Swing Clamps and Arms
Bottom Flange
SAE 2 PORT TOP & BOTTOM UNCLAMP / VENT FOR MANIFOLD MOUNTING*
ORDER ARM SEPARATELY
BREATHER PROVIDED VENT- S/A UNCLAMP- D/A AC PORT
4x AD x 90 ARM CLOCKING FEATURE
N TOTAL STROKE M CLAMP STROKE
Q V
E
J PLUNGER THREAD
C-36
2x X
A
P
6x L*
AC CLAMP OR FLOW CONTROL PORT
H .156 .005
4x R 4x Y*
5x K**
G
F
D
T
C
B
SAE 2 PORT TOP & BOTTOM CLAMP FOR MANIFOLD MOUNTING*
SWING CLAMP PLUNGER SHOWN IN THE EXTENDED LH CAM POSITION
ILS152101 REV Y
Chamfer Fixture Hole 45 X .015 Max.
Optional top or bottom o-ring face seal mounting configuration. Top of flange, o-ring face sealing is not available on models 15-2105-01-L/R/S & 15-2205-01-L/R/S .09-.15 Feeder hole
For proper sealing, mating surface must be flat within 0.003 in. with a maximum 63 µ in.R a surface finish.
A .010 Fixture Hole
4X Thread B
4X C .005
Port Plug
Fixture Plate
G .005
2X E .010
.09-.15 Feeder hole
2X F .010
D .005
For proper sealing, mating surfaces must be flat within .003 in. with a .
.110 .020 Unclamp/ Vent Feed Hole For Manifold Mounting
.110 .020 Clamp
Feed Hole For Manifold Mounting
ILS152102 REV G
Mounting Dimensions Model No.
A B C D E F G 15-2X05-03-X 1.077 10-32 0.375 0.594 0.813 0.375 1.062 15-2X09-04-X 1.515 1/4-20 0.562 0.812 1.125 0.562 0.988 15-2X13-04-X 1.815 5/16-18 0.688 1.000 1.250 0.750 1.214
SWING CLAMP PLUNGER SHOWN IN THE EXTENDED LH CAM POSITION
SINGLE ACTING
DOUBLE ACTING
ILS152100 REV M
J
K L
M N P Q R
T
V X Y AD AC
Cylinders, actuated hydraulically 1 direction, spring returned. 1/4-28 X 0.375 .22 .38 .22 .57 1.50 1.06 .38 1.73 .53 .59 .81 .13 SAE 4 3/8-24 X 0.625 .28 .56 .31 .79 2.00 .99 .56 2.41 .75 .81 1.13 .19 SAE 4 1/2-20 X 0.750 .34 .75 .50 1.16 2.50 1.21 .69 2.72 .94 1.00 1.25 .19 SAE 4 Cylinders, actuated hydraulically both directions. 1/4-28 X 0.375 .22 .38 .22 .57 1.50 1.06 .38 1.73 .53 .59 .81 .13 SAE 4 3/8-24 X 0.625 .28 .56 .31 .79 2.00 .99 .56 2.41 .75 .81 1.13 .19 SAE 4 1/2-20 X 0.750 .34 .75 .50 1.16 2.50 1.21 .69 2.72 .94 1.00 1.25 .19 SAE 4 Order arms separately.
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker