Power Supplies
Okuma THINC® App Pump Features and Accessories
Vektek’s THINC App for OKUMA CNC Machines:
4.) Select and Edit the pump functions including:
Runs on your Okuma Machine with OSP-200 or OSP-300 HMI controller. Clamp & Unclamp desired sequences are displayed on your OKUMA Controller (HMI) and available for configuration within minutes of installation. 1.) Plug the RJ45 Ethernet connection from pump to CNC electrical panel. 2.) Install via a USB the Vektek Thinc app directly to the HMI of the OKUMA CNC. The Vektek Thinc App program is included in your pump package. 3.) With the download completed your OKUMA Control Panel (HMI) becomes your complete interface between pump and machine. The HMI will display all valve functions, pressure switches and other important signals. Installation:
• Clamp sequence and confirmation • Unclamp sequence and confirmation • Confirmation of pneumatic sensing • Clamping status • Unclamping status • Filter status • Oil level and temperature status 5.) Run on manual mode, test, and switch to automatic. You are ready to start production! • High or Low operating pressure (1500-5000psi or 300-1500psi) • Operates either continuously connected or decoupled fixtures • Several 3 phase electrical choices in multiple voltages
Call Vektek today and talk to an automation specialist about your application.
95% MORE EFFICIENT Less Maintenance with More Productivity Time. Customers save THOUSANDS in Operating Cost Yearly!
J-18
$1,960.00
Pump/Machine Tool Interface Ethernet Cable with Okuma THINC® App
6 Electrical Service Inputs Available for Worldwide Power Requirements
$96.00
Competitor Electrical & Oil Consumption
Vektek Electrical & Oil Consumption
Replacement Filter Order # 31-0500-18
Don’t Let Your Fixture Pump be an Afterthought!
Electronic Pressure Switch
Pressure Reducing Valve
Solenoid Operated Valves 2/3 or 3/4
Accumulator
ILS559511 REV A
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker