Power Supplies
Advanced Workholding Pump 2 HP Convenience Package
200-240 VAC 3 Phase
380-500 VAC 3 Phase
No. of Valves
Pallet Decoupler (one hose) S/A
Valve Type: Manual 2-Position 3-Port • Can use coupled or uncoupled.
Recommended to run a continuously connected or single hose supply decoupled system. Operator interface is by a manual valve handle.
•
1
55-9675-12-1 55-9695-12-1
• •
Pump located within operators reach. Valve Type: 24VDC 2-Position 3-Port Normally Closed "Dump Pump" • Single Acting Decoupled Systems.
Valve installed with a control pendant to power systems using the Self-closing Decoupler and Tombstone Top Plates. Commonly called a "dump pump" and uses a momentary contact pendant switch. When preset pressure is reached the control valve automatically shifts and dumps pressure back to tank.
•
•
1
55-9675-25-1 55-9695-25-1
•
•
Operator interface is by remote pendant or can be wired into a machine controller. Valve Type: 24VDC 2-Position 3-Port Normally Closed • Single Acting Live systems.
Use with Manual Pallet Decouplers, Tombstone Top Plates and Self-Closing (single hose) Decouplers. Operator interface is by remote pendant or can be wired into a machine controller. All decoupled valves are de-energized when not in use to avoid heat build-up between cycles.
•
1 2 4
55-9675-24-1 55-9675-24-2 55-9675-24-4
55-9695-24-1 55-9695-24-2 55-9695-24-4
•
NOTE:
Pallet Decoupler (two hose) S/A or D/A
J-12
Valve Type: Manual 3-Position 4-Port P-Blocked • Double Acting or Single Acting run live or decoupled. 1 • Control Auto-Shutoff Pallet Decoupler. (2 hose system)
55-9675-17-1 55-9695-17-1
Operator interface is a manual valve handle.
• •
Best selection for fixture testing, runs most systems. Valve Type: 24VDC 3-Position 4-Port P-Blocked Center with A & B Individual Circuit Pressure Adjustment • Reduces pressure to clamp or unclamp side of a circuit.
Use with one or two handed Auto-Shutoff Decoupler. P-Blocked center valve drops pressure in both lines. Allows decoupling and re-coupling of the hoses. Operator interface is remote pendant or wired into a machine controller.
• •
1
55-9675-28-1 55-9695-28-1
•
• This configuration can also be used to operate two individual single acting systems at different pressures. Valve Type: 24VDC 3-Position 4-Port P-Blocked • Double or Single Acting.
Use 1 or 2 handed Auto-Shutoff Pallet Decoupler. Uses a P-Blocked center to drop pressure in both lines to decouple and re-couple hoses. Operator interface is by remote pendant or can be wired into a machine controller.
• •
1 2 4
55-9675-27-1 55-9675-27-2 55-9675-27-4
55-9695-27-1 55-9695-27-2 55-9695-27-4
•
NOTE: 525-600V, 3-Phase pumps are available upon request.
ILS559604 REV C
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker