Swing Clamps and Arms
Extended, Arm Length and Pressure Limitations
C-41
F
RADIUS C
K
A
B
.02
D
Arm lengths and pressures operating at or below the curves shown are in the safe operating zones for the clamp model indicated. NOTE: Please reference beginning of section for “Swing Clamp Application and Clocking” of drilled and tapped hole for clocking.
H
N
M
G
L
J
ILS915202 REV K
E
Extended Arm Dimensions
Cylinder Capacity (lbs.)
Model No.
A B C D E F G H J
K
L
M N
91-5205-02 91-5209-02 91-5213-02 91-5218-02
450
3.25 1.07 0.38 0.28 0.38 0.41 0.32 22 0.28 1/4-28 0.4380/0.4400 0.50 0.60 5.37 1.32 0.50 0.41 0.50 0.56 0.50 25 0.31 5/16-24 0.625/0.627 0.71 0.88 6.37 2.03 0.69 0.53 0.66 0.75 0.60 25 0.37 3/8-24 0.875/0.877 1.00 1.23 6.50 2.80 1.00 0.66 0.97 1.13 0.73 25 0.56 5/8-18 1.250/1.252 1.44 1.73
1,100 2,600 5,000
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker