Work Supports / Spring & Air Advance
Cartridge Cavities
Spring Advance and Air Advance Cartridge Mount Cavity Check List Confirm capacity of item selected. Note the sealing surface finish requirements. Minimum depth specification represents the nominal depth of the standard Vektek base dimension. Confirm cavity drawing is appropriate for the model number used. Note specified thread depth when cutting threads. When using a bottoming tap tool, modifications may be required. When hand tapping threads, perpendicularity is essential. The “fluid” passage is located on the outer diameter and “vent” passage is in the center.
B-20
1,000 lb.
.002 -A- .002
.109 MAX. THRU TO AIR/VENT PASSAGE ANYWHERE ON OR INSIDE A .15" RADIUS
.535 MIN
(.210) THREAD DEPTH
.210 .020 (THREAD DEPTH)
A
R.15
SEE DETAIL A
R.020 MAX
( .953) -A-
R.41
63
DETAIL A SCALE 4.000
A
Ø.953±.001 x .535 MINIMUM DEEP THREAD 1-16 UN x .210±.020 WITH Ø1.02 X 45° CHAMFER .002 -A-
Ø.094 (MIN) DRILL THRU TO Ø.109 HOLE (TYP)
.150 MIN.
.109 MAX. THRU TO FLUID PASSAGE ANYWHERE ON A .41" RADIUS
SECTION A-A
WORK SUPPORT CAVITY DIMENSIONS: #1000 SPRING ADVANCE 10-0506-10 #1000 AIR ADVANCE 10-0606-10 (TORQUE TO 30 Ft.Lbs.)
ILS100504 REV J
2,500 lb.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker