Cylinders
Block
ALT. SAE 4 ADV. PORT EXCEPT ON MODELS 20-1X08-0X (INSTALLED PLUG WILL BE BELOW THIS SURFACE)
.25
P
N
H J
L M
Q THRU
K
E THRU
G
F
X
R WRENCH FLATS
D
C
S
A
B STROKE
T
V W
AB
AC
Y
SAE 4 RETRACT PORT ON ALL D/A MODELS; BREATHER ON S/A MODELS SAE 4 ADVANCE PORT
AA
Z
ILS201101 REV E
F-7
G
NOTE: When mounting block cylinders on high force installations, provide cylinder back-up using square key in fixture or similar means as shown in illustration at left. When clamping force is applied, the back-up
element resists the sliding tendency of the block and eliminates shear loads on mounting bolts.
ILS201102 REV C
ILS201100 REV D
ILS201100 REV D
P
Q R
S
T
V W X
Y Z AA AB AC Cylinders, actuated hydraulically 1 direction, spring returned.
1.10 1.85 1.62 2.25 2.75
0.91 0.28 0.43 0.31 0.56 0.62 1.13 1/4-20 T 0.44 1.06
0.38
0.38 0.38
v
1.00 0.28 0.68 0.62 0.87 1.25 1.75 5/16-18 T 0.44 1.38 0.50 1.12
0.31 0.88
v
1.25 0.34 1.00 0.70 1.00 1.40 2.00 1/2-13 T 0.51 1.75 0.50 1.12
0.31 1.00 1.62 2.12 2.66 Cylinders, actuated hydraulically both directions.
v
0.91 0.28 0.43 0.31 0.56 0.62 1.13 1/4-20 T 0.44 1.06 0.38 1.10 1.00 0.28 0.68 0.62 0.87 1.25 1.75 5/16-18 T 0.44 1.38 0.50 1.12 1.85 v
0.38 0.38
1.62 2.25 2.75 1.12 1.62 2.12 2.66 4.66 6.66
0.31 0.88
v
1.25 0.34 1.00 0.70 1.00 1.40 2.00 1/2-13 T 0.51 1.75 0.50
0.31 1.00
v
All dimensions are in inches.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker