FOR SAFE WORKING LIVES HEIGHTSAFETY
6
CATALOGUE VOL1
HEIGHTSAFETY 6
KITS
10-13
HARNESSES
14-27
LANYARDS
28-37
INERTIA REELS
38-40
42-47
RESCUE
ANCHORS
48-51
HARDWARE
52-59
ACCESSORIES
60-65
OUR RANGE OF HEIGHT SAFETY, FALL PROTECTION AND RESCUE EQUIPMENT ENABLES SUPERIOR PERFORMANCE and unparalleled safety in elevated and confined space conditions, including work positioning, work restraint, vertical rescue, confined space entry, rope access, rescue, fall arrest, and emergency response.
HEIGHT SAFETY AT BUNZL SAFETY & LIFTING WE ONLY PROVIDE THE BEST AND MOST ADVANCED HEIGHT SAFETY AND FALL PROTECTION PRODUCTS ON THE MARKET. ALL PRODUCTS ARE TESTED AND LABELED ACCORDING TO AUSTRALIAN STANDARDS AND ARE SUPPLIED WITH THE NECESSARY INSTRUCTIONS FOR THEIR CORRECT USE. It is important that users of height safety equipment are competent when working at height and have appropriate training in the products used. All products are supplied with technical user manuals and these must be referred to prior to the equipment being used. These manuals cover all necessary safe use requirements and are regarded as the manufacturer's instructions for use.
RISK ASSESSMENT PROCEDURES
Risk assessments should be conducted prior to any work at height or confined space work being carried out to identify hazards that exist and the risks they pose. AS/NZS 1891.4:2009 contains a hierarchy of control which provides an ideal platform for development of risk assessments. below is a sample risk assessment procedure for working at height.
HAZARD
ASSESS
ACTION
Falling from a height
Elimination
No risk
Slipping or tripping on a roof surface
Limited risk
Substitution
Fall restraint technique
Isolation
Fall arrest
Safe work systems
Fall protection
Consequences of a fall
Recovery systems
Reference to local authorities is also recommended This table is only an example, with many other factors to be considered. Other hazards may include, but are not limited to: Nature of the work, surface materials, fragile roofing material, personal training levels, competency, weather conditions, surface conditions, etc. Reference should be made to AS/NZS 1891.4:2009 for the correct use, selection and maintenance criteria for height safety systems. It is recommended that wherever possible a “restraint technique” system is used. This is a system where a person using fall arrest rated equipment, is prevented from reaching a position from where a fall is possible. Relevant Australian/New Zealand standards listed below are recommended for further reading: AS/NZS 1891.1 Personal Equipment For Work At Height - Part 1 - Manufacturing Requirements For Full Body Combination And Lower Body Harnesses. This is a manufacturing standard which specifies requirements for materials, design, manufacturing and testing of harnesses. Testing utilises 100kg mass – users of greater mass should consult manufacturer. • AS/NZS 1891.2 Personal Equipment For Work At Height - Part 2 - Horizontal Lifeline And Rail Systems. • AS 1891.3 Personal Equipment For Work At Height - Part 3 - Manufacturing Requirements For Fall-Arrest Device. • AS/NZS 1891.4 Industrial Fall-Arrest Systems And Devices - Part 4 - Selection, Use And Maintenance. • AS 1891.5 Personal Equipment For Work At Height - Part 5 - Manufacturing Requirements For Lanyard Assemblies And Pole Straps.
6 4 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
These standards are to be used as a guide to form safe work procedures but they are not all inclusive.
GENERAL TERMINOLOGY USED IN FALL PREVENTION
GENERAL PRINCIPLES OF SAFELY WORKING AT HEIGHTS WORK SITES TODAY POSE HAZARDS THAT CAN CAUSE SERIOUS HARM. The obligation to end each day safely is everyone’s responsibility; employers and employees. An awareness of the hazards at workplaces allows them to be safely addressed. This principle has been used in many very high risk occupations for some time, and the benefits have been rewarding with a noticeable reduction in accident statistics. A risk assessment and hazard reduction program should be used by all working at height. Identification of the hazards is key to working safely – avoiding injury or death.
Control of a person's movement by means of a combination of harness and shock absorbing lanyard connected to an anchor point that will physically prevent the person from reaching a position at which there is a risk of a free fall. RESTRAINT TECHNIQUE
RESTRAINED FALL / RESTRAINED FALL-ARREST
A fall or the arrest of a fall where the person suffering the fall is partially restrained by a restraining device such as a pole strap under tension, or is sliding down a slope on which it is normally possible to walk without the assistance of a handrail or hand line.
A fall or the arrest of a fall where the free fall distance prior to the system taking the load does not exceed 600mm. LIMITED FREE FALL
beaver.com.au A fall or the arrest of a fall where the fall distance prior to the fall arrest system taking any load exceeds 600mm, either vertically or on a slope on which it is not possible to walk without assistance of a handrail or hand line. The maximum free fall distance permitted with a shock absorbing lanyard is 2m. (Refer notes on fall clearances). FREE FALL ARREST beaver.com.au
beaver.com.au
Free fall > 600mm <2000mm
6
beaver.com.au
bunzlsafety.com.au | 5
FALL ARREST CONSIDERATIONS IN ALL CASES, WHEN WORKING AT HEIGHT USING FALL ARREST EQUIPMENT IT IS ESSENTIAL THAT THERE BE ADEQUATE CLEARANCE UNDER THE AREA OF WORK, SO THAT IN THE EVENT OF A FALL THE USER WILL NOT STRIKE THE GROUND OR ANY OTHER HAZARDOUS OBJECTS. If it is assessed that the occurrence of a fall would endanger the user then other fall protection systems must be considered. This may include the use of shorter shock absorbing lanyards, retracting lanyards, relocating the anchor point or adjustable lanyards. In each case the fall clearance must be identified and the hazards associated with fall clearance eliminated. The benefits of reducing free fall distances are multiple. If the free fall distance is reduced, then the load on the system and the person are reduced. Also the recovery method may be simplified and time may be significantly reduced. Wherever possible, the attachment point for a fall arrest system should be located above the attachment point on the users harness. When this is not possible the shock absorbing lanyard length must be reduced to ensure that the maximum fall distance of the user is limited to 2m (Consult AS/NZS 1891.4 cl 8.1). A user should never climb above the attachment point using a fall arrest shock absorbing lanyard as this only adds to the free fall distance which may take it over the permitted 2m.
SHOCK ABSORBING LANYARDS / INERTIA REELS – FALL CLEARANCES
FALL CLEARANCES FOR SHOCK ABSORBING LANYARDS FC = Foot Clearance FC = FF + AB + 1000 FF = Free Fall
(Maximum Allowed 2000mm Before Activation) Add 250mm For Harness Slippage. Shock Absorber Extension AS/NZS 1891.4 Advises that this can be Estimated using FF Which Reduces FC accordingly.
AB
=
FF
AB
600mm 1000mm 1500mm 2000mm
300mm 500mm 600mm 900mm
1000mm Standard Safety Clearance Figure.
FALL CLEARANCES FOR INERTIA REELS FC = FT + 1000 FC = Foot Clearance FT = Fall Total (Free Fall, Activation and Declaration to be 1.4M max) Add 250mm Harness slippage. AS/NZS 1891.4:2009 advises that this can be estimated at 700mm + stretch and slide.
1000mm standard safety clearance figure.
6 6 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
TRAINING SERVICES TOGETHER WITH OUR SUPPLY PARTNERS, WE OFFER NATIONALLY RECOGNISED COMPETENCY-BASED TRAINING COURSES IN HEIGHT SAFETY AND FALL PREVENTION. Courses such as the basic use and maintenance of height safety systems, fall arrest training, confined space and rescue techniques, and the use of breathing apparatus, can be provided at some of our branches or at your site, providing you meet minimum attendance numbers required.
Bunzl Safety & Lifting can also offer hands-on product training and tool-box style talks through our B-Safe mobile demonstration trailer on a periodic basis by request. These demonstration trailers are fitted with drop test and force measuring instruments to demonstrate arresting forces that workers would experience during a fall. This training consists of comprehensive user product demonstrations to educate users on height safety and fall prevention processes and equipment. Product demonstrations include fitting a harness, selection of equipment, user inspections and a rescue demonstration based on the 5 basic competency elements of height safety:
• Body Harnesses • Shock Absorbing Lanyards • Anchors • Fall Rescue • Education
Some of the popular accredited courses offered include:
» Height Safety Operator » Working Safely at Heights (WSAH) - Including Rescue » Height Safety Refresher » Enter Confined Space » Confined Space Non-Entry (Rescue Techniques)
For further information and advice on any of the above training options, please contact your local Bunzl Safety & Lifting representative.
6
bunzlsafety.com.au | 7
HARNESS FITTING INSTRUCTIONS BEFORE USING THE B-SAFE HARNESS, USERS SHOULD DO A PRE-INSPECTION OF THE HARNESS
Including webbing, metal fittings, connection points and labels should be checked for damage. Refer to your B-Safe instruction booklet and, if in any doubt, contact your supervisor, supplier or B-Safe for advice. The date of entry into service should be recorded in the instruction booklet provided.
STEP 1
STEP 2
Hold the harness by the rear dorsal connection D-ring and gently shake the harness to untangle the straps. Ensure the leg straps are free and not buckled up. Ensure all straps are fully extended. Whilst holding the harness by the dorsal D-ring, carry out a pre-use inspection of the components, webbing, stitching and buckles. Check labeling to identify the withdrawal-from-service date has not passed.
Hold the harness with the dorsal D-ring facing away from you, place the shoulder straps of the harness over your hands (as shown) and hold the harness open.
STEP 3
STEP 4
Rotate harness and insert elbow into arm loop and then place arm through the loop, release shoulder strap and place other arm through the other shoulder loop and let harness fall onto the shoulders. Ensure the harness is fitted correctly without any webbing twists over the shoulders.
Buckle all straps prior to adjusting the fit. Locate chest strap and pass the smaller buckle plate through the other chest strap buckle (as shown in the "How to assemble buckles" diagrams). Hold buckle and pull webbing to tighten straps to a firm and comfortable fit and slide keepers along the leg strap webbing to hold free webbing.
STEP 5
STEP 6
Locate the leg straps and ensure the left leg strap is connected to the left hip buckle and the right leg strap is connected to the right hip buckle. Ensure the straps are not twisted and the loose webbing end is always on the outside, away from the body. Hold buckle and pull webbing to tighten straps to a firm and comfortable fit and slide keepers along the leg strap webbing to hold free webbing.
Adjust shoulder straps first to ensure that the rear dorsal D-ring is located between the shoulder blades in the centre of the back. Then adjust chest and leg straps to a firm fit, and slide webbing keepers along to hold free webbing in place. When using the front attachment points, both loops must be connected as per AS/NZS 1891.1.
6 8 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 Content courtesy of
6
bunzlsafety.com.au | 9
HARNESS KITS
PROFESSIONAL ROOFERS KIT FEATURES AND BENEFITS
• Compact kit in sturdy backpack for easy transportation and storage • Full body all-purpose roofers harness with front & rear attachment points • Designed to suit most roofing applications • Adjustable shock absorbing lanyard is rated to 50kg - 140kg to protect lower & upper user mass • Includes suspension trauma straps KIT COMPONENTS • BH01120 - Fall Arrest Harness • BS010115A - 15m Kernmantle Rope Safety Line - with Snap Hook & Manual Rope Adjuster • BP03102 - 2m Webbed Attachment Strap - rated for 1 Person • BL01112PRO-ADJ - 2m Heavy Duty Adjustable Shock Absorbing Lanyard with Snap Hooks • BSK0003-16 - Alloy Steel Twist Lock Karabiner • BA00024 - Suspension Trauma Straps • B-Safe Backpack STANDARDS AS 1891.5:2020 certified product (Lanyard). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). Batch tested & visually inspected. All raw materials conform to relevant standards.
TRADIE ROOFERS KIT FEATURES AND BENEFITS • Compact kit in sturdy backpack for easy transportation and storage • Full body all-purpose roofers harness with front & rear attachment points • Designed to suit most roofing applications KIT COMPONENTS • BH01120TRAD - Fall Arrest Harness • BS010115TRAD - Rope Safety Line - 15m Kernmantle Rope with eye on one end and fitted with manual rope adjuster with built in energy absorber • BP03101.5 - 1.5m Webbed Attachment Strap - rated for 1 Person • BSK0003-16 - 2 x Alloy Steel Twist Lock Karabiners • B-Safe Tradie Backpack STANDARDS AS 1891.5:2020 certified product (Lanyard). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). Batch tested & visually inspected. All raw materials conform to relevant standards.
CODE
CAPACITY STOCK
CODE
CAPACITY STOCK
BK061215TRAD
BK061015PRO
140kg
140kg
S
S
6 10 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
HARNESS KITS
CONSTRUCTION KIT FEATURES AND BENEFITS • Compact kit in sturdy bag for easy transportation, storage & use on construction sites • Ease of use, ensuring that workers comply with construction site requirements • Full body fall arrest harness with front and rear attachment points • Manulink for quick and easy connection to anchor point KIT COMPONENTS • BH01120 - Fall Arrest Harness • BL01112HD - 2m Shock Absorbing Lanyard • BFK08 - 140mm Manulink • BA0351 - Sturdy B-Safe Bag • BA00040 - Stowage Point B-Safe STANDARDS AS 1891.5:2020 certified product (Lanyard). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). Batch tested & visually inspected. All raw materials conform to relevant standards.
WELDERS KIT FEATURES AND BENEFITS • Kit specifically designed for hot works environments • Easily assembled components • Simple system for occasional use • All in one kit, no further components required
• Suitable for welders KIT COMPONENTS • BA0351 - Bag • BH01120K-QB - Harness • BL01662kHD - Shock Absorbing Lanyard
• BSK0003-16 - Karabiner • BFK08 - 140mm Manulink STANDARDS AS 1891.5:2020 certified product (Lanyard). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). Batch tested & visually inspected. All raw materials conform to relevant standards.
CODE
CAPACITY STOCK
CODE
CAPACITY STOCK
BK072000
BK080009
140kg
140kg
M
M
ELECTRICAL WORKERS KIT FEATURES AND BENEFITS • Compact kit in sturdy bag for easy transportation & storage • Kit designed for tower, pole & electrical work • Full body tower workers harness with back support for positioning & QB quick release buckles • Contains 2.5m pole strap KIT COMPONENTS • BH05200-QB - Tower Workers Harness • BL05332.5 - Retracting Lanyard • BP02112.5 - Pole Strap • BP03102 - Attachment Strap • BA0580 - B-Safe Large Gear Bag STANDARDS AS 1891.5:2020 certified product (Pole strap). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). AS1891.3:2020 (SRL). Batch tested & visually inspected. All raw materials conform to relevant standards.
ELEVATED WORK PLATFORM KIT FEATURES AND BENEFITS • Designed for all operators/users of Elevated Work Platforms (EWPs) such as scissor lifts, boom lifts & forklift safety cages • All purpose full body harness • Self retracting lanyard with built in shock absorber KIT COMPONENTS • BMIC02-130AT - Retractable Lanyard Arresto • BH01120 - Harness • BSK0002TC-16 - Karabiner Steel Triple Action • BA0351 - B-Safe Bag STANDARDS AS 1891.3:2020 certified product (SRL). AS/NZS 1891.1:2020 (Harness). ANSI Z359.12-2009 (Karabiner). Batch tested & visually inspection. All raw materials conform to relevant standards.
6
CODE
CAPACITY STOCK
CODE
CAPACITY STOCK
BK073000
BK080010
100kg
100kg
M
M
bunzlsafety.com.au | 11
HARNESS KITS
ROOFERS COMPLIANCE KIT FEATURES AND BENEFITS • Complete fall protection kit • Contains Pro Climbing Harness suited to rigging, rescue, construction, elevated work platforms & access work
MINERS KIT FEATURES AND BENEFITS • Miners specialty kit • Reflective harness suitable for miners • Adjustable lanyards suited for short & long applications • Included triple action karabiners for anchoring & attachment hardware KIT COMPONENTS • BH02030R-QB - Harness with reflective tape • BL02402A - Adjustable Rope Lanyard • BSK002TC-16 - 2 x Karabiner • BP03001.5 - Tie Off Adaptor • BL07662HD - Shock Absorbing Lanyard • BA0351 - Sturdy B-Safe Bag STANDARDS All components 100% visually inspected. Harness complies to AS/NZS1891.1. All raw materials conform to safety standards. D-Rings and buckles are batch tested to destruction.
• Medium Pro™ Climbing Harness • Heavy duty backpack storage bag KIT COMPONENTS • CS 2 G-AUS-0902 - Safety Harness • AUS-0750-15 - Safety Line 15m • LOOP 26 kN L-0008-1 - Anchor Strap • L-AUS-0005 - Shock Pack
• HARNESS BACKPACK PROTON • OVALSTEEL SC H-037 Karabiner STANDARDS All components 100% visually inspected. Harness complies to AS/NZS1891.1. All raw materials conform to safety standards. D-Rings and buckles are batch tested to destruction.
CODE
CAPACITY STOCK
CODE
CAPACITY STOCK
BK08012
SKSET-AUS0006
50kg - 140kg
1 Person
M
S
CONSTRUCTION WORKERS KIT FEATURES AND BENEFITS • Complete construction workers fall protection system • Convenient solution to ensure compliance • Ideal for the first time or occasional user of height safety equipment • Handy durable kit storage KIT COMPONENTS • 380M-0018 - Delta All Purpose Harness • 3101000 - Talon 2.4m Retractable Lanyard • Z90203636 - 2m Shock Absorbing Lanyard • E849-015 - 1.5m Tie Off Adaptor • Equipment Bag STANDARDS All components 100% visually inspected. Harness complies to AS/NZS1891.1. All raw materials conform to safety standards. D-Rings and buckles are batch tested to destruction.
CONSTRUCTION WORKERS KIT FEATURES AND BENEFITS • Complete construction workers fall protection system • Contains Pro Climbing Harness suited to rigging, rescue, construction, elevated work platforms & access work • Medium Pro™ Climbing Harness • Heavy duty backpack storage bag KIT COMPONENTS • AB11343 - Medium Pro™ Climbing Harness • 3100447 - 3.3m Rebel™ Personal Self Retracting Lifeline • AM450/150AU - 1.5m Round Anchor Strap • AKO66AU-BKP - Heavy duty backpack storage STANDARDS All components 100% visually inspected. Harness complies to AS/NZS1891.1. All raw materials conform to safety standards. D-Rings and buckles are batch tested to destruction.
6 12 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 CODE CAPACITY STOCK 3M19000004 136kg S CODE
CAPACITY STOCK
3MAA410AU
136kg
S
FALL ARREST HARNESSES
ALL PURPOSE HARNESS WITH CENTRE CHEST STRAP FEATURES AND BENEFITS • Lightweight & comfortable • Rear D-ring & front attachment loops above • Shoulder adjuster • Fully adjustable • Centre chest strap design STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
ALL PURPOSE HARNESS FEATURES AND BENEFITS • Lightweight & comfortable • Rear D-ring & front attachment loops above • Shoulder adjuster • Fully adjustable STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BH01120
BH01115
M
M
M
S
Other sizes available to order.
Other sizes available to order.
ALL PURPOSE HARNESS WITH FRONT D-RING RESCUE FEATURES AND BENEFITS • Lightweight & comfortable • Rear D-ring & front attachment loops above • Shoulder adjuster • Fully adjustable • Front D-ring rescue STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
ALL PURPOSE HARNESS WITH WAIST STRAP FEATURES AND BENEFITS • Lightweight & comfortable
• Rear D-ring & front attachment points • Fully adjustable leg & shoulder straps • Side D-rings for pole strap STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
6 14 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 BH01116 M M BH01121 Other sizes available to order.
M
S
Other sizes available to order.
FALL ARREST HARNESSES
ALL PURPOSE HARNESS WITH EXTENSION D-RING FEATURES AND BENEFITS • Lightweight & comfortable • Rear D-ring & front attachment loops above shoulder adjuster • Fully adjustable • Front D-ring rescue • Rear extension D-ring STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
ALL PURPOSE HARNESS WITH WIRE ROPE LANYARD FEATURES AND BENEFITS • Lightweight & comfortable • Comes with 2m PVC coated wire shock absorbing • Lanyard permanently attached to rear D-ring • Fully adjustable leg & shoulder straps • Front fall arrest loops STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BH01124
BH01132
Unisize
M
S
S
Other sizes available to order.
ALL PURPOSE HARNESS WITH WEB LANYARD & WAIST STRAP FEATURES AND BENEFITS • Lightweight & comfortable • 2m web shock absorbing lanyard permanently attached to the rear D-ring • Fully adjustable leg, shoulder, chest & waist straps • Side D-rings for pole strap • Front fall arrest loops STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
ALL PURPOSE HARNESS WITH WEB LANYARD FEATURES AND BENEFITS • Lightweight & comfortable • Front attachment loops • 2m web shock absorbing lanyard permanently attached to the rear D-ring • Fully adjustable leg, shoulder & chest straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
6
BH01112
M
BH01151
M
S
S
Other sizes available to order.
Other sizes available to order.
bunzlsafety.com.au | 15
FALL ARREST HARNESSES
ALL PURPOSE CROSSOVER HARNESS FEATURES AND BENEFITS • Lightweight & comfortable • Front attachment loops • Unique cross over design for superior comfort • Fully adjustable leg, shoulder & chest straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
BH01118
M
S
Other sizes available to order.
CS 2 ALL PURPOSE FALL ARREST HARNESS FEATURES AND BENEFITS • Features male & female connectors • Leg adjuster straps • Rear steel D-ring
IGNITE ION FALL ARREST HARNESS FEATURES AND BENEFITS • Easy to don & adjust
• Alloy rear dorsal attachment point • Large webbing fall arrest loop (chest) • Adjustment confined space loops
• 2 x fall arrest web loops at the chest • Elasticised click connect chest strap
STANDARDS AS/NZS 1891.1
STANDARDS AS/NZS 1891.1
6 16 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 CODE SIZE STOCK SSKYL-GAUS0902CX Unisize S CODE
SIZE
STOCK
G-AUS-1135-M/XXL
M - XXL
S
Other sizes available to order.
FALL ARREST HARNESSES
P50 FIRST FALL ARREST HARNESS FEATURES AND BENEFITS • Rear fall arrest rated D-ring • Pass-thru buckles on chest & leg straps
• Polyester web construction • Easy adjust torso buckle • Front fall arrest / belay loops • Bonus harness storage bag
STANDARDS AS/NZS 1891.1 CODE 3M-1390061A
SIZE
STOCK
M
S
Other sizes available to order.
EXO FIT NEX ™ FALL ARREST HARNESS FEATURES AND BENEFITS • Non-slip hybrid comfort padding • Large rear Tech-Lite™ aluminium D-ring • Repel™ technology webbing • Built-in lanyard keepers • Revolver™ vertical torso adjusters • Impact indicator
STANDARDS AS/NZS 1891.1
CODE
SIZE
STOCK
6
D9311200
M
S
Other sizes available to order.
bunzlsafety.com.au | 17
CONFINED SPACE HARNESSES
QUICK RELEASE BUCKLE RANGE
QUICK RELEASE BUCKLE RANGE
SWIFT QB CONFINED SPACE HARNESS FEATURES AND BENEFITS • Extension strap - Compact design with fall indicator (when using dorsal extension maximum shock absorbing lanyard, length should be 1.6m) • Included suspension trauma straps • Zinc plated mild steel 2 bar 3 bar buckles to shoulders • Efficient high capacity (25kN) quick connect buckles to chest & legs • Colour fast webbing • Labelling fully protected by clear PVC STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
EVOLVE CONFINED SPACE HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • Heavy duty aluminium hardware • Fully adjustable posilock front D-ring • Fully adjustable leg & shoulder straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards. CODE SIZE STOCK BH02020QB-EVOLVE M S Other sizes available to order.
CODE
SIZE
STOCK
BH02020-QB
M
S
Other sizes available to order.
DIELECTRIC RANGE
EVOLVE CONFINED SPACE DIELECTRIC HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • 9kV dielectric resistant hardware • Fully adjustable posilock front D-ring • Adjustable leg & shoulder straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested All raw materials conform to relevant safety standards.
6 18 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 CODE SIZE STOCK BH02020DE-EVOLVE M M
CONFINED SPACE HARNESSES
DELTA CONFINED SPACE HARNESS FEATURES AND BENEFITS • No-tangle design • Front fall arrest rated D-ring • Quick connect buckles on chest, waist & leg straps • Large rear fall arrest rated stand-up D-ring • Impact indicator • Bonus harness storage bag
EXOFIT NEX ™ CONFINED SPACE HARNESS FEATURES AND BENEFITS • Non-slip hybrid comfort padding on shoulders, back, legs & hip • Large fall arrest rated front Tech-Lite™ aluminium D-ring • Waist belt with large side Tech-Lite™ aluminium D-rings • Wide padded lower back / hip pad • Duo-Lok™ quick connect buckles on chest, waist & leg straps • Repel™ technology webbing
STANDARDS AS/NZS 1891.1
STANDARDS AS/NZS 1891.1
CODE
SIZE
STOCK
CODE
SIZE
STOCK
6
823M0018
623M2018
M
M
S
S
Other sizes available to order.
Other sizes available to order.
bunzlsafety.com.au | 19
UTILITIES HARNESSES
QUICK RELEASE BUCKLE RANGE
DIELECTRIC RANGE
EVOLVE POLE WORK DIELECTRIC HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • 9kV dielectric resistant hardware • Fully adjustable posilock front D-ring • Adjustable leg & shoulder straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
EVOLVE POLE WORK HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • Heavy duty aluminium hardware • Fully adjustable posilock front D-ring • Comfort padded supporting waist belt with side D-rings • Fully adjustable leg & shoulder straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BH02030QB-EVOLVE
M
M
BH02030DE-EVOLVE
M
M
QUICK RELEASE BUCKLE RANGE
DIELECTRIC RANGE
EVOLVE UTILITIES HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • Heavy duty aluminium hardware • Comfort padded supporting waist belt with side D-rings
EVOLVE UTILITIES DIELECTRIC HARNESS FEATURES AND BENEFITS • Comfort padding on soft twill, water repellent webbing • 9kV dielectric resistant hardware • Fully adjustable posilock front D-ring • Comfort padded supporting waist belt with side D-rings • Functional drop down seat with D-rings STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
• Fully adjustable posilock front D-ring • Functional drop down seat with D-rings • Fully adjustable leg & shoulder straps STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards. CODE SIZE STOCK BH04055QB-EVOLVE M M Other sizes available to order.
6 20 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 CODE
SIZE
STOCK
BH04055DE-EVOLVE
M
M
UTILITIES HARNESSES
QUICK RELEASE BUCKLE RANGE
QUICK RELEASE BUCKLE RANGE
SWIFT QB POLE WORKERS HARNESS FEATURES AND BENEFITS • Manufactured from a lightweight, comfortable & durable webbing • Inclusion of suspension trauma straps • Anti-slide pin in quick connect buckle reduces webbing creep • Dorsal extension strap • Adjustable waist belt fitted with work positioning side D-rings • Sub-pelvic strap prevents harness peeling off STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
SWIFT QB UTILITIES HARNESS FEATURES AND BENEFITS • Dorsal extension strap
• Drop down seat with side D-rings • Comfort, support & work positioning • Efficient high capacity (25kN) quick connect buckles to chest & legs • Colour fast webbing • Labelling fully protected by clear PVC STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BH02030-QB
BH04055-QB
M S Other sizes available to order.
M M Other sizes available to order.
QUICK RELEASE BUCKLE RANGE
SWIFT QB TOWER WORKER HARNESS FEATURES AND BENEFITS • Padded back support & thigh straps • Tool loops • Fall arrest extension strap for ease of connection • Side D-rings • Front fall arrest D-rings • Confined space recovery loops • Fully adjustable thigh, shoulder, & waist straps • Fitting instructions available through QR code on harness STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards. CODE SIZE STOCK BH05200-QB M M
6
bunzlsafety.com.au | 21
UTILITIES HARNESSES
IGNITE PROTON WIND BODY HARNESS FEATURES AND BENEFITS • Chest eyelet for belay, but also for rescue • Alloy limited fall arrest attachment point on the centre front of the waist belt • Alloy dorsal & sternal attachment points • Adjustable confined space loops
ARG 30 2 POINT HARNESS FEATURES AND BENEFITS • Lightweight • Self adjusting confined space loops • Simple donning & removal
STANDARDS AS/NZS 1891.1 CODE SKG-AUS-0030
STANDARDS AS/NZS 1891.1
SIZE
STOCK
CODE
SIZE
STOCK
SKg-1132-WSMXXL
Unisize
M
S
S
Other sizes available to order.
6 22 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
UTILITIES HARNESSES
DROP DOWN WORK POSITIONING SEAT
EXOFIT NEX ™ TOWER WORKERS HARNESS WITH WORK POSITIONING SEAT FEATURES AND BENEFITS • Non-slip hybrid comfort padding on shoulders, back, legs & hip • Large rear fall arrest rated stand-up Tech-Lite™ aluminium D-ring • Large fall arrest rated front Tech-Lite™ aluminium D-ring • Waist belt with large side Tech-Lite™ aluminium D-rings • Wide padded lower back / hip pad • Work positioning seat with tanged pole D-rings • Duo-Lok™ quick connect buckles on chest, waist & leg straps
P50 FIRST CONSTRUCTION HARNESS FEATURES AND BENEFITS • Multiple attachment points • Front, rear, side D-rings for multiple • Shoulder retrieval attachment points • Added comfort • Waist belt & padded hip / lower back pad work positions
STANDARDS AS/NZS 1891.1
STANDARDS AS/NZS 1891.1
CODE
SIZE
STOCK
CODE
SIZE
STOCK
3M1390062A
3M653M4016
M
M
S
S
Other sizes available to order.
