Fittings/Hoses and Manifolds
Hoses & Tubing
Hoses All VektorFlo ® hoses are intended to operate up to 5,000 psi working pressure. End fittings have the largest possible orifice to reduce restrictions and allow devices to work better. Large hoses are typically used to feed entire fixtures, medium size hoses are for feeding small fixtures or single devices. Small hoses are to be used to feed single devices ONLY and are to be connected directly back to a manifold unless used on double acting clamps. NOTE: Use of standard rubber hoses and end fittings can hamper the action of many
5 FT.
STEEL HYDRAULIC TUBING (PER SAE J525)
ILS350000 REV B
Tubing
Part No. Description 35-0002-05 1/4 (0.250”) O.D. x 0.049 Thick Wall 35-0003-05 3/8 (0.375”) O.D. x 0.065 Thick Wall Suggested Center Line Radius 1/4” =0.56 and 3/8” =0.94
devices due to excessive end fitting restrictions. If you choose to purchase hoses from another supplier, be sure that hose diameters and end fittings are not causing excessive restrictions.
Fitting B
Fitting A
F
H-7
Fitting B
35-1112-XX
Fitting A
F
35-1133-XX
Fitting B
Fitting A
F
35-1446-XX
ILS351100 REV F
Hoses
Model No.
Minimum Bend Radius (in.)
Hose I.D.
Hose O.D.
Fitting A
Fitting B
F
35-1112-08 35-1112-12 35-1112-18 35-1112-24 35-1112-30 35-1112-42 35-1133-02 35-1133-03 35-1133-05 35-1446-03 35-1446-05 35-1446-10
8 in.
12 in. 18 in. 24 in. 30 in. 42 in. 24 in. 36 in. 60 in. 36 in. 60 in.
7/16-20 Female JIC 37° Swivel (Single device feed hose)
0.79
0.14 0.29
7/16-20 Female JIC 37° Swivel
7/16-20 Male Straight Thread SAE 4 O-Ring Boss
1.50
0.19 0.43
7/16-20 Female JIC 37° Swivel
9/16-18 Male Straight Thread SAE 6 O-Ring Boss
9/16-18 Male Straight Thread SAE 6 O-ring Boss
2.50
0.38 0.67
120 in.
D
Hose Mounting Clip Dimensions Model No. Hose O.D. A B C D 35-2001-00 0.29 0.48 0.36 0.80 0.13 35-2003-00 0.43 0.74 0.57 1.10 0.16 35-2006-00 0.67 1.04 0.80 1.61 0.22
C
B
A
ILS352000 REV F
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker