Hardware
EZ Spacers, End Effectors
Top Flange Swing Clamp and Push/Pull Cylinder EZ Spacers Dimensions Swing Clamp and Link Clamp EZ Spacers
B
D
E
Standard Swing Clamp or TuffCam ™ Model No. 15-XX05-00/ 14-6X05-01-L/R/S 15-XX09-08/ 14-6X09-01-L/R/S 15-XX13-11/ 14-6X13-01-L/R/S
A
Spacer Model No.
Push/Pull Cylinder Model No.
A B C* D E F
C*
F
24.00 .12
64-0409-01
25-XX05-00 1.45 1.88 1.02 28˚ 1.02 0.75
64-0414-01
25-XX09-08 1.97 2.31 1.45 28˚ 1.32 1.25
B
64-0417-01
25-XX13-11 2.45 2.69 1.77 28˚ 1.63 1.25
F
* For model 14-6213-10- L/R the spacer will not fit as shipped. The “C” dimension must be machined to Ø 1.88 High Pressure Link Clamp EZ Spacers Dimensions Model No. Link Clamp Model No. Link Clamp Capacity A B C D E F
30
D
A
C
E
64-0410-01 16-6X04-00 64-0415-01 16-6X06-00 64-0418-01 16-6X09-00 64-0425-01 16-6X14-00 64-0431-01 16-6X16-00
450
2.19 1.94 1.07 1.06 2.25 0.34
24.00 .12
1,100 2.81 2.50 1.51 1.31 3.00 0.55 2,600 3.50 3.25 1.89 1.63 3.75 0.22 5,000 4.50 4.13 2.51 2.13 4.75 0.23 6,800 5.44 5.13 3.14 2.56 5.75 0.36
ILS640400 REV L
NOTE: 1. Spacers ship in 24” lengths. Customer required to cut spacer to the appropriate length and drill mounting and oil feed holes to the correct size for the applicable clamp. 2. Material is extruded aluminum alloy. A
End Effectors
120
Spherical Contact Points Model No. A B C D E F 64-2104-10 1/4-20 UNC 0.25 0.22 0.47 0.50 0.63 64-2104-20 1/4-28 UNF 0.25 0.22 0.47 0.50 0.63 64-2105-10 5/16-18 UNC 0.25 0.19 0.44 0.75 1.25 64-2105-20 5/16-24 UNF 0.25 0.19 0.44 0.75 1.25 64-2106-10 3/8-16 UNC 0.31 0.25 0.56 0.75 1.25 64-2106-20 3/8-24 UNF 0.31 0.25 0.56 0.75 1.25 64-2107-10 7/16-14 UNC 0.25 0.25 0.50 0.63 0.75 64-2108-10 1/2-13 UNC 0.38 0.31 0.69 0.88 1.50 64-2108-20 1/2-20 UNF 0.38 0.31 0.69 0.88 1.50 64-2109-10 5/8-11 UNC 0.50 0.38 0.88 1.00 2.00 64-2109-20 5/8-18 UNF 0.50 0.38 0.88 1.00 2.00 B C D E 64-2004-10 1/4-20 UNC 0.25 0.28 0.53 0.50 64-2004-20 1/4-28 UNF 0.25 0.28 0.53 0.50 64-2005-10 5/16-18 UNC 0.25 0.38 0.63 0.75 64-2005-20 5/16-24 UNF 0.25 0.38 0.63 0.75 64-2006-10 3/8-16 UNC 0.25 0.44 0.69 0.75 64-2006-20 3/8-24 UNF 0.25 0.44 0.69 0.75 64-2007-10 7/16-14 UNC 0.25 0.38 0.63 0.63 64-2008-10 1/2-13 UNC 0.38 0.50 0.88 0.88 64-2008-20 1/2-20 UNF 0.38 0.50 0.88 0.88 64-2009-10 5/8-11 UNC 0.50 0.56 1.06 1.00 64-2009-20 5/8-18 UNF 0.50 0.56 1.06 1.00 Conical Contact Points Model No. A
B
K-2
E Hex
C
D
L-2
A
SR F
B
Contact points have been Hardened to RC 37-42
C
E Hex
D
ILS642000 REV G
A
120
B
E Hex
C
D
www.vektek.com
800-992-0236 A
© Vektek, July 2024
SR F
Made with FlippingBook - Online magazine maker