Swing Clamps and Arms
Low Profile Magnetic Position Sensing
Magnetic Position Sensing Swing Clamps n TuffCam™ Low Profile Swing Clamps 5,000 lbs and 7,500 lbs models only. n Sensors sold separately. n Sensor mounting housing is concentric to plunger shaft. n For use with Double Acting clamps only. n TuffCam™ Clocking feature uses standard length Vektek arm. Optional In-Port Flow Control is a meter-in device with reverse free flow check valve. Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve. Sensor Kits Order Separately 62-2970-00 PNP Position Sensing Kit includes: a 29-7001-00 Sensor and a 27-6424-00 Cord set 62-2970-01 NPN Position Sensing Kit includes: a 29-7001-01 Sensor and a 27-6424-00 Cord set The use of NPN or PNP is determined by the type of control unit to which the sensor is connected. One Sensor is required for each sensing position.
C-24
1.75
.22 A
1.00
increments) in 15 is controllable (radial orientation T-Slot for sensor
Approx. 15 in. Sensor
Approx. 196 in. Cordset
BN
1 4 3
+ -
BN BK BU
+ -
NPN
1 4 3
BK BU
PNP
Model No. 62-2970-01 Schematic
Model No. 62-2970-00 Schematic
Low Profile Magnetic Position Sensing System Model No. Clamp Swing Direction Cylinder Capacity (lbs.) A (in.)
ILS140027
REV E
Port X Depth for Optional In-Port Valves *
TuffCam ™ Bottom Flange (D/A) Cylinders actuated hydraulically both directions
14-2818-00-PS 14-2818-01-PS 14-2818-02-PS 14-2221-00-PS 14-2221-01-PS 14-2221-02-PS 14-0618-00-PS 14-0618-01-PS 14-0618-02-PS 14-0621-00-PS 14-0621-01-PS 14-0621-02-PS 14-2818-03-PS 14-2818-04-PS 14-2818-05-PS 14-2221-03-PS 14-2221-04-PS 14-2221-05-PS 14-0618-03-PS 14-0618-04-PS 14-0618-05-PS 14-0621-03-PS 14-0621-04-PS 14-0621-05-PS
Right
5,000
2.58
SAE 4 X .75
Left
Straight
Right
7,500
2.58
SAE 4 X .75
Left
Straight
TuffCam ™ Top Flange (D/A) Cylinders actuated hydraulically both directions
Sensor Feature:
- Normally Open Contact - LED Indicator Light
Right
5,000
2.58
SAE 4 X .75
Left
Straight
- 10 to 30 VDC operating range - 3 Watt Maximum Contact Rating - ≤ 0.8 ms Switch-off time - ≤ 1.0 ms Switch-on time
Right
Left
7,500
2.58
SAE 4 X .75
Straight TuffCam ™ Bottom Flange Long Stroke (D/A) Cylinders actuated hydraulically both directions
Right
Left
5,000
3.20
SAE 4 X .75
Straight
Note: For dimensions, force, stroke, etc.
Right
Please Reference Standard Low Profile pages as Position Sensing Cylinders share all specs but the position sensing feature.
Left
7,500
3.20
SAE 4 X .75
Straight TuffCam ™ Top Flange Long Stroke(D/A) Cylinders actuated hydraulically both directions
Right
5,000
3.20
SAE 4 X .75
Left
Straight Right
Left
7,500
3.20
SAE 4 X .75
Straight * In-Port Valves require the use of manifold mount ports.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker