Accessory Valves
Hydraulic Gauges, Over Pressure Cartridges
Standard Pressure Gauges Liquid filled gauges with analog readouts. Available in 1,500 to 10,000 psi. Conform to ANSI standard B40.1 Grade B.
2.7
3.4
SAE 4 male connection. Safety Glass Window. Model No. 72-2121-37 0 to 1,000 psi 72-2121-46 0 to 3,000 psi Pressure Range 72-2121-52 0 to 5,000 psi 72-2121-62 0 to 10,000 psi
SAE 4
.8
.43
Bezel Diameter (in.)
1.2 ILS722100 REV D
2.7 2.7 2.7
SAE 4
A
2.7 Back Mount Pressure Gauges Liquid filled gauges with analog readouts. Available in 1,500, 5,000, 6,000 and 10,000 psi. Conform to ANSI standard B40.1 Grade B.
.4
1.3
ILS721200 REV K
1.8
2.85
SAE 4 male connection. Safety Glass Window. Model No. Pressure Range 72-1221-39 0 to 1,500 psi 72-3221-55 0 to 6,000 psi 72-2121-55 0 to 5,000 psi
2.28 B.C.
2.85
Model No. 72-0000-00 For use with gauges 72-1221-39 and 72-3221-55 Gauge Protector 2X 1/4 Capscrew Mounting Holes
2.28 B.C.
1.71
2.85
1.71
2.28 B.C.
1.71
12 Characters optional custom text. Examples: -A: 3,000 PSI -Circuit B -Sys. Pressure
Bezel Diameter A (in.)
12 Characters optional custom text. Examples: -A: 3,000 PSI -Circuit B -Sys. Pressure
12 Characters optional custom text. Examples: -A: 3,000 PSI -Circuit B -Sys. Pressure
1.66 1.66
Coolant Drain Both Sides
2X 1/4 Capscrew Mounting Holes
Coolant Drain Both Sides
2.7
ILS720000 REV C
2X 1/4 Capscrew Mounting Holes
1.90 Coolant Drain Both Sides
72-2121-65 0 to 10,000 psi 2.7 To extend the life of Pressure Gauges, run your system at no more than 75% of the gauge scale.
ILS720000 REV C
1.90
ILS720000 REV C
72-0000-00-C For Custom Text Call to Order Special Engraving
Text required at order placement. (Limit 12 Characters) Examples: Private Labeling or Logo on top. With 12 additional custom characters
Model No Set Point (psi) A (in.) 70-6336-71-03 300
Protect Your Low Pressure Devices running within a High Pressure System
70-6336-71-04 70-6336-71-05 70-6336-71-06 70-6336-71-07 70-6336-71-08 70-6336-71-09 70-6336-71-10 70-6336-71-11 70-6336-71-12 70-6336-71-13 70-6336-71-14 70-6336-71-15 70-6336-72-18 70-6336-72-20 70-6336-72-23 70-6336-72-25 70-6336-73-30 70-6336-73-35 70-6336-73-40 70-6336-70-45 70-6336-70-50 70-6336-70-55 70-6336-70-60
400 500 600 700 800 900
M-20
Valve cartridge will open to bleed off excess pressure in the event of over-pressurization. Screw in valve cartridge adds an extra SAE 4 male connection. Valve cartridge has a tamper proof plug. Vektek recommends a set point of approximately 20% higher than system pressure. Leak-free operation before and after re-seat condition. The only valve cartridge designed element of assurance in systems where you must use a pressure sensitive device.
1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 3500 4000 4500 5000 5500 6000
1.77
SAE 4
OVER PRESSURE RELIEF HOLE
to bleed off excess pressure and re-seat at approximately 80% of set point.
.75
A
1.64
ILS706300 REV H
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker