Air Floation Tables Machine has three pneumatic floation tables mounted at the operator’s side of the machine. The operator can easily move several hundred pounds of material. Air tables are adjustable right and left depending on materials to be processed. Panel Clamps Single panels or multiple sheets up to 120 MM in thickness can be processed simultaneously. Sheets are moved through the machine via servo motor, rack and pinion, and double finger panel grippers with nylon coating to prevent scratching. A B
The heavy steel pressure beam, table top , and base frames of the machine are constructed as single structure weldments from plate steel, up to 1” in thickness. Machine control features an easy to understand graphical user interface. Programming can be done at the machine or remotely in the office using popular optimization softwares. The saw carriage is positioned by servo motors, allowing for the most accurate cuts. It has a main saw with 20 HP, scoring saw with 2 HP, and integrated dust collection ports.
Side Aligner
C
Blades & Dust Collection The main saw blade is 450 MM in diameter, and the scoring saw blade is 200 MM in diamter. Adjustments to the scoring blade for raise/lower and side motion are easily accomplished. The dust collection ports are 6 inches in diameter x2, with flow rate of 4,000 feet per minute required. Positioning Speed The main saw blade travels at 90 meters per minute with saw retract at 120 meters per minute. The panel pusher travels at 85 meters per minute or 278 feet per minute. D Machine alignment device which automatically deploys on all crosscuts. Programing determines the position of the side alignment fence during each cycle. features a side E
40
Made with FlippingBook Ebook Creator