Vektek Low Pressure 7MPa Catalog

TuffCam ™ 7 MPa Swing Clamps

Clevis Plunger Top Flange

Double Acting n All left or right swing clamps swing 90°. Clamps available in 6 retract capacities ranging from 2.2 kN to 24.1 kN. Designed to operate at 7 MPa. n Use double ended Rocker Arms to apply equal force on two surfaces of different heights. n Maximum allowable arm travel for work piece height variation is ± 10° n Two standard arm orientations available (0° and 90°). Request other arm orientations through Vektek. n Clamp repeatability ±0.25° and swing angle repeatability 90° ± 3°. n Consult table at the start of Section C for clamp time and fluid flow rates. n Stainless steel pivot pin, carbon steel retaining rings and rubber centralizing springs included. n Patented ball seat delivers improved rotary function and cam follower contact, while reducing dynamic and static friction. n Tungsten-Carbide ball material; one of the world’s hardest materials. n Arms sold separately in Section D. n Can be manifold mounted or plumbed. n Optional In The Port flow control is a meter-in device with a reverse free flow check valve. n Optional In The Port sequence valve is a pressure sequencing device with reverse free flow check valve.

C-7

ILML14012 REV C

Specifications

L1-4025-10-L L1-4025-10-R L1-4025-10-S

L1-4032-10-L L1-4032-10-R L1-4032-10-S

L1-4040-10-L L1-4040-10-R L1-4040-10-S

L1-4050-10-L L1-4050-10-R L1-4050-10-S

L1-4063-10-L L1-4063-10-R L1-4063-10-S

L1-4080-10-L L1-4080-10-R L1-4080-10-S

Model No.

Add the Clevis orientation indicator to the end of your item number. The indicators are -0 and -90. Include the dash. Double Acting (D/A) Cylinders, actuated hydraulically both directions.

Left Right Straight

Left Right Straight

Left Right Straight

Left Right Straight

Left Right Straight

Left Right Straight

Swing Direction

Cylinder Capacity* (kN)

2.2

3.8

6.1

9.4

14.7

24.1

Bore Size (mm)

25

32

40

50

63

80

Vertical Clamp Stroke** (mm)

8

8

10

12

14

14

Total Stroke (Swing + Vertical) (mm) Effective Piston Area (cm 2 ) Retract

18.5

19.5

25.0

30.0

32.0

35.0

3.14

5.50

8.76

13.47

21.00

34.36

Oil Capacity*** (cm 3 ) Extend Oil Capacity*** (cm 3 ) Retract

9.1

15.7

31.4

58.9

99.8

175.9

5.8

10.7

21.9

40.4

67.2

120.3

Port X Depth for Optional In The Port Valves****

G 1/8 X 15.16

G 1/8 X 15.16

G 1/8 X 15.16

G 1/4 X 18.72

G 1/4 X 18.72

G 1/4 X 18.72

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation. * Cylinder retract capacities are listed at 7 MPa (70 bar) operating pressure. Divide cylinder retract force by 2 for when using symmetrical length arm. Maximum operating pressure is 10 MPa (100 bar). The minimum operating pressure is 1 MPa (10 bar). The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 7 MPa (70 bar), and multiply the resultant number by your system operating pressure MPa (bar) to obtain the approximate retract force for your application. (Actual force will vary slightly due to internal loading, and/or friction loss.) ** To allow for piece part height variations, it is recommended that the vertical travel be set to about 50% of the vertical stroke. *** To ensure maximum service life and trouble-free operation, restrict fluid flow at the start of Section C. **** In The Port valves require the use of manifold mount ports.

© Vektek January 2019

1-800-992-0236

www.vektek.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online