Palletized Fixture Accessories
Guardian 1.0
Master Control Unit 33-0110-14 Simple
5.975
4.921
Machine Tool Receiver 33-0111-02
7.87
5.239
3.04
NAVIGATION BUTTONS
LCD DISPLAY
4.72
DIN RAIL MOUNT
5.43
5.435
.316
M12 5 Pin female communication connection to Machine Tool Receiver
2.31
2X 1.260 HIGH FORCE MAGNETS
POSITIONABLE FROM 0-180
M8 3Pin Serial Communication Port (For sending the Fixture Transmitter Unit Number currently being read to customers interface, like the CNC machine controller) Use of this port is not required for basic Guardian functioning
M12 5-PIN MALE COMMUNICATION PORT
M12 8 Pin male connection for machine interface
ILS330112 REV D
3.000 5.000
ILS330115 REV E
4X .20 4X .18 2X .33 HOUSING
2X .59
2.59
Fixture Transmitters Units
40-1030-01 2 DAMPENING GROMMETS INCLUDED
2X 1.57
2X 1.00
2X .51
4X 5.35
4.74
.96
2.44
33-0111-03 One Circuit
33-0111-04 Two Circuits
33-0111-05 Three or Four Circuits
.26
ILS330117 REV D
2.97
5.94
Includes 19.7 IN M8 Shielded Cable P/N 27-7424-01 For Direct Connection to Fixture Transmitter
VEKTEK P/N 33-0111-03 FIXTURE TRANSMITTER UNIT
J-16
Accessories
M12 8 Pin Female Connector
(See Table)
K-24
M8 3 Pin Connection
Female
SAE 4 Male Connection
For Direct Connection to Pressure Switch
Model No. 27-6424-04
ILS330114 REV H
M12 5 Pin Female Connector
M12 5 Pin Male Connector
(See Table)
Pressure Switch Model No. 70-7500-78
Pressure Setter/Checker Model No. 33-0110-15
Model No. 27-7422-05 and 27-9422-01
NOTE: All Guardian cables are shielded and PUR jacketed.
Model No. 27-5222-04
Cables
* Included with 33-0101-10 and 33-0111-10; can be purchased separately for replacement or additional hook up. ** 27-9422-01 is included with 33-0101-10 and 33-0111-10. Cables can be purchased separately for extension or replacement. *** 70-7500-74 Requires user provided 3 Pin M8 shielded cable.
Model No.
Description
Connection
Length (ft)
Cable, M12 8 Pin Master Control Unit Machine Tool Interface* Extension Cable M12 5 Pin Master Control Unit to Machine Tool Receiver Communication Cable** Extension Cable M8 3 Pin Shielded Pressure Switch to Fixture Transmitter
27-6424-04
Female Straight - Open End
32.8
27-9422-01 27-7422-05 27-7424-02 27-7424-01 27-7424-04
32.8 16.4
Female Straight - Male Straight
3.5 2.2 1.2
Female Straight - Male Straight
Pressure Switches 70-7500-78 750-5000 PSI Pressure Switch with 19.7 IN Cable (Shown) 70-7500-74 750-5000 PSI Pressure Switch with M8 Male Connection Only*** 33-0110-15 Pressure Setter / Checker to assist setting mechanical pressure switches Connectors 27-5222-04 Guardian, M8 3 Pin Jumper, use with 33-0111-03, 04, 05.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker