TuffCam ™ 7 MPa Swing Clamps
Clevis Plunger Bottom Flange
Dimensions
L1-4125-10-L L1-4125-10-R L1-4125-10-S
L1-4132-10-L L1-4132-10-R L1-4132-10-S
L1-4140-10-L L1-4140-10-R L1-4140-10-S
L1-4150-10-L L1-4150-10-R L1-4150-10-S
L1-4163-10-L L1-4163-10-R L1-4163-10-S
L1-4180-10-L L1-4180-10-R L1-4180-10-S
Model No.
Add the letter -L or -S to the end of your model number to indicate swing direction. Add -0, -30, -60, -90, -120 or -150 to the end of your model number to indicate clevis orientation. Double Acting (D/A) Cylinders, actuated hydraulically both directions. A 120 131.25 159.25 189.25 219.25 252.25 B 40 47 56 70 85 103 C 54.5 58 66 84 98 115.5 D 26 26 26 30 34 35 E 51.5 55.5 71.5 86 97 113 F 20 23.5 28 35 42.5 51.5 G 20 23.5 28 35 42.5 51.5 J 4.8 5.8 6.8 8.8 10.8 12.8 L 13 13 13 15 17 20 M 10 10 13 16 18 23 N G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 G 1/4 P ID 4.0 X CS 3.0 ID 4.0 X CS 3.0 ID 4.0 X CS 3.0 ID 8.0 X CS 3.0 ID 8.0 X CS 3.0 ID 8.0 X CS 3.0 Q 15 18 22 28 36 45 R 8 8 10 12 14 14 S 18.5 19.5 25 30 32 35 T 83.5 87.75 104.25 123.25 139.25 158.25 V 111 119.25 144.25 171.25 195.25 223.25 W 6 8 10 12 16 20 X 8 10 12 15 20 24 Z 24 30.5 36.5 42.5 55.5 68.5 MA 35 42 51 63 77 95 MB 15.5 18.5 22.5 27.5 33.5 41.5 MC 15.5 18.5 22.5 27.5 33.5 41.5 MD M4 M5 M6 M8 M10 M12 ME 26.5 26.5 30 39 45.5 54 MF 10 10 13 16 18 23 MG 3 3 3 6 6 6
C-10
For proper sealing, the mating surface must be flat within 0.08 mm with a maximum surface roughness of 1.6 µm R a
-0 ORIENTATION
-90 ORIENTATION
CLAMP PORT
CLAMP PORT
CLAMP
UNCLAMP
UNCLAMP PORT
UNCLAMP PORT
90
90
SWING
SWING
CLAMP
UNCLAMP
www.vektek.com
1-800-992-0236
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online