Vektek Inch Hydraulic Clamping Catalog

Power Supplies

Portable 1/3 hp Electric Hydraulic Pump

Portable Electric/Hydraulic Pump  New enclosed motor housing eliminates entry of motor damaging environmental debris.  New beefier motor extends life and runs quieter than the previous model.  Builds to preset pressure, maintains continuous pressure until switched off and will not release until electrically signaled.  Fully self-contained, yet easily portable, weighs only 32 lbs with oil.  Hydraulic pressure switch externally adjustable from 725 to 5,000 psi.  Two-stage pump flows 120 cu. in. per minute at low pressure; 12 cu. in. per minute at maximum pressure.  Integral safety overload valve, factory set at 5,000 psi.  Reservoir usable oil capacity: 108 cu. in. Extreme portability and easy pressure adjustment make this a versatile pump that can be fitted with quick connectors to serve as the power source for fixtures used in various plant locations. To ensure long, trouble-free service, VektorFlo ® power supplies have been specially engineered to operate at 5,000 psi, optimum pressure for power workholding. The pump automatically holds the pressure set on the pressure switch and automatically restarts should a pressure drop occur. The compact motor draws only 7.2 amps at full pressure. Nothing is needed other than a hose to put this self-contained unit to work.  Equipped with single-phase 115V 1/3 hp motor.  Installed length of the pendant cable is 9 feet.

Select pendant desired by the pump model number.

Shown with Optional Filler Kit and Standard Pendant

Pendant Style Model No. To order only Pendant:

Solenoid Valve

SAE 6 Pressure Port

Adjustable Pressure Switch

Standard

95-5322-01

14.95 Approx

Vent Port with Dipstick

3/8 NPT Fill Port

Solenoid Valve

J-6

Premium 95-5322-02

(Return Port for Double Acting Devices)

5.32 Approx

4.23

7.87

6.69

1/4 NPT Drain Port

Standard

Remove glued on rubber foot to access threaded hole

3.13

2X 6.30

4X M6x1 .35

REMOVABLE FILL CAP

Premium

2X 5.12

120 X 108 MESH STRAINER W/ .0035 WIRE

6.46

ILS553201 REV C

6.69

Optional Filler Kit Model No. 62-5530-02

Standard

KIT INSTALLS IN PLACE OF 1/3 HP PUMP DRAIN PLUG

ILS553202 REV C

Premium

11.13

Pump Flow /Minute

Reservoir Capacity

Motor

Model No.

Pendant Style

Cylinder Use *

Valve Type*

Cylinder Operation

1/3 hp, 50/60 Hz

100 psi

5000 psi

Gross

Useable

55-3221-32 Standard

1-PH, 115VAC, 7A

55-3221-34 Premium

Single Acting or Double Acting

2-Way/ 3-Port Electric

Advance, Hold, Release

120 cu. in. 12 cu. in. 122 cu. in.108 cu. in.

55-3221-36 Standard 55-3221-38 Premium

1-PH, 230VAC, 4A

WARNING! The use of spool valves invalidates the warranty on VektorFlo ® pumps. * Double acting systems require the use of a remote valve and return line. Valve information in section N. Available with SAE 6 outlet port.

www.vektek.com

800-992-0236

© Vektek, January 2023

Made with FlippingBook - Online magazine maker