61 D
CIRCUIT TESTERS
Settable to 4 and 5 pin relay. Three diagnostic trouble codes. #192 includes the Relay Buddy and a zippered case. #193 includes (5) relay adapters, (3) adapters for testing shielded relays and (2) adapt- ers for testing new relay types commonly used on fuel pumps and other powered de- vices. It applies a 7+ amp load to the relay and looks for excessive voltage drop. Test results are displayed by the green, yellow or red LED. #195 can test 10 different 12V relays. Includes three adapters for shielded relays. Large backlit LCD display for visible voltage readings. Checks electrical circuits on all 3–48 volt vehicle systems. Impedance Rating: 200–4000 Ohms. 12 ft. coiled test lead. Ready for use in the new generation of vehicles with mixed or single 24V systems. Inter- nally protected against power surges and overloads. 8” flexible probe reaches wires in congested places. LEDs show open or short circuit conditions. Trace wires inside bindles, conduits, behind panels, under carpets, upholstery, etc. Tests 6 and 12V systems. Locates shorts, open circuits and grounds. Use with ignition on. Clip to ground anywhere on vehicle and use probe to make contact with wire or cable being tested. Bulb indicates condition of circuit. Tests circuits from 3 to 28 Volts DC. LED light and buzzer indicator. Does not require a ground wire or clip. Safe for work on automotive computers, ECMs, airbags, etc. Special V-tip allows safe piercing and can be removed to test hard-to-reach places. Operates on replaceable long-life “N” or “LR-1” size alkaline batteries (included). Easily checks 6 and 12V systems. 5 ft. heavy-duty lead. Tough plastic handle lights up if circuit is good. Lead remains flexible in low temperatures. New coil cord design for ease of use. Acetate handle, coiled lead wire. Easily checks 6 and 12V systems. New full size comfortable acetate handle lights up when circuit is good. Leads remain flexible in low temperatures. Ground lead stretches up to 10 ft. Heavy-duty circuit tester for checking low voltage up to 12 volts. By depressing the red button the tester becomes a jumper for powering electrical components or a ground. The probe, handle, cord and clamp are reinforced for durability. Comes with a strain relief spring on the cord. 3–30V detection range of DC voltage. Bi-directional polarity testing: Power and Ground. Dual color LED indicates red for power and green for ground on 6V, 12V and 24V systems. Compact size for use in tight access areas. Computer safe. For use on auto- motive, commercial vehicle and equipment repair. For use on 12V & 42V Hybrid systems. Automatic Voltage Identification: BLUE LED for 12V and RED LED for 42V. Pointed probe tests through wire insulation. Computer and airbag safe. 12 ft. heat and oil resistant coiled cord.
ESI-192
$91.09
Relay Buddy® 12/24 (Tester only)
195
ESI-193
$198.69
Relay Buddy® Pro Test Kit
309A
193
ESI-195
$221.95
Super Relay Buddy® Pro Test Kit
60150
3–48 Volt LCD Wide Range Digital Circuit Tester
ATD-55045
$36.59
192
32900
FaultFinder Short/Open Circuit Finder & Circuit Tracer
MTI-FF310
$196.69
Primary Circuit Tester with Ground Clip
ATD-5500
$10.99
5513
FF310
Cordless Professional Circuit Tester 3–28V
ATD-5503
$21.69
5503
55033
ATD-5513
$14.99
Heavy-Duty Circuit Tester
Heavy-Duty Circuit Tester with Coiled Lead Wire
ATD-5624
$16.29
55042
LIS-32900
$24.69
Heavy-Duty Circuit Tester/Jumper
Heavy-Duty Cordless Circuit Tester 3–30V
ATD-55033
$50.39
5624
55045
5500
ATD-55042
$26.79
12–42V Hybrid Circuit Tester
FUEL SYSTEM TESTING
MASTER GLOBAL FUEL INJECTION PRESSURE TEST KIT
MASTER FUEL INJECTION PRESSURE TEST KIT • Tests most fuel injection systems both foreign and domestic • Features (2) gauges with gauge protectors for accurate testing from 5-150 psi • Includes late model GM, Chrysler, Mitsubishi and European applications
PRESSURIZED INDUCTION TOOL KIT • Can be used to clean induction system through the air intake or through a vacuum line • Tool comes complete with S-tool and vacuum line attachment • Easy to read gauge for accurate pressure settings • Sight glass allows the Technician to monitor chemical level – no guessing when the service is complete • Schrader valve on gauge assembly allows for simple, safe depressuriza- tion of the system when the service is complete
• Covers all major model vehicle platforms, domestic and foreign, 1988 to present (does not include CIS/TBI) • Test gauge assembly disconnects from test hose and valve assembly for easier storage and improved gauge protection
MOV-200-1145....................................Call For Price ATD-5578...................................................... $527.59 ATD-5650...................................................... $423.69
NOID LIGHT SET • Includes (10) noid lights plus 4 ft. extension for easy viewing • Quickly and easily tests electronic fuel njection systems on: GM TBI; GM ‘87 - present; GM ‘82-’91; Bosch PFI; Ford TBI; GM PFI; Geo TBI; GM SCPI
DELUXE VACUUM/FUEL PUMP TEST KIT • Complete with 2 ft. of high quality hose, plus (3) fittings to test domestic and foreign cars and trucks with gasoline engines • 3-1/2” compound gauge has a multicolor dual scale
FUEL INJECTION CANISTER CLEANER • Two gauges enable a Technician to check the vehicle fuel pressure with the right side gauge, and then easily set cleaning pressure with the left side gauge by referring to vehicle fuel pressure on the right side gauge. • Cleans carbon from intake valves, injectors, and combus- tion chambers with a professional carbon cleaning solu- tion, which will restore the original spray pattern more effectively, giving improved performance, fuel economy, and emission tests.
dial with ranges from 0-10 psi, 0-0.7kg/cm2 pressure and 0-28inHg/0-70cmHg vacuum • Hook-on gauge enables technician to hang gauge and hose assembly to free his hands
ATD-5612........................................................ $55.69
BASIC FUEL INJECTION PRESSURE TESTER
ATD-5657........................................................ $38.89 MTI-TU470B................................................. $273.59
Tests most systems except Bosch CIS and GM TBI; 2-1/2” dual scale gauge reads 0–100 psi or 0–7 BAR; includes the nec- essary adapters, banjo bolts, and 16” gauge hose with quick coupler and adapter guide book
FUEL INJECTION PRESSURE TESTER WITH SCHRADER ADAPTERS • Enables testing on all cars with standard or small Schrader valves
3 WAY EXHAUST BACK PRESSURE KIT • Allows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc • The 2-1/4” special gauge has two multicolored bands for measuring at Idle and 2500 RPM. The scale ranges are in PSI and bar. Boot included on gauge for extra protection • Can test in THREE different places: Oxygen Sensor, Exhaust Pipes, and Air Injection System
FUEL INJECTION PRESSURE TESTER Includes everything needed to test the following ATD-5633...........................$189.95
• The 3-1/2” gauge (with hook for hands free use) has a dual scale dial with ranges from 0-100 PSI and 0-7 bar • Quick Coupler connection at end of gauge hose (other QC adapters can be purchased as needed)
systems: American Motors, Bosch AFC, MPC European and Japanese (except CIS), Chrysler, Ford, GM (except TBI), Japanese fuel injection systems and other Bendix-type fuel injection systems, Schrader-type valve
MTI-TU469.................................................... $148.59 MTI-TU24APB............................................... $132.79
ATD-5567................... $59.95
Made with FlippingBook flipbook maker