Swing Clamps and Arms
Swing Restrictors and Clocking
Swing Clamp Restrictors Swing Restrictors add just one more element of flexibility when using Vektek TuffCam™ and VersaCam™ Swing Clamps. Normally shipped with the swing angle set to 90˚, you can have swing restrictors added to your clamps to limit the arm swing to 30˚, 45˚ or 60˚of rotation. Restrictors that are factory installed on new clamps will have the clamp specially marked to avoid intermingling clamps with varying swing angles in your shop. Contact your Vektek Customer Service specialist should you need swing angles greater than 90˚.
Swing Clamp Swing Restrictors Model No. Clamp Capacity Swing Restriction 81-5505-30 450 30˚ 81-5505-45 450 45˚ 81-5505-60 450 60˚ 81-5509-30 1,100 30˚ 81-5509-45 1,100 45˚ 81-5509-60 1,100 60˚ 81-5513-30 2,600 30˚ 81-5513-45 2,600 45˚ 81-5513-60 2,600 60˚ 81-5518-30 5,000 30˚ 81-5518-45 5,000 45˚ 81-5518-60 5,000 60˚ 81-5519-30 TC LP SC 5,000 30˚ 81-5519-45 TC LP SC 5,000 45˚ 81-5519-60 TC LP SC 5,000 60˚ 81-5522-30 TC LP SC 7,500 30˚ 81-5522-45 TC LP SC 7,500 45˚ 81-5522-60 TC LP SC 7,500 60˚ ILS150112 REV C
C-32
CLAMP POSITION
30º
45º
60º
90º
Vektek Swing
Restrictors Page C-32
Clocking We have added 2 (two) more clocking features to Vektek’s VersaCam™ Swing Clamp line. Customers have requested additional clocking features to help improve and speed-up arm changes. A drill point on each clamp standardizes arm location at a particular position. An additional 3 orientation drill points reside 90° out from that position and each other. Access to the positioning feature is through the back or side of the arm, making modification a snap for users. Each arm position can have its own specification.
Swing Clamp Arm Clocking Feature Drill points shown in the clamped position. Clocking features 4 @ 90°
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker