Swing Clamps and Arms
Top Flange
Single And Double Acting n Three cams for accurate arm positioning, smoother rotation and lower per cam surface contact pressure. n Patented ball seat for improved rotary function, cam follower contact, reduced dynamic and static friction. n Fluorocarbon wipers are standard for improved coolant compatibility. n Tungsten Carbide ball material for strength and wear. n Same mounting envelope as standard VektorFlo ® Swing Clamps. Manifold fitting Model No. 30-8711-20, adapter assembly and plugs are included and shipped with the clamp. See Section H.
C-5
ILS146001 REV S SINGLE ACTING DOUBLE ACTING
U. S. Patent No. 7,032,897
n TuffCam™ Clocking feature (page C-2). n Arms sold separately – see end of section. Can be manifold mounted or plumbed (use standard SAE). Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.
Port X Depth For Optional In-Port Valves *****
Effective Piston Area (sq. in.)
Oil Capacity (cu. in.) ****
Vertical Clamp Stroke (in.) ***
Total Stroke (Swing + Vertical)
Clamp Swing Direction
Cylinder Capacity (lbs.)**
Standard Arm Length **
Model No.
Body Dia.
Retract
Extend Retract
Single Acting (S/A) 14-6105-01-R Right 14-6105-01-S Straight 14-6109-01-R Right 14-6105-01-L Left 14-6109-01-S Straight 14-6113-01-R Right 14-6113-01-S Straight 14-6118-02-R Right 14-6109-01-L Left 14-6113-01-L Left 14-6118-02-S Straight Double Acting (D/A) 14-6205-01-R Right 14-6205-01-S Straight 14-6209-01-R Right 14-6205-01-L Left 14-6209-01-S Straight 14-6213-01-R Right 14-6213-01-S Straight 14-6218-02-R Right 14-6118-02-L Left 14-6209-01-L Left 14-6213-01-L Left
Cylinders, actuated hydraulically 1 direction, spring returned.
.22 .22 .57 .31 .31 .79 .50 .50 .62 .62 .22 .22 .57 .31 .31 .79 .50 .50 .62 .62
450
0.57 0.99 1.06
0.098
N/A 0.056 SAE 2 X .48
1,100
0.79 1.43 1.50
0.295
N/A 0.233 SAE 4 X .58
2,600
1.16 1.74 2.00
0.626
N/A 0.726 SAE 4 X .58
1.16
5,000
1.65 2.37 2.50
1.178
N/A 1.955 SAE 4 X .75
1.65
Cylinders, actuated hydraulically both directions.
450
0.57 0.99 1.06
0.098 0.142 0.056 SAE 2 X .48
1,100
0.79 1.43 1.50
0.295 0.475 0.233 SAE 4 X .58
2,600
1.16 1.74 2.00
0.626 1.423 0.726 SAE 4 X .58
1.16
5,000
1.65 2.37 2.50
1.178 3.992 1.955 SAE 4 X .75
14-6218-02-L
Left
14-6218-02-S Straight
1.65
WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation. ** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.) *** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.
**** To ensure maximum service life and trouble-free operation, restrict fluid flow per table on page C-2. ***** In-Port valves require the use of manifold mount ports.
Dimensions Single Acting Model No.
Double Acting Model No.
Clamp Capacity (lbs.)
A B C D E F G H
14-6105-01- L, R, S 14-6205-01- L, R, S 14-6109-01- L, R, S 14-6209-01- L, R, S 14-6113-01- L, R, S 14-6213-01- L, R, S 14-6118-02- L, R, S 14-6218-02- L, R, S
450
.99 4.28 4.02 2.02 .94 .75 .31 .437 1.43 5.68 5.32 2.60 1.21 1.03 .38 .625 1.74 7.34 6.82 3.35 1.30 1.06 .41 .875 2.37 9.92 9.29 4.41 1.80 1.47 .54 1.250
1100 2600 5000
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker