Cylinders
Cartridge Mount Push/Pull
B
D
G
H THREAD
Q SPRING CAVITY
4X J SPANNER HOLE
A
P
2X R
2X K
F
L
C STROKE
M
2X S
E THREAD X DEPTH
2X K
2X N RETRACT FEED HOLE
ILS210104 REV G
*Install includes return spring for S/A operation.
2X P Q
*NOTE: Anti-rotation pins intended for hand installation of bolt only. Do not torque bolt against anti-rotation pins.
R
NOTE: FLEXIBLE HONING/ BALL HONING OF CAVITY IS
BREAK EDGE OF 15 RAMP .010 MAX
B C .005
STRONGLY RECOMMENDED.
.005 A
FROM BOTTOM OF COUNTERBORE MINOR D.005 E F THREAD UN G MIN
H MIN
.005 A
K MIN
15 1
L MAX
I-19
J +.005 M -.000
45 5
.125 MIN
40
R.020 MAX
ILS210103 REV E
A .001 -A- N MAX
S/A BREATHER HOLE LOCATION D/A EXTEND FEED HOLE LOCATION
Cavity Dimensions Model No.
ILS210105 REV G
Cap. A B C D E F G H J* K L M N** P*** Q***R*** Cartridge Torque (ft. - lbs.) ****
Double Acting (D/A)
Cylinders, hydraulically actuated in both directions.****
21-0206-00 21-0206-01 21-0206-11 21-0209-00 21-0209-01 21-0209-11 21-0210-00 21-0210-01 21-0210-11 21-0213-00 21-0213-01 21-0213-11 21-0216-00
0.60 0.60 1-16 0.48 0.26 0.116 0.39
0.75 0.75
1.130 1.130 0.16 0.125
0.625 0.625 0.44 25
1,500 0.813 1.27 1.080 0.939
0.86
1.01 1.374
0.750
0.68 0.68 1 5/16-16 0.50 0.26 0.116 0.39
0.75 0.75
1.130 1.130 0.18 0.125
0.625 0.625 0.53 35
2,900 1.188 1.65 1.393 1.252
1.33
1.40 1.763
0.750
0.67 0.67 1 1/2-16 0.53 0.33 0.116 0.46
0.81 0.81
1.192 1.192 0.18 0.156
0.625 0.625 0.56 60
3,900 1.313 1.77 1.580 1.439
1.32
1.46 1.822
0.750
0.75 0.75 1 7/8-16 0.59 0.33 0.116 0.46
0.81 0.81
1.192 1.192 0.33 0.156
0.625 0.625 0.88 65
7,400 1.751 2.15 1.955 1.814
1.35 0.70 0.70
1.41 1.776
0.750 0.625 0.625
0.93 0.93
1.318 1.318
12,000 2.126 2.64 2.455 2.314
2 3/8-16 0.59 0.45 0.116 0.45
0.35 0.281
1.00 160
21-0216-01 21-0221-00 22,000 2.876 3.39 3.205 3.064 1.088 3 1/8-16 0.72 0.45 0.116 0.58 1.31 1.693 0.40 0.281 0.625 1.57 200 * The 15° and 45° features of the cavity can be formed using an SAE 12, reduced spot face cutter except on models 21-0206-00, 21-0206-01 and 21-0206-11. ** N is intended for S/A cylinders (only) to prevent interference with the return spring. For D/A operation the feed can be positioned anywhere in the bottom of the cavity. Install included return spring for S/A operation. Return spring and anti-rotate pins are included with cylinder. *** Features for use with anti-rotate pins. **** Lubricate O-Rings with grease prior to installation.
www.vektek.com
800-992-0236
© Vektek, August 2026
Made with FlippingBook - Online magazine maker