58 D
3/8” x 1/2” TRANSMISSION OIL COOLER LINE SCISSORS
TRANSMISSION OIL COOLER LINE REMOVER SET • Use 3/8” size for 2000 and later Ford V8 Explorer, ‘04 and later Ford F150 and Cadillac CS • Use 1/2” size for Ford Super-Duty trucks F250, F350 and F450 • Patent pending
PIPE STRETCHER KIT Collet sets expand pipes from 1-5/8” to 4-1/4”. Comes in a molded storage case. Expands all types of exhaust pipe, including stainless steel, from 1-5/8” to 4-1/4” in size.
FREE FENDER COVER
Use 3/8’’ size for 2003 - 2010 Ford V8 Explorer, 2004 - 2008 Ford F150, 2004 and later Cadillac CS. Use 1/2’’ size for Ford Super Duty Trucks, F250, F350 and F450.
$35.00 VALUE LIS-89880 LIS-17350.........................................................................................$291.59
3-PC. TAILPIPE EXPANDER SET • Small Expander: 1-1/8” to 1-3/4” • (3) Spare sets of rubber O-rings • Medium Expander: 1-1/2” to 2-1/2” • Blow molded storage case • Large Expander: 2-1/8” to 3-1/2”
LIS-39660.................................... $11.39 LIS-39960...................................... $8.39
38410
37160
ATD-5723................................................................$63.29
35800
EXHAUST PIPE CUTTER PLIERS • Cuts pipe from 3/4” to 3-1/4” (19mm to 83mm) in diameter • Warranty does not cover normal dulling of cutting wheels from repeated use - replacement cutting chain PRT5721-01 available for purchase
39120
39100
ATD-5721.......................................................$44.59
39480
3399
5 TON STRAIGHT PULLER • Includes: 9” bar and (3) pairs of puller arms • Puller arms slide back and forth on yoke to adjust
39850
DISCONNECT TOOLS & SETS Number Description/Contents
Price
ATD-3047. .....................................................$60.29
Master Disconnect Set - A set of the most popular disconnect tools. Includes fuel line quick connect and spring lock couplings, air conditioning line couplings, and transmission oil cooler connectors. 15-Pc. Deluxe Disconnect Tool Set - Set includes tools for use on 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”: fuel lines and filter; fuel pressure regulators; fuel return lines; A/C fittings; oil cooler lines; radiator cooler lines; trans. oil cooler lines & vehicle specific applications.
LIS-39850
$197.29
ATD-3048 10 Ton Straight Puller (Includes: 10” bar and (4) pairs of puller arms) ........................... $199.49
• Jaws are reversible to make four other pullers • 8-way, 2- or 3-jaw reversible pullers REVERSIBLE JAW PULLER
ATD-3399
$51.59
• Ideal for pulling smaller gears, bearings, pulleys and other press fit parts • Max Reach: 5-1/2”; Max Spread: 7”; Max Screw Size: 9/16”-20 x 6-15/16” ATD-3044. ..............................................$70.29
LIS-37000
$9.39
6-Pc. A/C Fuel Line Disconnect Set - 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8”
LIS-37160
$23.99
Disconnect Pliers - Low profile with 85˚ bend. Works on Delphi two tab connectors and some import vehicles 6-Pc. Aluminum Disconnect Set - Disconnects work on air conditioning lines and quick connect fuel lines 13-Pc. Aluminum Spring Disconnect Set - Spring-loaded construction allows one-handed access to hard-to- reach, confined, and obstructed areas. Tools are marked for easy identification. Blow-molded case for storage. Low Profile Fuel Line Disconnect For Ford, 5/16” & 3/8”- Works on 5/16” & 3/8” fuel lines found in 2010 and newer Ford vehicles with 1.6L, 2.0L & 3.5 GTDI, and 6.2L Boss engines. Double ended tool is designed to fit the limited clearance between the fuel line and high pressure fuel pump. Made from durable, flexible acetal. 2-Pc. Ford Oil Cooler Spring Disconnect - Spring-loaded construction allows one-handed access to hard-to- reach, confined, and obstructed areas. Tools are marked for easy identification. Blow-molded case for storage. Def & Fuel Line Disconnect Set - Low profile compact design allows easy access to hard-to reach DEF, breather line, coolant line, and fuel line connectors found on most cars, truck and heavy-duty vehicles. Kit comes with six sizes. Four sizes are used to compress connectors and two are used to spread connectors to remove the line.
