THE WARMTH OF WOOD. ENGINEERED IN ALUMINUM.
Contents
Project Inspiration What Sets Fortina Apart Quick Ship Special Order Finishes
04 33 34 36 36 38 39 40 42 42 44 45 46 47 50 51 52 52 55
Interior Exterior Battens vs Slats
Batten Applications Overview Special Order Battens and Slats Batten Profiles Decorative Backrails Stringer Batten Profiles Stringer Accessories Direct Attach Batten Profiles Slat Profiles Slat Accessories Enhancements LightStrip Terms and Conditions
Fortina TM is an architectural system that replicates the look and feel of wood slats and battens using aluminum wrapped in a hyper-realistic, non-PVC surface. The result is a lightweight, durable solution suited for a variety of applications. With a wide range of finishes that closely resemble natural wood, Fortina enhances interior and exterior environments while offering lower cost, reduced waste, easier installation, and greater color consistency than real wood. Material + Performance
Fortina provided a durable solution suitable for our climate to extend the look of the exposed wood roof deck at the interior to the exterior. Landon Burg Architect
Cover: Avalon Bay / Emeryville, CA
Starbucks / Quebec, Canada
Kauppakeskus Plaza / Helsinki, Finland
The Griffin Club / Los Angeles, CA
8
Tetra Hotel / Sunnyvale, CA
Mudd Library, Northwestern University / Milpitas, CA
The Griffin Club / Los Angeles, CA
17
16
18
Tetra Hotel / Sunnyvale, CA
21
20
BNIND.COM
201 King of Prussia / Radnor, PA
23
22
Marion Fire Station / Marion, IA
24
Origami Offices, Architect: LNAI / San Mateo, CA
Fortune 500 Tech Company
TD Bank / Ontario, Canada
31
30
What Sets Fortina Apart
Benefits
Performance you can see and durability you can rely on.
Authentic Wood Look Captures the warmth and grain of real wood without the cracking or warping of natural lumber.
Class A Fire Rated Meets ASTM E84 Class A performance standards for all applications.
Low Maintenance Easy to clean with a durable, scratch-resistant surface designed for everyday use.
Lightweight & Stable Aluminum construction reduces structural load and resists movement over time.
Consistent Finish Manufactured for uniform color and controlled grain across large installations.
Weather Resistant Withstands sun exposure, moisture, and changing climates while maintaining quality.
Multi-Layer Film Technology An engineered surface system bonded to anodized aluminum for lasting color, durability, and wood realism.
Protective Top Coat Shields against UV exposure, moisture, and surface wear. Clear Performance Film Adds depth while protecting the printed surface from fading. High-Definition Print Layer Reproduces natural wood grain with realistic variation and detail.
Anodized Aluminum Enhances corrosion resistance and bonding performance.
7 For All Mankind / Irvine, CA
33
Quick Ship
Finishes
Wood Grain
Fortina. On an Accelerated Timeline.
TAR-758 Vent Walnut N
TAR-005 Rican Oak
TAR-647 Earl Walnut M
TAR-532 Cherry Line M
TAR-021 Criollo Elm
Fortina’s Quick Ship program offers a curated selection of Fortina’s most specified profiles and finishes, rated for both interior and exterior applications—available on an accelerated timeline. Available in select wood- inspired finishes and anodized aluminum options, Quick Ship delivers the same Fortina system without extended lead times. Square corner keys—available for select THS Quick Ship profiles * —allow battens to be miter-cut and joined at 90°, creating a refined corner detail. Manufactured and assembled in the United States, Quick Ship orders ship within 72 hours—keeping projects on track without compromising design intent.
TAR-004 Rokko Cedar
TAR-2035 Axis Oak N
TAR-2122 Lunta Elm
TAR-028 Pacific Gray
TAR-775 Carina Elm D
Anodized
AB1010 Silver
AB1020 Champagne
AB1100 Light Gold
AA1090 Rose Gold
AB1030 Golden Bronze
AB1040 Light Bronze
AB1060 Dark Bronze
AB1070 Deep Bronze
AB1050 Medium Bronze
AB1080 Black
Profiles
THS-3010* 1" x 4" 30mm x 100mm
TLKS-5050 + CLKU-50 2" x 2" 50mm x 50mm
THS-5010 2" x 4" 50mm x 100mm
THS-5015 2" x 6" 50mm x 150mm
THS-50250* 2" x 10" 50mm x 250mm
Mitered Joints
End Caps
Bracketed Used on: THS 3010, 5010, and 5015 Battens Material: Steel Finish: Powder coat, anodized, or wood grain
Screw-On Used on: TLKS (Direct-Attach) Battens Material: Aluminum Finish: Powder coat, anodized, or wood grain
Scan to learn more about our Quick Ship Program.
Mitered batten with corner key
Corner key connection detail
35
34
All finishes shown are available by special order. For current lead times and minimum order quantities, please contact your Fortina representative. Special Order Finishes | Interior
Wood Grain
Wood Grain
TE-SN2122 Lunta Elm WG
TE-SN2107 Farine Ash W
TE-SN2015 Crema Chestnut CW
TE-SN2108 Nuage Chestnut W
TE-SN2063 Brilas Wood W
TE-SN2125 Petra Ash M
TE-SN2120 Dusk Walnut M
TE-SN2061 Tendre Walnut MG
TE-SN2092 Agile Walnut M
TE-SN2102 Flag Teak M
TE-SN2065 Sklira Ash W
TE-SN2080 Marble Wood W
TE-SN947 Madras Walnut W
TE-SN2117 Bonamana Ash WG
TE-SN2113 Ravin Oak N
TE-SN2056 Revlon Wall M
TE-SN2089 Thermos Oak D
TE-SN2097 Stella Elm BL
TE-SN902 Bliss Walnut B
TE-SN2064 Brilas Wood DG
TE-SN2084 Brook Willow W
TE-SN2114 Chrome Ash WG
TE-SN2025 Maquillage Elm TG
TE-SN2073 Pulito Oak N
TE-SN2124 Nocturne Walnut G
TE-SN2059 Legacy Ash DG
TE-SN2057 Revlon Wall B
TE-SN2068 Lindo Acacia LB
TE-SN2067 Lindo Acacia M
TE-SN2103 Ars Cherry M
TE-SN2087 Thermos Oak LG
TE-SN2123 Limber Oak N
TE-SN2055 Revlon Wall W
TE-SN2074 Pulito Oak L
TE-SN2118 Elg Oak N
TE-SN2051 Symphony Walnut D
TE-SN948 Madras Walnut DG
TE-SN2050 Symphony Walnut B
TE-SN2081 Marble Wood DG
TE-SN2106 Plage Tineo B
TE-SN2035 Axis Oak N
TE-SN882 Norte Oak L
TE-SN2053 Frettare Oak N
TE-SN2058 Legacy Ash G
TE-SN2060 Tendre Walnut LG
TE-SN2070 Lindo Acacia BL
TE-SN2040 English Walnut BL
TE-SN2062 Noir Imbuia D
TE-SN2112 Nouvelle Castillo D
TE-SN2111 Nouvelle Castillo G
Non-Wood Grain
TE-SN7003 Pure Mist
TE-SN7001 Pure Gray
TE-SN7100 Reflet Cloth W
TE-SN7101 Reflet Cloth G
TE-SN7002 Pure Black
TE-SN2109 Nuage Chestnuts BG
TE-SN2115 Fresco Teak BG
TE-SN2095 Saloon Eucalyptus G
TE-SN2119 Tinta Oak G
TE-SN2066 Sklira Ash G
TE-SN7105 Mode Metal W
TE-SN7108 Mode Metal BG
TE-SN7102 Mode Metal LG
TE-SN7103 Mode Metal B
TE-SN7104 Mode Metal BL
TE-SN2099 Humming Elm G
TE-SN2100 Diera Oak N
TE-SN2104 Sieg Birch N
TE-SN2039 English Walnut G
TE-SN2069 Lindo Acacia G
TE-SN7106 Minerva Stucco W
TE-SN7107 Minerva Stucco DG
TE-SN7109 Coco Sand LG
TE-SN7110 Belladonna Marble G
TE-SN883 Norte Oak G
TE-SN2110 Rivier Ash M
TE-SN2121 Savor Bokote DB
TE-SN2116 Fresco Teak G
TE-SN2091 Allegro Cherry G
Please note that the color in the brochure may vary from the actual product.
37
36
All finishes shown are available by special order. For current lead times and minimum order quantities, please contact your Fortina representative. Special Order Finishes | Exterior
Battens vs Slats
Wood Grain
TAR-012 Bamboo
TAR-005 Rican Oak
TAR-758 Vent Walnut N
TAR-004 Rokko Cedar
TAR-2035 Axis Oak
TAR-647 Earl Walnut M
TAR-030 Machilus
TAR-532 Cherry Line M
TAR-021 Criollo Elm
TAR-602 Vintage Walnut
Battens A batten is an individual linear element installed with space between each profile. Traditionally used to create shade and ventilation, battens are now widely used as architectural features on walls and ceilings. The spacing between battens creates depth, shadow lines, and visual rhythm.
Fortina Battens are aluminum extrusions wrapped in a non-PVC film, available in a wide range of profiles and finishes for interior and exterior applications.
TAR-775 Carina Elm D
TAR-028 Pacific Gray
TAR-605 Blossom Birch
TAR-808 Vent Walnut BL
TAR-760 Vent Walnut D
TAR-014 Antique Cedar RB
TAR-013 Antique Cedar G
Non-Wood Grain
TAR-001 Terra Cotta Clay
TAR-002 Terra Cotta Arrosto
TQ-093* Win White
Anodized
RB-2N Dark Bronze
SN Silver
RB-5N Stain
RB-4N Light Bronze
RB-3N Bronze
Slats A slat is a linear profile designed to interlock or install continuously, creating a more uniform surface. Unlike battens, slats minimize spacing and produce a tighter, more consistent appearance.
NS-SN Silver Matte
NS-5N Stain Matte
NS-4N Light Bronze Matte
RB-1N Black
NS-3N Bronze Matte
Fortina Slats are lightweight aluminum profiles available in multiple widths and reveal options, finished to coordinate seamlessly with Fortina Battens.
NS-2N Dark Bronze Matte
NS-1N Black Matte
*Semi-Exterior Please note that the color in the brochure may vary from the actual product.
39
38
Batten Applications Overview
Interior Applications
Exterior Applications
Vertical On Wall
Horizontal On Wall
Ceiling
Vertical On Wall
Horizontal On Wall
Direct Attachment with interlocking batten and back rail. Screw back rails at desired locations vertically to the wall and lock batten into it. It is recommended that you secure the back rail with small screw on side at top and bottom.
Direct Attachment with interlocking batten and back rail. Screw back rails at desired locations horizontally into the wall and lock Batten into it. It is recommended that you secure the back rail with small screw on side at top and bottom.
Direct Attachment with interlocking Batten and back rail. Screw back rails at desired locations into the ceiling and lock Batten into it. It is recommended that you secure the back rail with small screw on side at each end.
Stringer Mounted battens attach horizontally to the wall structure with L-brackets, Unistrut, L-angles or similar. Stringers will be pre-notched to create the desired Batten spacing. Battens are secured to the stringers with special Fortina clips.
Stringer Mounted battens attach vertically to the wall structure with L-brackets, Unistrut, L-angles or similar. Stringers will be pre-notched to create the desired Batten spacing. Battens are secured to the stringers with special Fortina clips.
Stringer Mounted battens attach horizontally stringers, which are attached to the wall structure with L-brackets, Unistrut, L-angles or similar. Stringers will be pre-notched to create the desired Batten spacing. Battens are secured to the stringers with special Fortina clips.
Stringer Mounted battens attach vertically to stringers, which are attached to the wall structure with L-brackets, Unistrut, L-angles or similar. Stringers will be pre-notched to create the desired Batten spacing. Battens are secured to the stringers with special Fortina clips.
Stringer Mounted battens attach horizontally to stringers, which are supported from the ceiling structure with rods, Unistrut or L-brackets. Stringers will be pre-notched to create the desired batten spacing. Battens are secured to the stringers with special Fortina clips.
Floor-to-Ceiling
Floor-to-Ceiling battens use end plates to support vertically oriented arrays of decorative aluminum battens, creating continuous floor-to-ceiling screens. This solution is ideal for tight clearance conditions, such as in front of glazing, where access to the back of the batten is limited. Battens are individually secured at the floor and ceiling with attachment brackets.
Scan to access Fortina Technical documents.
41
40
Available for All Batten Applications Special Order | Battens
Square 15
Square 40
TLBS-1550 ½" x 2" 15mm x 50mm
TLBS-1510 ½" x 4" 15mm x 100mm
TLBS-1515 ½" x 6" 15mm x 150mm
THS-4040 1 ½" x 1 ½" 40mm x 40mm
THS-4050 1 ½" x 2" 40mm x 50mm
THS-4080 1 ½" x 3 ¼" 40mm x 80mm
THS-4010 1 ½" x 4" 40mm x 100mm
Square 20
Square 50
THS-2040 ¾" x 1 ½" 20mm x 40mm
THS-2060 ¾" x 2 ¼" 20mm x 60mm
THS-2080 ¾" x 3 ¼" 20mm x 80mm
THSN-5050 2" x 2" 50mm x 50mm
THSN-5060 2" x 2 ¼" 50mm x 60mm
THSN-5010 2" x 4" 50mm x 100mm
THSN-50125 2" x 5" 50mm x 125mm
THS-2010 ¾" x 4" 20mm x 100mm
THS-2015 ¾" x 6" 20mm x 150mm
Square 25
THS-5015 2" x 6" 50mm x 150mm
TPS-50200 2" x 8" 50mm x 200mm
THS-2570 1" x 2 ¾" 25mm x 70mm
THS-2580 1" x 3 ¼" 25mm x 80mm
TPS-50250 2" x 10" 50mm x 250mm
Square 30
THSN-3030 1 ¼" x 1 ¼" 30mm x 30mm
THS-3050 1 ¼" x 2" 30mm x 50mm
THS-3060 1 ¼" x 2 ¼" 30mm x 60mm
TPS-50300 2" x 11 ¾" 50mm x 300mm
THS-3075 1 ¼" x 3" 30mm x 75mm
THS-3080 1 ¼" x 3 ¼" 30mm x 80mm
THS-3010 1 ¼" x 4" 30mm x 100mm
THS-3015 1 ¼" x 6" 30mm x 150mm
Imperial measurements are rounded to the nearest ¼".
43
42
Interior, Exterior Wall, and Ceiling Applications with Stringers Special Order | Decorative Backrails
Special Order | Stringer Battens Interior, Exterior Wall, and Ceiling Applications with Stringers
Backrails
Square 60
Square 75
Square 100
THBM-20 ¾" x ½" 20mm x 13mm
THBM-25 1" x ½" 25mm x 13mm
THBM-30 1 ¼" x ½" 30mm x 13mm
THS-6025 2 ¼" x 1" 60mm x 25mm
THS-6012* 2 ¼" x 4 ¾" 60mm x 120mm
THS-7575 3" x 3" 75mm x 75mm
THS-1040 4" x 1 ½" 100mm x 40mm
Round
THBM-40 1 ½" x ½" 40mm x 13mm
TPBM-50 2" x ¾" 50mm x 16mm
THBM-50 2" x ¾" 50mm x 18mm
THBM-60 2 ¼" x ¾" 60mm x 18mm
THC-30* ø1 ¼" x 1" ø30mm x 27.5mm
THC-40* ø1 ½" x 1 ½" ø40mm x 37mm
THC-50* ø2" x 1 ¾" ø50mm x 45mm
THC-75* ø3" x 2 ¾" ø75mm x 72mm
End Caps
Screw-On End Cap Material: Aluminum Finish: Powder coat, anodized, or wood grain
Snap-On End Cap Material: Aluminum Finish: Powder coat, anodized, or wood grain
*Can utilize a finished THBM-60 backrail. Imperial measurements are rounded to the nearest ¼".
45
44
Special Order | Stringer Accessories
Interior and Exterior Wall, and Ceiling Direct Attachment Applications Special Order | Direct Attach Battens
Interior, Exterior Wall, and Ceiling Applications with Stringers
Stringer Attachment Clips
Attachment 20
Utilizes backrail CLKU-20
TLKS-2040 ¾" x 1 ½" 20mm x 40mm
TLKS-2060 ¾" x 2 ¼" 20mm x 60mm
TLKS-2080 ¾" x 3 ¼" 20mm x 80mm
BTP-09 ½" x 2" 15mm x 50mm
BTP-17 ¾" x 2" 22mm x 50mm
BTP-130 1 ½" x 2" 40mm x 50mm
TLKS-2010 ¾" x 4" 20mm x 100mm
TLKS-2015 ¾" x 6" 20mm x 150mm
Attachment 30
BTP-GP24 1 ½" x 4" 40mm x 100mm
BTP-30HD 1 ¼" x 1 ¾" 28mm x 45.7mm
BTP-M620
Utilizes backrail CLKU-30
TLKS-3030 1 ¼" x 1 ¼" 30mm x 30mm
TLKS-3050 1 ¼" x 2" 30mm x 50mm
TLKS-3060 1 ¼" x 2 ¼" 30mm x 60mm
TLKS-3075 1 ¼" x 3" 30mm x 75mm
Stringers
a
P 7.0 mm
4.0 mm
a
P
a
P
7.0 mm
7.0 mm
4.0 mm
4.0 mm
TLKS-3010 1 ¼" x 4" 30mm x 100mm
TLKS-3015 1 ¼" x 6" 30mm x 150mm
7.0 mm
70.0 mm
50.0 mm
L
L
70.0 mm
L
STAL-5
STAL-6
STAL-7
a
P 7.0 mm
4.0 mm
Attachment 40
Utilizes backrail CLKU-40
7.0 mm
L
50.0 mm
STAL-8
STCL-1
TLKS-4040 1 ½" x 1 ½" 40mm x 40mm
TLKS-4075 1 ½" x 3" 40mm x 75mm
Floor-to-Ceiling L-Brackets
Stringer Fittings
TLKS-4010 1 ½" x 4" 40mm x 100mm
TLKS-4015 1 ½" x 6" 40mm x 150mm
TBF L-Bracket Lite Finish: Black Powder Coat Compatible with: THS-2010, 2015, 2040,
TBF HD L-Bracket Finish: Black Powder Coat Compatible with: THS-3010, 3015, 5010, 5015, 50125, 6012
BTS-505 Welded Gusset Material: Steel Finish: Black powder coat Used with: STAL-7/STAL-8
BTS-4080ST Material: Steel Finish: Polished chrome Used with: STCL-1
2060, 2080, 2570, 2580, 3050, 3060, 3075, 3080, 4040, 4050, 4080, 5060
THSN-5050
Imperial measurements are rounded to the nearest ¼".
47
46
Interior Wall and Ceiling Direct Attachment Applications Special Order | Direct Attach Battens
Attachment 50
Attachment 100
Utilizes backrail CLKU-50
Utilizes backrail CLKU-100
TLKS-5050 2" x 2" 50mm x 50mm
TLKS-5060 2" x 2 ¼" 50mm x 60mm
TLKS-5010 2" x 4" 50mm x 100mm
TLKS-1030 4" x 1 ¼" 100mm x 30mm
TLKS-5015 2" x 6" 50mm x 150mm
End Caps
Bracketed Used on: THS 3010, 5010, and 5015 Battens Material: Steel Finish: Powder Coat to Match Batten Finish
Screw-On Used on: TLKS (Direct-Attach) Battens Material: Aluminum Finish: Powder Coat match or Wood Grain
Fortune 500 Tech Company
49
48
Interior and Exterior Wall Applications Special Order | Slat Profiles
Interior and Exterior Wall Applications Special Order | Slat Accessories
Standard Style with 10mm Reveal
Trims and Edge Treatment
Exterior Corner Trim
Interior Corner Trim
TRA-60ST + TRA-60AL 2" x ½" 50mm x 13mm
TRA-100 + TRA-100AL 4" x ½" 100mm x 13mm
M-16 t=1.2
M-19-1 t=1.2
M-70 t=1.2
M-78 t=1.2
TRA-120ST + TRA-120AL 4 ¾" x ½" 120mm x 13mm
TRA-150ST + TRA-150AL 6" x ½" 150mm x 13mm
H-Joints
TRA-200ST + TRA-200AL 8" x ½" 200mm x 13mm
M-64 t=1.2
M-71 t=1.3
Flat Style with No Reveal
Corner Trim
TRA-100MF 4" x ½" 100mm x 13mm
TRA-120MF 4 ¾" x ½" 120mm x 13mm
M-6 t=1.5
M-67 t=1.2
M-68 t=1.2
M-69 t=1.5
TRA-150MF 6" x ½" 150mm x 13mm
Example Slat Styles
Standard Style with Aluminum Reveal
Flat Style with No Reveal
Standard Style with Wood Grain Reveal
Imperial measurements are rounded to the nearest ¼".
51
50
System Enhancements | LightStrip
Fortina’s wood-inspired battens can be integrated with energy-efficient LED lighting, creating a seamless combination of material and illumination. LightStrip enhances depth, rhythm, and atmosphere while providing practical ambient light.
Lighting Applications
Direct Lighting LightStrip is integrated within the Fortina Batten and paired with LED diffuser back rails that clip seamlessly into place. The light source faces outward, creating defined lines of illumination for a clean, modern effect. Indirect Lighting Integrated within the Fortina Batten but concealed from direct view, indirect lighting casts a soft halo around each profile. This approach reduces glare and enhances depth within the space. Light Grazing Light grazing positions linear light at an angle along a vertical surface. When used with Fortina, the technique accentuates the texture and spacing of battens through contrast and shadow.
Indirect Lighting Wall
Direct Lighting
Indirect Lighting Ceiling
Scan to learn more about Fortina LightStip.
EIT Benefit Funds / Alsip, IL
53
52
Terms and Conditions
QUOTE BY PHONE 1-800-350-4127 (Outside Northern California) 1-650-593-4127 (Northern California) QUOTE/ORDERING BY E-MAIL MAIL@BNIND.COM (Ready 24 hours a day) CUSTOMER SERVICE Customer service is available 8:00 am to 5:00 pm (PST) Mon. – Thurs. and 8:00 am to 12:00 pm on Fri. to answer your inquiries regarding products, quotes or orders. WARRANTY We fully support the quality of our product. If there are any manufacturing defects within a year of delivery, please contact our Customer Service Department by phone or e-mail for assistance. PRODUCT WARRANTY LIMITATIONS The Customer is purchasing the fixtures in an "as-is" condition, unless otherwise reported to the Company pursuant to [the inspection provision in the contract], as of the date of delivery and specifically and expressly without any warranties, representations or guarantees, either expressed or implied, except as set forth below, as to its condition, fitness for any particular purpose, merchantability, or any other warranty of any kind, nature or type whatsoever from or on behalf of the seller. The Company hereby warrants to the Customer and its successors and assigns that the product supplied to the Customer is constructed only for the use and purposes contemplated by the Customer set forth in the contract; and the Company, immediately prior to the delivery of the product had good and lawful right to sell the product, and that there is hereby conveyed to the Customer on the date of delivery, good title to the product, free and clear of all liens, claims, encumbrances and rights of others. WEBSITE / PRINTED MATERIALS The copy has been reviewed to present information as accurately as possible. If an error is found in description or pricing, or the item has been discontinued, yet not updated, B+N reserves the right to correct it at the time it was discovered. PRODUCT OFFERINGS AND MATERIAL FINISHES ARE SUBJECT TO CHANGE AT ANY TIME. ORDER SHIPMENTS ESTIMATES Orders in stock will ship via ground in 2 – 5 days, unless another service level is requested by the customer.
BACK ORDERS Unless otherwise noted, back orders will ship when they are back in stock at our facility. Your Sales Administrator will keep you advised on the status of all back orders. BLANKET ORDERS Blanket orders are subject to a unique set of Terms & Conditions defined at the time of order placement. MINIMUM ORDER REQUIREMENTS $500 threshold must be reached to place an order. STORAGE Storage fees will be assessed after 30 days for all materials that were scheduled to ship but were delayed for customer related reasons at no fault to B&N Industries. Fees will be assessed weekly at $500 or 5% of the total order, whichever is greater. If an order is paid in full, then the storage fees must be cleared prior to shipment. If an order is partially paid for, then the remaining balance on the order plus storage fees must be paid prior to shipment. CANCELLATION AND RETURN ITEMS 1. Stock items must be returned within 30 days, in re-sellable condition. Return of stock items may incur a 25% re-stocking fee. Freight charges on returns are the customer's responsibility. A return authorization is required for all returns. Items returned without the proper authorization will not be accepted. B+N assumes no liability for customer returns which arrive damaged due to shipment transportation. 2. Non-stock items purchased may not be returned. 3. Prepaid material that remains beyond the 30-day original delivery schedule prior to cancellation will also be subject to storage fees. FREIGHT AND MULTIPLE SHIPMENTS 1. The following will result in additional charges unless otherwise stated on your quotation: – Shipments to multiple destinations or split shipments to the same location. – Customer requesting custom packaging (includes breakout into multiple packages) and shipped to one location. 2. Collect or 3rd Party Billing shipments are the responsibility of the freight payer. 3. Freight quotations are subject to re-quote at any time prior to the order being placed or at time of shipment if shipment is delayed. 4. Customer is responsible to arrange and pay for International freight, as quotes are for transportation only. Freight quotes provided by B&N do not include the broker, customs duties, fees or taxes. That is the responsibility of the customer to obtain and pay directly to the source. Broker information must be provided prior to shipping. 5. Weights and measurements may change due to changes in suppliers and/ or packaging. 6. B&N is unable to guarantee delivery times or dates. Delivery times and dates are the responsibility of the shipping agent. 7. Regarding split shipments: On occasion, an order may ship from multiple locations based on availability.
PRODUCT DISCREPANCIES AND DAMAGES VIA SHIPMENT 1 . Customer must inspect items upon delivery for damage or discrepancy. Please refer to B+N's Delivery Shipper Checklist Info document for terms. The Delivery Checklist can be found here: https://B N I N D . C O M /resources/ technical-data 2. B+N accepts no liability for damage incurred during shipping. Any damage found at time of delivery must be noted by customer on delivery receipt and signed/ initialed by driver. Customer is to retain all packaging with damaged items for an on-site inspection by carrier. 3. For damage on 3rd party or collect shipments, the customer is responsible for filing the claim with the carrier for financial reimbursement. 4. If any product arrives in damaged condition, a freight claim must be filed with the delivering carrier. Retain packing material and note on the Bill of Lading "DAMAGED". Our Customer Service Department will assist you with any questions regarding filing a freight claim. 5. All claims regarding shortages and freight damages must be presented WITHIN 7 DAYS of receiving the shipment. PAYMENT METHODS AND TERMS ACH, Wire, and Company Checks • Banking information can be provided upon request for electronic payment options Credit Cards (subject to 2.5% processing fee) • We accept VISA, MASTERCARD, AMERICAN EXPRESS. 1. Payment is due in full prior to shipping of product for all PREPAID ACCOUNTS. We do not ship COD. For payments made by check or bank transfer, the order will be processed upon receipt and approval of check or receipt of funds. 2. Consideration for establishing terms requires a combined order amount of $1,000,000+. 3. Approved repeat customers may qualify for NET terms at B&N's discretion if sufficient volume is reached. A credit application must be completed with the necessary references. Please allow 2-3 weeks for processing. All custom orders outside of a standard project scope will continue to require a 50% deposit. SALES TAX Due to the Wayfair vs South Dakota ruling all orders are subject to sales tax in the state that the material is delivered to unless a valid resale certificate is provided. Due to uncertain Economic Nexus requirements sales tax can be added to any order after a quote has been provided. 1. Taxable orders paid for by the customer and will-called at our California facility are taxed at the current rate for San Mateo County.
PROTOTYPES, DRAWINGS, TOOLING, AND FIXTURES 1. Drawings provided by B+N are the exclusive property of B+N Industries, LLC. 2. Prototypes made from drawings that are not detailed and approved by B+N Industries, LLC., or have been supplied via verbal instruction from the customer, are subject to the interpretation of B+N Industries, LLC. 3. Tooling dies and fixtures made and used exclusively for a job or customer, remain the property of B+N Industries, LLC., unless otherwise established. PHOTOGRAPHY OF COMPLETED PROJECTS B+N Industries, LLC. reserves the right to photograph a completed project that has utilized our product offerings and retains the rights to use the photographs in advertising, on our website, public relations and all marketing materials. FORTINA SPECIFIC ORDERS WARRANTY WARRANTY We support the quality of the Fortina product for 10 years. For more information, please visit our Warranty section. CANCELLATION AND RETURN ITEMS Fortina is considered a custom made to order line, therefore, may not be returned. If an order is canceled which is in production the customer is liable for paying for all products ordered.
55
54
Learn More
www.bnind.com | 800.350.4127
Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52-53 Page 54-55 Page 56www.momentumtextilesandwalls.com
Made with FlippingBook flipbook maker