60 D
WATER PUMP SPROCKET HOLDER - ECOTEC
10-PC. FLARE NUT SOCKET SET Works on ABS, master cylinder, coolant, and diesel injection sensors. 3/8” square drive with chrome finish. Set includes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm
COMPACT WRENCHES FOR DAVCO AND PACCAR High strength laser-cut steel for durability
61180 61190
61380
IPR SOCKET FOR FORD 6.0L AND INTERNATIONAL DIESEL LIS-13800....................... $40.29 Slot in tool has been modified to fit larger connectors on injector pressure regulators found on International diesels. Use with 3/8” square drive . Securely holds water pump sprocket preventing loss of timing or damage to the engine. Special half-moon design allows easier access to water pump gear bolts.
Number
Size
Applications
Price
Any diesel engine found in Caterpillar CT660, CT11, CT13, CT15, Cummins, Detroit Diesel, International, Mercedes Benz, Paccar, Daimler Trucks North Ameri- ca, Kenworth, Mack, Navistar, Peterbilt, Thomas Built Buses and Volvo. Detroit Diesel DD13, DD15 and DD16 engines found in Paccar, Daimler Trucks North America and Volvo. 3/8” Square drive. Works on fuel filters found on Ken- worth, Peterbilt and Cummins diesels.
LIS-61180
$34.29
6”
LIS-12030.................................................... $174.69
LIS-61190
$38.59
8”
OXYGEN SENSOR WRENCH • 6 and 12 point with flex head • Works on all oxygen sensors with 7/8” hex
LIS-61380
$23.89
–
12 pt.
6 pt.
LIS-68210.................................. $29.19
SHOCKIT ™ SOCKET DIESEL NOX & PARTICULATE SENSOR REMOVAL KIT
FUEL TANK LOCK RING KIT Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4” to 7-1/4” and keeps the drive centered. Works on the smaller GM serrated rings and traditional rings. LIS-22100....................... $47.19 FLYWHEEL LOCKING TOOL FOR 6.6L DURAMAX Works on 6.6L Duramax engines with Allison automatic transmissions. Saves time by locking the flywheel at the transmission.
ATD-5665. ..................................................... $39.29
Remove even the most stubborn diesel exhaust sensors with the Shockit™ Socket Diesel NOx and Particulate Sensor Removal Kit.
11-PC. OXYGEN SENSOR AND SENDING UNIT SOCKET SET • For removal and installation of oxygen sensors, oil pressure sending units and vacuum switches • Includes a variety of socket & wrenches for use on most domestic and imported vehicles • For use with 3/8” and 1/2” drive ratchets
LOC-LT996D................................................. $349.95
SHOCKIT ™ O2 SENSOR REMOVAL KIT WITH HD EVA FOAM TRAY
The Shockit™ O2 Sensor Removal Kit, powered by an air hammer, effortlessly removes frozen or obstructed O2 sensors
ATD-5666. ................................................... $107.29
FORD DIESEL FUEL FILTER WRENCH • The low-profile, 3/8” drive Ford fuel filter wrench allows mechanics to access those tough fuel filters in tight quarters • Used for removal and installation on the Ford Power Stroke® diesel and International/Navistar diesel engines
LOC-LT994FM.............................................. $186.59
LIS-62970..................... $66.89
11-PC. GASKET HOLE PUNCH SET • (10) punch sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”, 7/8”, 1”, and long driving mandrel
UNIVERSAL CAMSHAFT BEARING TOOL Includes: Driving shaft, driving shaft extension, expander unit, (5) split driving plugs, (2) driving collars, centering cone and molded case.
ATD-5405. ..................................................... $15.79
CHRYSLER CAM PHASER MASTER SET VVT & VVL Includes: 2 camshaft phaser holders, 5 timing chain holders & L-pin Applications: 2011-2022 Chrysler, Dodge & Jeep models KAS-950........................................................ $51.49
LIS-18000................................................... $261.59
VARIABLE PIN SPANNER WRENCH Accommodates the most common metric size pin configurations including: 3.5mm, 4mm, 4.5mm, 5mm, 6mm, 7mm and 10mm
VENT CAP WRENCH FOR DAVCO Double-ended wrench
removes vent cap on top of Davco chassis mounted fuel filter system canisters
CCT-5001..................................................... $399.95
ATD-8614. ..................................................... $98.49
LIS-61070..................................................... $13.99
FAN CLUTCH WRENCHES
Includes: 7/8”, 32mm, 36mm, 40mm thin, 47mm, 1-7/8”, 2”, new 52mm, and 2-1/8” driving wrenches; handle assembly; molded case. Wrenches fit FORD, GM, VW, BMW, International and Chrysler, newer Duramax and International. Use with air hammer. Removes and installs the fan clutch on many models when re- pairing or replacing water pump, timing chain, or the fan clutch. Includes: Universal Pully Holder with pin set (5x8mm); 22mm, 36mm, 36mm, 40mm and 47mm Fan Clutch Wrenches. Includes: Universal Pully Holder with pin set (5x8mm); 36mm fan clutch wrench. Square drive cut-outs designed for use with a breaker bar for added torque or length. Accommodates the 6 most commonly used wrench sizes: 22mm, 32mm, 36mm, 40mm, 48mm and 50mm.
• 50mm • 36mm • 48mm • 32mm • 40mm • 22mm
3406
10-Pc. Pneumatic Fan Clutch Wrench Set
LIS-43350
$199.95
Fan Clutch Wrench Service Kit
KAS-41570
$157.49
Fan Clutch Wrench Set
43350
KAS-3472
$69.29
6-in-1 Fan Clutch Wrench
KAS-3406
$40.89
41570
3472
SERPENTINE BELT TOOLS
Ratcheting Serpentine Belt Tool
Removes and installs belts on systems using the spring-loaded idler pulley. Includes: 13–19mm sockets; 3/8” and 1/2” square drives, handle assembly, extension and case. Includes: 3/8” and 1/2” square drives, 13, 14, 15, 16, 18 and 19mm sockets, extension, handle and socket set with holder. Everything you need for complete Serpentine Belt Tool vehicle coverage. Includes: long bar; three Pass-Thru® design adapters (3/8”, 1/2” and 3/4”); seven Pass-Thru® design 6-point sockets (13 – 19mm); three crowsfoot (13, 14, 15mm) and storage case. Unique magnetic faces hold the tool in place on the pulley, helping prevent damage to belt or pulley during removal or installation. Compact, one-piece tool can be used on the front or back side of the pulley. Double sided design allows the tool to work on both A/C and main drive pulleys when installing stretch belts on GM 5.3L, 6.2L, and 6.6L gas engines. The long tab is used on the A/C belt found on 2014 and newer GM trucks. The short tab can be used on the main drive belt found on 2019 and newer GM. Heat treated steel provides added strength. Black oxide finish. Used to Install the Main Stretch Belt on Extra Deep Double Pulleys. The tool holds the belt on the pulley as the engine in rotated clockwise to install the belt. Helps prevent damage to the belt or pulley during installation. Works on 2011 and newer Ford 3.5L EcoBoost and 3.7L engines, as well as 2019 and newer GM 5.3L and 6.2L engine main drive belt.
LIS-59650
$107.19
89000
LIS-59800
$69.95
Serpentine Belt Tool
15 Pc. Serpentine Belt Tool Set with Locking Flex Head Ratcheting Wrench
KDT-89000
$111.29
59370
Stretch Belt Remover/ Installer
LIS-59370
$23.59
59800
LIS-59560
$16.69
Stretch Belt Tool For GM
59560
59650
Stretch Belt Tool For Ford 3.5l & 3.7l
LIS-59350
$34.49
59350
Made with FlippingBook flipbook maker