Swing Clamps and Arms
Standard Length and Upreach
.02
C
J
N
M
H
G
K
L
C-40
RADIUS B
RADIUS E
F*
D
ILS915200 REV N
A
Standard Arm Dimensions
* For arms without threaded holes, order Model No. 91-52XX-00
Cylinder Capacity (lbs.)
Model No.
A B C D E F G H J
K
L
M N
91-5205-01 450 1.06 0.38 0.28 0.38 0.19 10-24 0.23 0.28 68 1/4-28 0.438-0.440 0.50 0.60 91-5209-01 1,100 1.50 0.50 0.41 0.50 0.25 5/16-18 0.24 0.31 65 5/16-24 0.625-0.627 0.71 0.85 91-5213-01 2,600 2.00 0.69 0.53 0.66 0.37 3/8-16 0.45 0.37 65 3/8-24 0.875-0.877 1.00 1.25 91-5218-01 5,000 2.50 1.00 0.66 0.97 0.56 5/8-11 0.58 0.56 65 5/8-18 1.250-1.252 1.44 1.73
NOTE: Please reference beginning of section for “Swing Clamp Application and Clocking” of drilled and tapped hole for clocking.
B
A
C
H RADIUS
G RADIUS F
2X D RADIUS
E
Q
ILS915201 REV J
60
K
J
N
P
L
M
Upreach Arm Dimensions
Cylinder Capacity (lbs)
Model No.
ABCDEFGHJKL
M N P Q
91-5205-06 91-5209-06 91-5213-06 91-5218-06
450
1.25 0.63 0.75 0.19 0.38 0.28 0.25 0.19 1.00 0.50 0.25 0.4380/0.4400 0.54 0.63 1/4-28
1,100 1.75 0.75 1.00 0.25 0.50 0.41 0.34 0.25 1.38 0.66 0.32 0.625/0.627 0.80 0.88 5/16-24 2,600 2.50 1.03 1.38 0.38 0.66 0.53 0.50 0.38 2.00 1.00 0.44 0.875/0.877 1.15 1.25 3/8-24 5,000 3.00 1.50 2.00 0.56 0.97 0.66 0.63 0.56 2.75 1.31 0.53 1.250/1.252 1.66 1.75 5/8-18
www.vektek.com
800-992-0236
© Vektek, July 2024
Made with FlippingBook - Online magazine maker