Palletized Fixture Accessories
Automatic Shutoff Valve Decouplers, Two-Handed Operating Handle
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems Decouplers are a convenient, self-contained package that includes quick connect couplings, filters, pilot operated check valve, accumulator and an over pressure relief valve. Robust pilot operated check valve with a 1:5 pilot to check ratio for proven long term reliability. Internal 25 micron filters for added protection of pilot operated check valve thru ports A1, A2, A3, A4 & C1. Additional filtration provided at port B1. Filtration is not provided at ports B2, B3 & B4 due to space constraints and the isolation of the check valve by the actuation piston. External accumulator available in three operating pressure ranges. SAE ports and manifold mounting (bottom and rear) connections on all models. Single acting pallet circuits require 2 hoses to the Operating Handle for pressure release. For single hose systems, see the Manual Shutoff Valve Decoupler in this section. Additional filtration available through the use of manifold mount and in-line filtration. Filter kit model # 62-5600-05 (for in-line mounting) or 62-5600-06 (for manifold mounting).
2.25
NOTE: These automatic shutoff valve decouplers and operating handle must be used with a suitable pump which includes a 4 port/3 position, P-blocked center ("A" & "B" connected to tank) directional control valve for operation of single or double acting systems. See the pump convenience package for the pump model of your choice, “Pallet Decoupler (two hose)” in the Power Supplies Catalog. One automatic shutoff valve decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler outlet port "B" (as shown in the schematic).
2.00
.56
SAE 6 PORT BOTH ENDS
5.41
3x MACHINED FOR 1/4 SHCS
4.62
.38 SAFETY LOCK-OUT HOLE
1.55
2.00
1.30
1.13
2.28
1.75
*Accumulator always recommended on a decoupled circuit even when using a pallet decoupler without external accumulator.
.17
.22
2.61
2.50
2.64 5.00
"B1" QUICK CONNECTOR UNCLAMP
.87 .32
"A1" QUICK CONNECTOR CLAMP 4X DRILLED FOR 1/4 SHCS SAE 6 MANIFOLD MOUNT
1.55
A
J-6
2.13
1.60
1.25
4.25 2.27 4.62
.19 1.24
.19
K-6
ILS560031 REV B
A3
PLUG "B" PORT FOR S/A SYSTEMS
2.27 1.24
B4 A4
100 lb. Tensile Strength
B2 B5 B3
A2 A5
SAE 6 MANIFOLD MOUNT
Pallet Decoupler Cover
B1 C1 A1
Model No.
For use with Decoupler Models
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
A
ILS560022 REV K
56-0005-17, 56-0005-18, 56-0005-19, 56-0005-20, 56-0005-21, 56-0005-22 56-0005-30, 56-0005-40 56-0005-41, 56-0005-44 and 56-0005-45
Decouplers with External Accumulator Model No. Pressure Range (psi) Accumulator Capacity (cu. in.) NOTE: For use with Operating Handle Model No. 56-0005-04. May be used in conjunction with Safety Interlock Storage Module Model No. 56-0005-05. Optional In-Line Filter For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
56-0007-03 5.00
Customers that have previously bought a decoupler can purchase a new cover for their old decoupler. New orders of decouplers will come with cover.
Optional Filters
In-Port (For Manifold Mounting)
Filter Plate (For Manifold Mounting) 70-8420-05 (BOTTOM A5 & B5) OR 70-8420-06 (REAR A4 & B4)
56-0005-41 400-1,500 56-0005-19 1,000-3,500
3.8 3.6
70-0437-71 (Ports A4, B4, B5)
70-0401-71
56-0005-20 2,000-5,000 3.2 56-0005-45 400-5,000 No Accumulator*
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker