Palletized Fixture Accessories
Automatic Shutoff Valve Decouplers, Two-Handed Operating Handle
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems Decouplers are a convenient, self-contained package that includes quick connect couplings, filters, pilot operated check valve, an over pressure relief valve. Robust pilot operated check valve with a 1:5 pilot to check ratio for proven long term reliability. Internal 25 micron filters for added protection of the pilot operated check valve through ports A1, A2, A3, A4 and C1. Additional filtration at port B1. No filtration at remaining ports. Integral accumulator available in three operating pressure ranges. SAE ports and manifold mounting (bottom and rear) connections on all models. Single acting pallet circuits require 2 hoses to the Operating Handle for pressure release. For single hose systems, see the Manual Shutoff Valve Decoupler in this section. Additional filtration available through the use of manifold mount and in-line filtration. Filter kit model # 62-5600-05 (for in-line mounting) or 62-5600-06 (for manifold mounting).
New 25 Micron Filters
NOTE: These automatic shutoff valve decouplers and operating handle must be used with a suitable pump, which includes a 3-position/4-port, P-blocked center ("A" & "B" connected to "tank") directional control valve for operation of single or double acting systems. One automatic shutoff decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler port "B" (as shown in the schematic).
.80
3x MACHINED FOR 1/4 SHCS
SAE 6 PORT BOTH ENDS
1.55
1.07
3.50
1.30
1.06
2.28 1.75
.22
1.13
.17
1.06
2.61
2.64 5.00
.87 .32
2.50
A1, Clamp Quick Coupler
B1, Unclamp Quick Coupler
"B1" QUICK CONNECTON UNCLAMP
"A1" QUICK CONNECTOR CLAMP 4x DRILLED FOR 1/4 SHCS SAE 6 MANIFOLD MOUNT
30% LIGHTER
PLUG "B" PORT FOR S/A SYSTEMS
2.13
B3 A3
1.25
B2 B4
A2 A4
4.25 2.27 2.27 4.62
1.24
.19
.19
Male JIC 6
ILS560007 REV P
1.24
Two-Handed Operating Handle Model No. 56-0005-04 For use with Decoupler Models 56-0005-17, 56-0005-18, 56-0005-19, 56-0005-20, 56-0005-40, 56-0005-41 or 56-0005-45. Note: These Automatic Shutoff Valve Decouplers and Operating Handle must be used with a suitable pump, which includes a 3-Position/4-Port, P-Blocked Center ("A" & "B" connected to "Tank") Directional Control Valve for operation of single or double acting systems. One Automatic Shutoff Decoupler can be used to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the Decoupler Port "B" (as Shown in the Schematic).
1.13
B1 C1 A1
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
2.53
J-5
SAE 6 MANIFOLD MOUNT
ILS560021 REV H
N-8
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish. NOTE: For use with Operating Handle Model No. 56-0005-04. May be used in conjunction with Safety Interlock Storage Module Model No. 56-0005-05.
Decouplers with Integral Accumulator
Optional Filters
Optional In-Line Filter
Accumulator Capacity (cu. in.)
Model No.
Pressure Range (psi)
In-Port (For Manifold Mounting)
Filter Plate (For Manifold Mounting) 70-8420-05 (BOTTOM A4 & B4) OR 70-8420-06 (REAR A3 & B3)
56-0005-40 400-1,500 56-0005-17 1,000-3,500 56-0005-18 2,000-5,000
3.8 3.6 3.2
70-0401-71
70-0437-71
© Vektek, August 2026
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker