Palletized Fixture Accessories
Thread-In Coupling Specifications
Thread-In Coupling Elements Coupling elements are designed to deliver a leak free connection, regardless of pressure state, while coupling. Choose between two flow rates and two nominal diameter sizes. The compact design allows couplings to be recessed into the fixture plate. Stainless steel construction provides long service life with replaceable face seals. Axial face seal between coupling mechanism and coupling nipple. Both elements must be positioned and guided within specified tolerances before contact with sealing surfaces. Coupling force at operating pressure ranges from 0-800 and 0-1800 pounds depending on model. Spanner and Seal replacement installation tools available.
Specifications
Max Flow Rate (cu.in./min.)
Min Coupling Force (at 0 psi)
Max. Operating Pressure
End Type Mech.
End Type Nipple
Coupling Type
Nom. Ø
Stroke (in.)
Thread
56-1013-00 56-1113-00 56-1123-00 56-1023-00 56-1015-00 56-1115-00 56-1125-00 56-1025-00
Pressurized
3
M20 x 1.5
5,000 psi
490
0.18
21 lbs
Depressurized
Pressurized
5
M24 x 1.5
7,250 psi
730
0.18
22 lbs
Depressurized
NOTE: Clean face of coupling elements with compressed air prior
to connecting coupling to protect from contamination intrusion. Both elements must be guided about 1/16 to 1/8 inch before elements touch each other. Guidance should prevent the elements from moving out of axial alignment as they are coupled.
Tools
K-23
Mechanism
Spanner Tool
Seal Tool
Model No.
56-1013-00 56-1023-00 56-1015-00 56-1025-00 56-1113-00 56-1123-00 56-1115-00 56-1125-00
AT-5613-00 AT-5603-00
1 Permitted Angle Tolerance
AT-5615-00 AT-5605-00
0.012 Radial Position Tolerance
AT-5613-00
N/A
0.0625-0.125 Guidance Required
+0.02 Axial Position Tolerance (Max gap engaged)
AT-5615-00
N/A
ILS561000 REV C
Nipple
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker