Work Supports / Spring & Air Advance
Features
B-14
Spring Advance
Standard Features Highly repeatable; plus or minus 0.0002 inches.
1000 & 2500 lb. 1000 & 2500 lb.
7500, 12500, & 20000 lb. 7500, 12500 & 20000 lb. ILS100500 REV L
7500, 12500, & 20000 lb.
1000 & 2500 lb.
ILS100500 REV L
ILS100500 REV L
n Standard Work Supports may be bolted up or down to mount directly on fixture plates. They may also be installed through a hole in the fixture and locked in place using retaining collars for easy adjustment. Standard SAE porting is located in the base of the support for easy access to both the clamp and vent ports (bronze filter installed before shipping). Design features ensure VektorFlo ® work supports last longer, stand up to harsh environments and abuse better than other models without these features. Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports. Special corrosion resistant plungers and sleeves reduce the tendency to stick. Special large diameter plungers and sleeves provide greater rigidity. Cartridge mount work supports available in all styles for installation into customer machined cavities.
Air Advance
1000 & 2500 lb. 1000 & 2500 lb.
7500, 12500 & 20000 lb.
000 & 2500 lb.
ILS100600 REV N 7500, 12500 & 20000 lb. ILS100600 REV N 7500, 12500 & 20000 lb.
ILS100600 REV N
www.vektek.com
800-992-0236
© Vektek, January 2023
Made with FlippingBook - Online magazine maker