X 2.00 0.75
2.37 3.12 2.80 3.30 3.93 4.43 2.88 3.38 3.88 4.38
0.110 0.330 0.393 0.785 1.177 1.570 0.884 1.767 2.650 3.534
2,200 N/A
0.442 N/A
N/A
0.50 1.00 1.50 2.00 0.50 1.00 1.50 2.00
1.75 X 2.00
3,900 N/A
0.785 N/A
N/A
F-6
2.00 X 2.50
8,800 N/A
1.767 N/A
N/A
Double Acting (D/A)
Cylinders, actuated hydraulically both directions.
20-1208-00 20-1208-01 20-1210-00 20-1210-01 20-1210-04 20-1210-02 20-1215-00 20-1215-01 20-1215-04 20-1215-02 20-1215-05 20-1215-06
0.25 1.13 X 2.00 0.75
2.37 3.12 2.80 3.30 3.93 4.43 2.88 3.38 3.88 4.38 6.38 8.38
0.110 0.061 0.330 0.183 0.393 0.134 0.785 0.268 1.177 0.400 1.570 0.536 0.884 0.387 1.767 0.774 2.650 1.160 3.534 1.548 7.068 3.092 10.602 4.638
2,200 1,200
0.442 0.246
0.50 1.00 1.50 2.00 0.50 1.00 1.50 2.00 4.00 6.00
** Cylinder capacities are at 5,000 psi maximum operating pressure. The output force is adjustable by varying hydraulic system pressure. To determine the approximate output force for your application, multiply the piston area by your system operating pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag and/or return springs.)
1.75 X 2.00
3,900 1,300
0.785 0.267
2.00 X 2.50
8,800 3,800
1.767 0.773
Dimensions Model No.
A B C D E
F
G H J
K L
M N
Single Acting (S/A) 20-1108-00 2.37 0.25 1.84 20-1108-01 3.12 0.75 2.59 20-1110-00 2.80 0.50 2.25 20-1110-01 3.30 1.00 2.75 20-1110-04 3.93 1.50 3.38 20-1110-02 4.43 2.00 3.87 20-1115-00 2.88 0.50 2.25 20-1115-01 3.38 1.00 2.75 20-1115-04 3.88 1.50 3.25 20-1115-02 4.38 2.00 3.75 Double Acting (D/A) 20-1208-00 2.37 0.25 1.84 20-1208-01 3.12 0.75 2.59 20-1210-00 2.80 0.50 2.25 20-1210-01 3.30 1.00 2.75 20-1210-04 3.93 1.50 3.38 20-1210-02 4.43 2.00 3.87 20-1215-00 2.88 0.50 2.25 20-1215-01 3.38 1.00 2.75 20-1215-04 3.88 1.50 3.25 20-1215-02 4.38 2.00 3.75 20-1215-05 6.38 4.00 5.75 20-1215-06 8.38 6.00 7.75
0.29 0.28 0.92 N/A 0.50 1.31 0.22 2.00 1.31 0.66
N/A N/A 1.13 1.62 N/A N/A 1.00 1.63
0.32 0.34 1.06
0.81 1.50 0.26 2.00 1.50 0.75
0.40 0.34 1.06
1.13 2.00 0.36 2.50 1.90 0.95
0.29 0.28 0.92 N/A 0.50 1.31 0.22 2.00 1.31 0.66
N/A N/A 1.13 1.62 N/A N/A 1.00 1.63 3.00 5.00
0.32 0.34 1.06
0.81 1.50 0.26 2.00 1.50 0.75
0.40 0.34 1.06
1.13 2.00 0.36 2.50 1.90 0.95
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker