7 MPa Accessories
First Ever
Fully Positionable and Re-adjustable G 1/4 Ported Gauges 70mm G1/4 LBM hydraulic pressure gauge. New, fully adjustable for perfect gauge orientation, G1/4 male stud connection. Install gauge any where on your fixture into any G1/4 port. Thread gauge into port, rotate into optimum orientation for easy viewing, and tighten jam nut. Re-usable O-ring seal means gauge can be removed and reinstalled. No one time use crush rings, no tapered fittings or sealing tape needed. Liquide filled analog gauge. Conforms to ANSI standard B40.1 grade B. Safety Glass window. To extend the life of pressure gauges, run you system at no more than 75% of the gauge scale.
33.3
69.3 13
33.3
69.3 13
105.8
105.8
14 SQUARE
17.5 HEX JAM NUT 19.1 HEX
14 SQUARE
17.5 HEX JAM NUT 19.1 HEX
Standard Gauge Model No.
G1/4 ADJUSTABLE STUD END PER ISO 1179-3 G1/4 A
G1/4 ADJUSTABLE STUD END PER ISO 1179-3 G1/4 A
L7-2212-00
9.1
Pressure Range (Bar)
9.1
0-100
ILML72100 REV B
ILML72100 REV B
Back Mount Gauge Model No.
A
19 HEX JAM NUT 14 SQUARE
L7-2222-00 L7-2122-00
Pressure Range (Bar)
0-100
0-100
10.0
Ø A
70 72
42.2 47.2
G1/4 ADJUSTABLE STUD END PER ISO 1179-3 G1/4 A
B
C
C
33.5
28
B
ILML72200 REV B
72.4
57.9 B.C. 43.4
Model No. L7-2000-00 For use with gauge L7-2122-00
L-2
48.3
2X M6 Capscrew Mounting Holes
Coolant Drain Both Sides
ILML720000 REV A
Subplate isolation filters to protect your valves from debris and contamination
Compact sandwich subplate design adds only 11.4 mm to the device height. Filter Plate dimensions match the mating product footprint. (See mating product catalog specifications) 25 micron filters are easily replaceable. Service kits available for easy and simple maintenance.
SHOWN WITH SEQUENCE VALVE AS AN EXAMPLE
Model No. L7-0842-01 L7-0842-02 L7-0842-03 L7-0842-05 L7-0842-06
Combination Sequence & Pressure Reducing Valve
Pallet Decoupler Bottom Mount L5-6005-40 L5-6005-41 L5-6005-42 L5-6005-43 L5-6005-44
Pressure Reducing Valve
Pallet Decoupler Rear Mount L5-6005-40 L5-6005-41 L5-6005-42 L5-6005-43 L5-6005-44
Valve Type
Sequence Valve
MANIFOLD MOUNTED FILTER PLATE WITH 25 MICRON FILTERS
11.4
Use With Model No.
L7-0818-01 L7-0512-00 L7-0412-00
FIXTURE
A MANIFOLD MOUNT O-RING INSIDE DIAMETER
A (mm)
12
12
12
18
18
ILML708403 REV A
www.vektek.com
1-800-992-0236
© Vektek February 2021
Made with FlippingBook - professional solution for displaying marketing and sales documents online