Push/Pull Cylinders
Manifold/Bottom Flange
Single And Double Acting Double acting have an extended capacity of 1200 to 6100lb., depending on operating pressure. Their retract capacities are the same as the single acting, at the same operating pressures. Mounting versatility allows the unit to be bolted up, bolted down, or to be traditionally mounted. Single piece body and mounting give a rigid installation without additional mounting hardware to buy, saving time and money. Also available in a straight line guided model, order as swing clamp. Optional In-Port Flow Control is a meter-in device with reverse free flow check valve. Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.
G-6
H
Effective Piston Area (sq. in.)
Oil Capacity (cu. in.)
Port X Depth for Optional In-Port Valves ***
Cylinder Capacity (lbs.)**
Model No.
Stroke (in.)
Extend Retract
Extend Retract Extend Retract
Single Acting (S/A)
Cylinders, actuated hydraulically 1 direction, spring returned.
25-2105-02 25-2109-02 25-2113-02
N/A N/A N/A
470
0.57 0.79 1.16 0.57 0.79 1.16
N/A N/A N/A
0.098 0.295 0.626
N/A N/A N/A
0.056 0.233 0.726
SAE 4 X .58 SAE 4 X .75 SAE 4 X .75
1,400 3,100
Double Acting (D/A) 25-2205-02 1,200 25-2209-02 3,000 25-2213-02 6,100
Cylinders, actuated hydraulically both directions.
470
0.249 0.601 1.227
0.098 0.295 0.626
0.142 0.475 1.423
0.056 0.233 0.726
SAE 4 X .58 SAE 4 X .75 SAE 4 X .75
1,400 3,100
** Cylinder capacities are listed at 5,000 psi maximum operating pressure. The output force is adjustable by varying the hydraulic system pressure. To determine approximate output force for your application, multiply the piston area by your system operating pressure. (Actual force may vary slightly due to friction loss, seal and wiper drag and/or return springs.) *** In-Port Valves require the use of manifold mount ports.
Dimensions Model No.*
A
C
D
E
F
G H
J
K
M
Single Acting (S/A) 25-2105-02*
1.05 1.49 1.79
4.06 5.33 6.83 4.06 5.33 6.83
2.80 3.65 4.43 2.80 3.65 4.43
1.00 1.25 1.25 1.00 1.25 1.25
SAE 4 SAE 4 SAE 4 SAE 4 SAE 4 SAE 4
0.438 0.625 0.875 0.438 0.625 0.875
0.38 0.56 0.75 0.38 0.56 0.75
0.66 Breather 0.66 Breather 0.66 Breather
0.57 0.79 1.16
25-2109-02 25-2113-02
Double Acting (D/A) 25-2205-02* 1.05
0.66 0.63 0.63
SAE 4 0.57 SAE 4 0.79 SAE 4 1.16
25-2209-02 25-2213-02
1.49 1.79
* Models 25-2105-02 and 25-2205-02 do not include the option for manifold mounting on the top surface. All models are shipped with the necessary plugs and O-Rings for manifold mounting. ** All five mounting screws must be used when manifold mounting to assure a leak free O-Ring seal.
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker