Power Supplies
Portable 1/3 hp Electric Hydraulic Pump
Portable Electric/Hydraulic Pump New enclosed motor housing eliminates entry of motor damaging environmental debris. New beefier motor extends life and runs quieter than the previous model. Builds to preset pressure, maintains continuous pressure until switched off and will not release until electrically signaled. Fully self-contained, yet easily portable, weighs only 32 lbs with oil. Hydraulic pressure switch externally adjustable from 725 to 5,000 psi. Two-stage pump flows 120 cu. in. per minute at low pressure; 12 cu. in. per minute at maximum pressure. Integral safety overload valve, factory set at 5,000 psi. Reservoir usable oil capacity: 108 cu. in. Extreme portability and easy pressure adjustment make this a versatile pump that can be fitted with quick connectors to serve as the power source for fixtures used in various plant locations. To ensure long, trouble-free service, VektorFlo ® power supplies have been specially engineered to operate at 5,000 psi, optimum pressure for power workholding. The pump automatically holds the pressure set on the pressure switch and automatically restarts should a pressure drop occur. The compact motor draws only 7.2 amps at full pressure. Nothing is needed other than a hose to put this self-contained unit to work. Equipped with single-phase 115V 1/3 hp motor. Installed length of the pendant cable is 9 feet.
Select pendant desired by the pump model number.
Shown with Optional Filler Kit and Standard Pendant
Pendant Style Model No. To order only Pendant:
Solenoid Valve
SAE 6 Pressure Port
Standard
95-5322-01
Adjustable Pressure Switch
14.95 Approx
Vent Port with Dipstick
3/8 NPT Fill Port
Solenoid Valve J-6
Premium 95-5322-02
(Return Port for Double Acting Devices)
5.32 Approx
4.23
7.87
6.69
1/4 NPT Drain Port
Standard
Remove glued on rubber foot to access threaded hole
3.13
2X 6.30
4X M6x1 .35
REMOVABLE FILL CAP
Premium
2X 5.12
120 X 108 MESH STRAINER W/ .0035 WIRE
6.46
6.69
ILS553201 REV C
Optional Filler Kit Model No. 62-5530-02
Standard
KIT INSTALLS IN PLACE OF 1/3 HP PUMP DRAIN PLUG
ILS553202 REV C
Premium
11.13
Pump Flow /Minute
Reservoir Capacity
Motor
Model No.
Pendant Style
Cylinder Use *
Valve Type*
Cylinder Operation
1/3 hp, 50/60 Hz
100 psi
5000 psi
Gross
Useable
55-3221-32 Standard
1-PH, 115VAC, 7A
55-3221-34 Premium
Single Acting or Double Acting
2-Way/ 3-Port Electric
Advance, Hold, Release
120 cu. in. 12 cu. in. 122 cu. in.108 cu. in.
55-3221-36 Standard 55-3221-38 Premium
1-PH, 230VAC, 4A
WARNING! The use of spool valves invalidates the warranty on VektorFlo ® pumps. * Double acting systems require the use of a remote valve and return line. Valve information in section N. Available with SAE 6 outlet port.
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker