Swing Clamps and Arms
TuffCam™ Low Profile Upreach and Double Ended
2X D RADIUS
C RADIUS
B
J
A
C-47
N
30
F
H
M L
G
K CAP SCREW INCLUDED
E
ILS915210 REV N
TuffCam™ Low Profile Upreach Arm Dimensions Model No.* Cylinder Capacity A B C D E
F G H J
K
L M N
91-5218-15 91-5221-09
5,000 7,500
3.00 2.00 0.56 0.56 1.2500/1.2520 2.75 1.44 0.53 0.884 M16 x 1.5 1.63 1.75 1.50 3.19 2.73 0.56 0.56 1.5005/1.5025 3.00 1.56 0.53 1.009 M16 x 1.5 1.88 1.75 1.62
* Use 91-5218-15 with the low profile swing clamps, models 14-0518-XX, 14-0618-XX 14-2718-XX and 14-2818-XX only. Use 91-5221-09 with low profile swing clamps models 14-0521-XX, 14-0621-XX, 14-2121-XX and 14-2221-XX only. NOTE: Replacement Cap Screw for 91-5218-15 and 91-5221-09 is model number 21-5000-25.
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
B (TYP)
C (TYP)
K RADIUS
A
2A
H
L°
F
D (TYP)
G
E
J (CAP SCREW INCLUDED)
ILS915212 REV M
TuffCam™ Low Profile Double Ended Arm Dimensions Model No. Cylinder Capacity A 2A B C D E
F G H J
K L
91-5218-14* 91-5221-08**
5,000 7,500
5.50 11.00 2.80 1.13 0.73 1.250/1.252 1.75 0.50 0.884 M16 X 1.5 1.00 25 7.10 14.20 1.75 1.19 1.33 1.5005/1.5025 1.75 0.56 1.009 M16 X 1.5 1.37 25
* 91-5218-14 For use with low profile swing clamp model 14-2718-XX and 14-2818-XX. ** 91-5221-08 For use with low profile swing clamp model 14-0521-XX, 14-0621-XX, 14-2121-XX and 14-2221-XX only.
It is recommended that the cross bolt is replaced if the arm needs to be removed after it has been in service.
NOTE: Replacement Cap Screw for 91-5218-14 is PN 21-5000-24. Replacement Cap screw for 91-5221-08 is PN 21-5000-28.
© Vektek, July 2024
800-992-0236
www.vektek.com
Made with FlippingBook - Online magazine maker