• 2” and 3” bearing separators • (4) sets hex push-puller legs • 5” puller cross bar with 6-1/4” forcing screw 5 TON BAR-TYPE PULLER/BEARING SEPARATOR SET
LIS-35800
$89.99
$148.29
LIS-39480
$10.59
LIS-39120
ATD-3056. ........................................... $112.59
HARMONIC BALANCER INSTALLER KIT Set includes driving screw, thrust bearing and 13 threaded adapters necessary to work on a wide range of domestic and some import
HARMONIC BALANCER PULLER SET This kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevy Camaro and Dodge 5.7L Hemi.
$31.89
LIS-39100
$33.39
LIS-38410
For more information, visit... POWERTEAM.COM
harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3.5L and 4.0L.
POSI LOCK MANUAL PULLERS
106
Ease of use is a priority when using any puller. With Posi Lock manual pullers, opening, closing, locking, and aligning the jaws happen simultaneously when you turn the T-handle.
Model
Capacity 2 Tons 5 Tons 10 Tons 17 Tons 20 Tons
Jaws
Reach
Spread
Price
MTI-103 MTI-104 MTI-106 MTI-108 MTI-110
$147.49 $227.39 $299.95 $382.69 $419.95
3 3 3 3 3
3” 4” 6” 8”
.25 to 4.5”
LIS-53790.......................... $214.39 LIS-54810.......................... $257.29
.5 to 5” .5 to 7”
LATE MODEL HARMONIC DAMPENER PULLER & HOLDING TOOL SET • 3-jaw puller with 3/4” hex for wrench or socket use
.75 to 12”
9.67”
1 to 15”
Transmission bearing removal takes minutes, not hours when using PTTJ-1 or PTTJ-2 pullers. Specially machined jaws that clamp in snap-ring grooves as narrow as .070” (1.8mm) TRANSMISSION BEARING PULLERS
• (4) lengths of forcing rods • Forcing screw with 3/8” square drive for ratchet use • Chrysler harmonic balancer holding tool
19MM HARMONIC BALANCER SOCKET FOR HONDA Use on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. 1/2” drive.
Model
Jaw Width
Jaws
Reach 9.25” 5.25”
Spread
Price
MTI-PTTJ1 MTI-PTTJ2
$332.89 $289.99
1”
2 3
2.75 to 14.75”
.75”
1 to 6.75”
PTTJ-1
NO SLIP PULLEY PULLER AND INSTALLER SET • Removes and installs pressed on power steering, alternator and air pump pulleys without slipping • Fits most domestic models including GM 3.1 and Quad 4 engines • Works on traditional V shaped pulleys and serpentine belt system pulley
ATD-3039........................... $147.29 LIS-77080............................ $34.29
HARMONIC BALANCER PULLER SET • Heavy-duty, flange-type puller easily pulls harmonic balancers,
LIS-39000........................................................$80.59
ALTERNATOR/POWER STEERING PULLEY PULLER & INSTALLER • Removes pressed-on alternator and power steering pulleys on late model GM (including Quad 4), Ford and Chrysler engines as well as some AMC vehicles
timing gears and other parts with bolt circle diameters from 1-1/2” to 4-5/8” • Works on most cars - large and small, foreign and domestic • Will pull parts with tapped holes like flywheels, gears and pulleys
RATCHETING HARMONIC BALANCER PULLER • Eliminates the need to remove major engine components • Ratcheting function holds jaws in place during application • Ratcheting yoke has a 7-ton pulling capacity
• Reverse the jaws to pull the alternator internal bearing • Will not work on 3.3L and 3.5L Chrysler engines
ATD-3041............................. $44.99 ATD-3075............................. $95.99
ATD-3052......................................................................... $63.19
Made with FlippingBook flipbook maker