7 MPa Work Supports
Features, Capacity, Flow Rates
Standard Features Highly repeatable work supports, repeat position ±0.005 mm. Designed for maximum capacity in a minimal envelope. Collet Locking provides a tremendous mechanical advantage for use in 7 MPa applications. Piston areas have been optimized for increased holding force and safety. Available with a high or low contact spring force. Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports. Supports can be manifold mounted or plumbed. Install cartridge mount work supports into customer machined cavities. Easy-access standard G 1/4 and G 1/8 porting to both the clamp and vent ports for remote venting or air purge. (Bronze filter installed before shipping). Special corrosion resistant high quality bearing grade stainless steel plunger and collet assembly reduces the tendency to stick.
B-2
Spring Advance
Fluid Advance
Work Support Capacity Graph
Work Support Capacity
10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0
Operating Pressure (MPa)
Support Capacity (kN)
7.0 3.0 4.0 5.5 10.0 16.0 26.0 6.5 2.8 3.7 5.0 9.2 14.7 23.8 6.0 2.5 3.3 4.6 8.3 13.3 21.7 5.5 2.3 3.0 4.1 7.5 12.0 19.5 5.0 2.0 2.7 3.7 6.7 10.7 17.3 4.5 1.8 2.3 3.2 5.8 9.3 15.2 4.0 1.5 2.0 2.8 5.0 8.0 13.0 3.5 1.3 1.7 2.3 4.2 6.7 10.8 3.0 1.0 1.3 1.8 3.3 5.3 8.7 2.5 0.8 1.0 1.4 2.5 4.0 6.5 NOTE: Work Support maximum operating pressure is 7 MPa. Operating Work Supports above this maximum may damage the devices and will void product warranty.
26kN
16kN
10kN
5.5kN
4kN
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
3kN
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
Operating Pressure (MPa)
ILML10003 REV C
Self-Produced Contact Bolts S/A Work Supports Model No. L1-0X10-XXX L1-0X12-XXX L1-0X15-XXX L1-0X16-XXX L1-0X20-XXX L1-0X22-XXX Capacity 3 kN 4 kN 5.5 kN 10 kN 16 kN 26 kN O-Ring Part No. 39-0511-18 39-0511-08 39-0510-91 39-0511-32 O-Ring Size (I.D.xC.S.) 4.5 x 1.5 5.5 x 1.5 7.5 x 1.5 8.75 x 1.8 A 4.55 5.75 7.80 9.35 B 9.0 11.5 12.5 16.5 C 3.35 4.35 5.75 6.88 D 9.0 9.0 9.0 9.0 E 6.25 6.25 6.25 6.0 F 1.75 1.75 1.75 2.0 G M6 x 1.0 M8 x 1.25 M10 x 1.5 M12 x 1.75 For All 7 MPa Work Supports
A 0.05
F 0.13
G THREAD
45
D
E
C 0.13
A 0.05
MIN. B
F 0.13
ILML10100 REV E
G THREAD
www.vektek.com
1-800-992-0236
© Vektek February 2021
45
D
E
Made with FlippingBook - professional solution for displaying marketing and sales documents online