Accessory Valves
Pressure Reducing Valve Control Block
PRV Control Blocks Control pressure independently on both the clamp and unclamp side of the fixture regardless of pump pressure setting. Eliminate the wait for full system pressure to finish cycling workholding components. For use in double or single acting systems. DO3 Mounting, use on pump stack or as a remote mounted valve. n Recommended Filtration: 25 Micron (NOM) / 40 Micron (ABS) (minimum).
B
Pressure Adjustment Screw
A
3.63
1.97
Dual PRV Control Block Model No. Inlet Pressure*
.99
1.19
Set Pressure
Locknut
TYP 2
Range Repeat A B
Manifold Mount Valve Assembly 70-8425-50 5,000 psi 750 to 4,500 psi ± 7% 3.5 10.643 70-8425-53 < 3,000 psi 150 to 900 psi ± 10% 4.2 12.117 >3,000 psi 300 to 900 psi *Maximum Inlet Pressure for PRV is 5,000 psi
.96
2.00
1.000
1.61
D03 MOUNTING PATTERN O-RINGS PROVIDED
.218 THRU TYP 4
ILS708401 REV E
Pressure Adjustment Screw
A
3.63
.09
1.97
L-15
.99
1.19
M-15
Locknut
.96
Single PRV Control Block Model No. Inlet Pressure*
2.00
1.000
Set Pressure
Range Repeat A
1.61
DO3 MOUNTING PATTERN 0-RINGS PROVIDED
Manifold Mount Valve Assembly
.218 THRU TYP 4
ILS708402 REV D
70-8425-51 5,000 psi
750 to 4,500 psi ± 7% 3.5
< 3,000 psi >3,000 psi
150 to 900 psi 300 to 900 psi
70-8425-52
± 10% 4.2
*Maximum Inlet Pressure for PRV is 5,000 psi
NOTE: Maximum system flow rate is 1.5 gpm (346.5 cu. in. per minute) for all VektorFlo ® special function valves, unless noted.
Excess flow voids warranty.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker