Palletized Fixture Accessories
Complete 2-Hand Low Pressure Decoupling Solution
Automatic Shutoff Valve Decouplers for Single and Double Acting Systems n Decouplers are a complete, self contained package for disconnecting a fixture from its power supply while machining. n Everything is there for you: Quick connect coupling, filters, accumulators, pilot operated check valve and over-pressure relief valve! n Robust pilot operated check valve with 1 to 5 ratio of pilot to check pressure for proven long term reliability. n Internal 25 micron filters for added protection of pilot operated check valve thru ports A1, A2, A3, A4 & C1. Additional filtration provided at port B1. (Filtration for A3, B3 or A4, B4 available by purchasing Vektek filter block L7-0842-05 or L7-0842-06 depending on mounting orientation.) n G1/4 ports and manifold mounting (bottom and rear) connections on all models. n Single acting pallet circuits require 2 hoses to the operating handle for pressure release.
3 - 10 MPa
Accumulator Capacity Optional In-Line Filter Cartridge
PLUG "B" PORT FOR S/A SYSTEMS
Optional Filter Plate (For Manifold Mount Filtration) L7-0842-05 (Bottom A4 & B4) or L7-0842-06 (Rear A3 & B3) For use with Operating Handle Model No. L5-6005-04.
See NOTE about pump requirements on next page.
C1 A1 B1
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
SAE 6 PORT. PLUG INSTALLED.
"A1" CLAMP QUICK COUPLER
G1/4 PORT ADAPTER. USE IN END PORT IF REQUIRED. (SHIPPED LOOSE)
"B1" UNCLAMP QUICK COUPLER
"B1" QUICK CONNECTOR UNCLAMP
"A1" QUICK CONNECTOR CLAMP
DRILLED FOR M6 SHCS (4X)
Two - Handed Operating Handle Model No. L5-6005-04 For use with
L5-6005-40 or L5-6005-41
G1/4 MANIFOLD MOUNT
Decoupler Model No.
Features n Maximum working pressure - 10 MPa n Provides a fast, positive connection to the decoupler. n Ergonomic design reduces operator fatigue. n The Two - Handed Handle may be used with the optional Handle Docking Module to assure the hoses are disconnected from the pallet before it is shuttled into the machine.
SPACER. DISCARD IF BOTTOM MANIFOLD MOUNTED. FOR FILTRATION ADD 11,4 THICK FILTER PLATE.
DRILLED FOR M6 SHCS (3X)
G1/4 PORT BOTH ENDS (WITH ADAPTER)
© Vektek January 2019
Made with FlippingBook - professional solution for displaying marketing and sales documents online