Accessory Valves
Pressure Limiting Valve
Pressure Limiting Valve Recommended for use in single acting systems only. Direct acting, poppet style, adjustable, cartridge type construction. Cartridge may be installed directly into your manifold. All pressure limiting valve configurations are designed to operate with up to 5,000 psi on the inlet (P) port. Seal Material: Internal seals are nylon. Internal adjustment discourages tampering with pressure adjustment setting. Two-port design eliminates need for third fluid line to drain bypass flow (internal leakage) back to system reservoir. n Recommended Filtration: 25 Micron (NOM) / 40 Micron (ABS) (minimum). a Normally Open (N/O) pressure control device. The valve remains open and fluid flows freely to downstream devices (from the valve to devices) until the pressure in the valve reaches the pressure (adjustable) set-point. At set-point pressure the valve closes, blocking further flow and pressure rise to the downstream devices. The internal valve seal Operation: The Pressure Limiting Valve (PLV) is
DON’T
DO
Pressure Adjustment Ranges Model No. Range Factory Preset
Cartridge Model
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in. R a surface finish.
750 psi to 2,500 psi 1,000 psi to 3,500 psi 1,500 psi to 5,000 psi
70-5400-08
1,000 psi
70-5430-08
70-5400-07
1,500 psi
70-5430-07
prevents fluid flow through the valve in either direction until the inlet pressure (power source to the valve) is reduced to near zero.
70-5400-06
2,000 psi
70-5430-06
*SAE 2 Ports are counterbored for O-Rings that are used in manifold mounting applications. 0.09/0.15 dia feed holes.
NOTE: Maximum system flow rate is 1.5 gpm
(346.5 cu. in. per minute) for all VektorFlo ® special function valves unless otherwise noted.
Filter Plate For above Valves Model No. 70-8420-02
Order a Filter Plate to protect valve from debris. (More details end of section)
Excess flow voids warranty.
L-17
1.12 Hex
1.25
M-17
Pressure Adjustment Screw
Manifold Mount O-rings Provided
2.00
3X .28 Thru
2X .25
4.73
2X .77
1.50
2X 1.46
1.63 2.12
1.50
.50
.63
.63
1.31
.25
2.50
1.25
*SAE 2 High
*SAE 2 Reduced Pressure Port (Outlet)
SAE 4 High Pressure Port (Inlet)
SAE 4 Port for Optional Gauge in Reduced Pressure Circuit
SAE 4 Reduced Pressure Port (Outlet)
Pressure Port (Inlet)
Pressure Limiting Valve Assembly 70-5400-06, 70-5400-07, & 70-5400-08
ILS705400 REV H
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker