Palletized Fixture Accessories
Decoupler with Air
21
AIR
B4
A4
PLUG "B" PORT FOR S/A SYSTEMS
A3
1
A2 A5
B2 B5 B3
61.6
5.6
28.6
21
AIR
B4
A4
PLUG "B" PORT FOR S/A SYSTEMS
A3
B1
28.3 95.3
A1
A2 A5
B2 B5 B3
AIR
28.6
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
38.5
AIR
B1
C1 A1
3X DRILL FOR M6 SHCS
28.3 95.3
G1/4 PORT ADAPTER. USE IN END PORT IF REQUIRED (SHIPPED LOOSE)
MINIMUM OF 20% CLAMP PRESSURE MUST BE APPLIED TO UNCLAMP
AIR
B1
C1 A1
3X DRILL FOR M6 SHCS
Model No.
L5-6005-44
Pressure Range
3 - 10 MPa
28.3 61.6
G1/4 MANIFOLD MOUNT
85.8
27
Accumulator Capacity Optional In-Line Filter Cartridge
62 cm³
28.3 61.6
4.8
27
31.8
L7-0048-81
31.8
5
A5 AIR B5
L7-0842-05 (Bottom A5 & B5) or L7-0842-06 (Rear A4 & B4)
Optional Filter Plate (For Manifold Mount Filtration) 4X DRILLED FOR M6 SHCS
55.9
54
4X DRILLED FOR M6 SHCS
55.9
AIR 1/8 NPT & MANIFOLD MOUNT
4.8
For use with Operating Handle Model No. L5-6007-01 57.2 NOTE: These automatic shutoff valve decouplers and operating handle must be used with a suitable pump which includes a 4 port/3 position, P-blocked center (“A” & “B” connected to tank) directional control valve for operation of single or double acting systems. One automatic shutoff valve decoupler can be used 119.3 139.5 50.8 21 to operate only one double acting or one single acting circuit. For operation of a single acting circuit, plug the decoupler outlet port “B” (as shown in the schematic). 28.6 63.5 27 27 A2 G1/4 PORT BOTH ENDS (WITH ADAPTER)
4.8
"B1" QUICK CONNECTOR UNCLAMP AIR QUICK CONNECT
108
57.2
"B1" QUICK CONNECTOR UNCLAMP AIR QUICK CONNECT
A1" QUICK CONNECTOR CLAMP
"A1" QUICK CONNECTOR CLAMP
AIR 1/8 NPT & MANIFOLD MOUNT I-6
AIR 1/8 NPT & MANIFOLD MOUNT
139.5
G1/4 MANIFOLD MOUNT
119.3
G1/4 PORT BOTH ENDS (WITH ADAPTER)
28.3
28.3
50.8
A4
28.6
B4
A2
AIR
4
61.6
27
17.2 28.6
21
4.8
27
6
85.8
17.2 28.6
SPACER; DISCARD IF BOTTOM MANIFOLD MOUNTED. FOR FILTRATION ADD 11,4 THICK FILTER PLATE
63.5
117.3
SPACER; DISCARD IF BOTTOM MANIFOLD MOUNTED. FOR FILTRATION ADD 11,4 THICK FILTER PLATE
ILML56006 REV B
ILML56006 REV B
Two-Handed Operating Handle with Air Model No.
L5-6007-01
For use with Decoupler Model No.
"A1" CLAMP QUICK COUPLER
L5-6005-44
Features n Maximum working pressure - 10 MPa n Provides a fast, positive connection to the decoupler. n Ergonomic design reduces operator fatigue. n The Two - Handed Handle may be used with the optional Handle Docking Module to assure the hoses are disconnected from the pallet before it is shuttled into the machine.
"B1" UNCLAMP QUICK COUPLER PNEUMATIC QUICK COUPLER
243.8
G1/4
105.4
76.2
ILML56007
REV A
© Vektek February 2021
1-800-992-0236
www.vektek.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online