Push/Pull Cylinders
Bottom Flange/Manifold Mount
EXTEND PORT FOR MANIFOLD MOUNT, TOP & BOTTOM - D/A BREATHER PORT - S/A*
K EXTEND PORT - D/A BREATHER PORT - S/A
J
Q
S
5X Y**
M STROKE
T
A
P
W
2X H
2X V
G
F RETRACT OR FLOW CONTROL PORT
2X R
E
Z
D
X
C
RETRACT PORT FOR MANIFOLD MOUNTING TOP & BOTTOM*
ILS252101 REV L
OPTIONAL TOP OR BOTTOM O-RING FACE SEAL MOUNTING CONFIGURATION. TOP OF FLANGE, O-RING FACE SEALING IS NOT AVAILABLE ON MODELS 25-2105-01 & 25-2205-01
G-7
.09-.15 FEEDER HOLE
FIXTURE PLATE
PORT PLUG
SAE 2 PORT- PLUGGED WHEN NOT IN USE
.09-.15 FEEDER HOLE
ILS252102 REV B
SAE 4 PORT- PLUGGED WHEN NOT IN USE, OR USED AS A FEED THROUGH PORT TO OPERATE ADDITIONAL DEVICES.
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µin. R a surface finish.
SINGLE ACTING SINGLE ACTING
DOUBLE ACTING DOUBLE ACTING
ILS252100 REV J ILS252100 REV J
P
Q R
S
T
V Z Cylinders, actuated hydraulically 1 direction, spring returned. W X Y
1/4-28 X 0.28 3/8-24 X 0.47 1/2-20 X 0.52 1/4-28 X 0.28 3/8-24 X 0.47 1/2-20 X 0.52
1.06 0.99 1.21 1.06 0.99 1.21
0.38 0.56 0.69 0.38 0.56 0.69
0.53 0.75 0.94 0.53 0.75 0.94
0.75 1.00 1.25 0.75 1.00 1.25
0.59 0.81 1.00 0.59 0.81 1.00
1.50 2.00
1.73 2.41 2.72 1.73 2.41 2.72
0.22 0.28 0.34 0.22 0.28 0.34
0.81 1.13
2.50 1.25 Cylinders, actuated hydraulically both directions.
1.50 2.00 2.50
0.81 1.13 1.25
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker