Accessory Valves
Over Pressure Cartridges
Over Pressure Cartridges Protect Your Low Pressure Devices running within a High Pressure System
Valve cartridge will open to bleed off excess pressure in the event of over-pressurization. Screw in valve cartridge adds an extra SAE 4 male connection. Valve cartridge has a tamper proof plug. Vektek recommends a set point of approximately 20% higher than system pressure. Leak-free operation before and after re-seat condition. The only valve cartridge designed element of assurance in systems where you must use a pressure sensitive device.
Model No Set Point (psi) A (in.) 70-6336-71-03 300
70-6336-71-04 70-6336-71-05 70-6336-71-06 70-6336-71-07 70-6336-71-08 70-6336-71-09 70-6336-71-10 70-6336-71-11 70-6336-71-12 70-6336-71-13 70-6336-71-14 70-6336-71-15 70-6336-72-18 70-6336-72-20 70-6336-72-23 70-6336-72-25 70-6336-73-30 70-6336-73-35 70-6336-73-40 70-6336-70-45 70-6336-70-50 70-6336-70-55 70-6336-70-60
400 500 600 700 800 900
to bleed off excess pressure and re-seat at approximately 80% of set point.
1000 1100 1200 1300 1400 1500 1750 2000 2250 2500 3000 3500 4000 4500 5000 5500 6000
SAE 4
OVER PRESSURE RELIEF HOLE
1.77
L-23
.75
A
M-23
1.64
ILS706300 REV H
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker