Planning
Fixture Documentation Worksheet
VektorFlo ® Hydraulic Fixture Setup Documentation and Troubleshooting Worksheet
A-7
Fixture Designed By:__________________________ Fixture Built By:_____________________________ Built For: ________________________________ Fixture Serial #: _ __________________________
1. All pressure gauge readings checked and verified at “0” operating pressure.______ Yes ______ No 2. Main system operating pressure read from the gauge mounted on the clamping system pump ______ psi or inlet air pressure from air gauge on boosters ______ psi, booster ratio ______:______. 3. Pump restart pressure checked. Pump restarts at ______ psi. 4. Fixture operating pressure read at fixture gauge ______psi, side A______psi, side B 5. Pressure limit circuits pressure checked: Side A ______ psi Components & location: ______________________________________ Side A ______ psi Components & location: ______________________________________ Side A ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ 6. Sequence operations set to: Side A ______ psi Components & location: ______________________________________ Side A ______ psi Components & location: ______________________________________ Side A ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ Side B ______ psi Components & location: ______________________________________ 7. Fittings checked, secure, no leaks, proper type, not restrictive.______ Yes ______ No 8. Schematic diagram attached. 9. Bill of materials (hydraulic components) attached.
For troubleshooting assistance contact your Designer/Builder or, complete steps 1-9 above and fax this sheet with all additional pages to 816-364-0471. We are pleased to be of service . © 1996 -2019 Vektek LLC. This documentation sheet may be used to document fixtures built using VektorFlo ® brand hydraulic clamps. This sheet is copyrighted material and remains the sole property of Vektek LLC. The use of this documentation sheet in its original form or altered state to document fixtures with non-Vektek product is a violation of your assigned rights.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker