Swing Clamps and Arms
Cartridge Mount
Single And Double Acting n Available in three capacities from 450 to 2,600 lb. using a standard VEKTEK arm at 5,000 psi. n Three cams for accurate arm positioning, smoother rotation and lower per cam surface contact pressure. n Patented ball seat for improved rotary function, cam follower contact, reduced dynamic and static friction. n Fluorocarbon wipers are standard for improved coolant compatibility. n Tungsten-Carbide cam followers for improved strength and wear. n Same mounting envelope as standard VektorFlo ® Swing Clamps. n Arms sold separately – see end of section. n Arm clocking feature is compatible with all standard Vektek arms.
C-13
U. S. Patent No. 7,032,897
ILS141100 REV F SWING CLAMP PLUNGER SHOWN IN THE EXTENDED LH CAM POSITION SINGLE ACTING DOUBLE ACTING
Vertical Clamp Stroke (in)***
Total Stroke (Swing + Vertical)
Effective Piston Area (sq. in.)
Oil Capacity (cu. in.)****
Cylinder Capacity (lbs.)**
Standard Arm Length
Model No.
Clamp Swing
Body Thread
Retract
Extend Retract
Single Acting (S/A)
Cylinders, actuated hydraulically 1 direction, spring returned.
14-1105-01-R Right
.22 .22 .57 .31 .31 .79 .50 .50 .22 .22 .57 .31 .31 .79 .50 .50
14-1105-01-L
Left
450
0.57 1 1/16-12 1.06
0.098
N/A
0.056
14-1105-01-S Straight 14-1109-01-R Right 14-1109-01-S Straight 14-1113-01-R Right 14-1109-01-L Left
1,100
0.79 1 5/8-12
1.50
0.295
N/A
0.233
2,600
1.16 1 7/8-12
2.00
0.626
N/A
0.726
14-1113-01-L
Left
14-1113-01-S Straight
1.16
Double Acting (D/A)
Cylinders, actuated hydraulically both directions.
14-1205-01-R Right
14-1205-01-L
Left
450
0.57 1 1/16-12 1.06
0.098
0.142
0.056
14-1205-01-S Straight 14-1209-01-R Right 14-1209-01-S Straight 14-1213-01-R Right 14-1209-01-L Left
1,100
0.79 1 5/8-12
1.50
0.295
0.475
0.233
14-1213-01-L
Left
2,600
1.16 1 7/8-12
2.00
0.626
1.423
0.726
14-1213-01-S Straight
1.16
WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation. ** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000 and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.) *** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke. **** To ensure maximum service life and trouble-free operation, restrict fluid flow per table on page C-2.
Dimensions Model No.
Capacity (lbs.)
A
B
C D E
F
G H
J
Single Acting (S/A) 14-1105-01- L,R,S
450 1 1/16-12 4.25 4.00 2.12 0.83 0.63 0.49 0.438 1/4-28 x 0.28 14-1109-01- L,R,S 1,100 1 5/8-12 5.66 5.31 2.68 1.13 0.94 0.65 0.625 3/8-24 x 0.47 14-1113-01- L,R,S 2,600 1 7/8-12 7.32 6.80 3.15 1.49 1.25 0.55 0.875 1/2-20 x 0.52 Double Acting (D/A) 14-1205-01- L,R,S 450 1 1/6-12 4.25 4.00 2.12 0.83 0.63 0.49 0.438 1/4-28 x 0.28 14-1209-01- L,R,S 1,100 1 5/8-12 5.66 5.31 2.68 1.13 0.94 0.65 0.625 3/8-24 x 0.47 14-1213-01- L,R,S 2,600 1 7/8-12 7.32 6.80 3.15 1.49 1.25 0.55 0.875 1/2-20 x 0.52
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker