Miscellaneous Plumbing
Rotating Union, 6 Path
6 Path Rotating Unions
6X SAE 4
6X .19 thru oil passage, manifold mount models only
1.83
2X 1.27
2.375 B.C.
6X SAE 4
6X 60
.38 Thru
1
3
5
3X
2.94
1.000 B.C.
90
45
2
4
6
5X 60
2.500 B.C.
.75
30
4X 1/4-20 x.50
2.47
2X 1.27
6X 1/4-20 x.75
6.09
A
6X 60
.875
6X .19 Thru oil passage
Optional 6 or 12 Circuit Electrical Slip Ring: -Aluminum Slip Ring Cap -Water Tight Pin Connector -48 in. Lead Wire
Operating Parameter Guidelines: - Max. Pressure: 5,000 psi - Max. Vacuum: 30 Hg - Max. RPM under vacuum: contact factory - Max RPM under pressure: see table on page I-3
6X .26 Thru
1.000 B.C.
3.94
3.500
5X 60
(48)
B.C
.56 .50
30
- Operating Temperature Range with slip ring 0° - 176° F - Operating Temperature Range without slip ring 0°- 220° F - Air may be run in any available passage - Rotating unions are not intended to be a structural member. It is recommended that the anti-rotate arm should attach to the stationary part of the union and should be minimized. Please contact Vektek for technical assistance. - Separate air and fluid with extra passage between each.
A
Optional 6 or 12 Pin x 32 ft. Cordset -Ordered Separately See Table
Optional Steel Mounting Flange PN 93-2620-00
SECTION A-A
ILS326200 REV K
For proper sealing, mating surface should be flat to 0.003 in. with a maximum 32 µ in. R a surface finish.
I-8
6 Path Rotary Unions
Hydraulic Input Connection
Maximum Current per Circuit
Maximum Volts per Circuit
Lead Wire Length
Optional Mounting Flange Model No.**
Model No.
Electrical Slip Ring Option
Optional Cord Set***
32-6246-00
SAE 4 Ports
N/A
N/A
N/A
N/A
N/A
32-6246-00-ES6A SAE 4 Ports 32-6246-00-ES12A SAE 4 Ports
6 Circuit 12 Circuit
2 Amp 2 Amp
120 VAC 48” 120 VDC 48”
27-6424-01 27-6424-02
O-Ring Face Seal* O-Ring Face Seal* O-Ring Face Seal*
32-6246-01
N/A
N/A
N/A
N/A
N/A
93-2620-00
32-6246-01-ES6A
6 Circuit
2 Amp
120 VAC 48”
27-6424-01
32-6246-01-ES12A
12 Circuit
2 Amp
120 VDC 48”
27-6424-02
Operating Limits
PREFORMANCE DATA PRESSURE ( psi ) verses TORQUE ( ft-lb )
*
O-Rings furnished: -010, 70A, NBR Part No. 55-2500-01
300 250 200 150 100 50
** Optional Mounting Flange includes:
6 SHCS 1/4-20 x 1/2 (Part No. 21-4100-63) 6 O-Rings -010, 70A NBR (Part No. 55-2500-01) 1 O - Rings -012, 70A NBR (Part No. 39-0020-09) 1 O-Rings - 013, 70A NBR (Part No. 39-0000-72)
20 30 40
*** Order cord set separately.
10
Installation instructions available. Request IS3205 or visit our online catalog for a link to this document.
0
0
Input Pressure (psi)
Model No. 32-6246-00
Torque data based on all passages (ports) pressurized. Input Pressure (psi)
32-6246-01 32-6246-01-ES6A* 32-6246-01-ES12A*
32-6246-00-ES6A* 32-6246-00-ES12A*
Model No. 32-6246-00
ILS321214 REV B 32-6246-01 32-6246-01-ES6A 32-6246-01-ES12A
32-6246-00-ES6A 32-6246-00-ES12A
ILS321217 REV B
*Max speed for slip ring 100RPM
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker