7 MPa Valves
In The Port Flow Control
In The Port Precision Flow Control n Flow control requires the use of manifold mount ports. n Meter-in speed control with reverse free flow check valve. n Smallest flow control valve on the market. n Prevent component cam damage from unexpected or accidental surges in flow rate. n Adjusting screw is positively retained and will not come out under pressure. n Use in the clamps port of single and double acting Swing Clamps or Link Clamps and in double acting Work Supports.
Consult the work support, the swing clamp or link clamp specifications page for the valve that is appropriate for your application. Flow control requires the use of manifold mounting.
Specifications Model No. L7-0203-71 L7-0203-74
PORT DEPTH
A MAX
E
Port Size X Depth
G 1/8 X 15.16
G 1/4 X 18.72
A B C
20.7
20.9
B HEX
14.5
14
19
11.1 15.9
11.2
ILML70201 REV E
E
21
J-2
PORT SIZE
C
13
In the Port Cavity Dimensions
J MAX
Model No.
L7-0203-71 L4-7044-3X
L7-0203-74 L4-7044-5X
OIL INLET ( 2.5 MIN)
H MIN
THREAD F
SPOT FACE
1.6
E 0.25
A B C
8.84
11.89 18.72
15.16
9.9
13.3 21.5
A 0.13 THREAD MINOR
K MAX
E F
16.5
1/8-28 BSPP 1/4-19 BSPP
G H
8.5
12.5
90
OIL OUTLET ( 2.5 MIN)
G +0.8 / -00 THREAD DEPTH
6
10
0.25 0.13
J
12.83
16.39
C 0.25 X 90
B 0.08
K
7
10
ILML70202 REV D
Note: Max flow rate not to exceed the individual device rating or 3.8 l/min whichever is lower.
Cavity works for both Sequence Valves and Flow Control Valves.
All dimensions are in millimeters.
www.vektek.com
1-800-992-0236
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online