DBI-SALA ® EXOFIT NEX ™ WIND ENERGY HARNESS 603M4044 GREY MEDIUM 1 EA/ CASE
FEATURES AND BENEFITS • Tech-Lite™ aluminium D-rings • Lok™ quick connect buckles • Vertical torso adjusters • Suspension seat with tangled pole D-rings • Impact indicator • REPEL™ technology webbing
STANDARDS AS/NZS 1891.1 CODE 3M603M4044
6
SIZE
STOCK
M
S
bunzlsafety.com.au | 23
HOT WORKS HARNESSES
FULL FIRE RESISTANT HARNESSES
FULL FIRE RESISTANT HARNESSES
HOT WORKS CONFINED SPACE HARNESS FEATURES AND BENEFITS • Full body harness front & rear fall arrest attachments • Full fire resistant harness • Fall indicator, confined space recovery loops suspension trauma • Dorsal extension • Quick connect buckles STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
HOT WORKS ALL PURPOSE HARNESS FEATURES AND BENEFITS • Full fire resistant harness • Colour fast webbing • Fully adjustable leg, shoulder & chest straps • Rear breathable mesh panel • Clear & protected instructional labelling • Quick connect buckles STANDARDS AS/NZS 1891.1:2020 Certified Product. 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BH01120K-QB
BH02020K-QB
M
M
M
M
Other sizes available to order.
Other sizes available to order.
DELTA WELDERS HOT WORKS HARNESS FEATURES AND BENEFITS • No-tangle design • Nomex ® / Kevlar ® fibre webbing • Dielectric hardware • Protected labels, equipped with i-Safe™ • Bonus harness storage bag
STANDARDS AS/NZS 1891.1
CODE
SIZE
STOCK
6 24 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 Other sizes available to order. D9311218 M S
MINERS BELTS & HARNESSES
MINERS BELT WITH BACK PAD & SHOULDER STRAPS FEATURES AND BENEFITS • Front & rear zinc plated attachment points • Padded back support offering protection to the lumbar region • PVC impregnated extra long straps for battery & self rescuer • Lightweight & comfortable • Anti-slip quick release “clip style” buckling • Shoulder straps STANDARDS 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
MINERS BELT WITH ADJUSTABLE BACK PAD FEATURES AND BENEFITS • Front & rear zinc plated attachment points • Padded back support offering protection to the lumbar region • PVC impregnated extra long straps for battery & self rescuer • Lightweight & comfortable • Anti-slip quick release “clip style” buckling STANDARDS 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BM01000
BM02000
M
M
M
S
Other sizes available to order.
Other sizes available to order.
MINERS BELT WITH BATTERY STRAPS FEATURES AND BENEFITS • Front & rear zinc plated attachment points • Padded back support offering protection to the lumbar region • PVC impregnated extra long straps for battery & self rescuer • Lightweight & comfortable • Anti-slip quick release “clip style” buckling • Battery straps STANDARDS 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
CODE
SIZE S / M
STOCK
6
BM03000S-M
M
bunzlsafety.com.au | 25
MINERS BELTS & HARNESSES
MINERS BELT WITH SHOULDER STRAPS FEATURES AND BENEFITS • Adjustable waist belt with snap hook & D-ring closure buckle • Padded waist pad • Reflective tape on rear • Rear restraint / rescue D-ring • Adjustable battery pack & self rescue straps with velcro • Shoulder straps STANDARDS N/A
MINERS BELT FEATURES AND BENEFITS • Adjustable waist belt with snap hook & D-ring closure buckle • Padded waist pad • Reflective tape on rear • Rear restraint / rescue D-ring • Adjustable battery pack & self rescue straps with velcro STANDARDS N/A
CODE
SIZE
STOCK
CODE
SIZE
STOCK
3ME100M-0051
M
3ME10083700000M
M
S
S
Other sizes available to order.
Other sizes available to order.
6 26 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
HARNESS ACCESSORIES
SUSPENSION TRAUMA STRAP FEATURES AND BENEFITS • Slip Through loops • Snap clips • High strength hooks
LANYARD STOWAGE POINT FEATURES AND BENEFITS • Universal size • Polyester • Velcro attachment • Yellow contrasting for high visibility STANDARDS N/A
• Multi sizing loop keepers • Easy access zip pouch STANDARDS N/A
CODE
SIZE
STOCK
CODE
SIZE
STOCK
BA00024
BA00040
Universal
Universal
S
S
S
BA0700
BOSUNS CHAIR FEATURES AND BENEFITS • Integral cradle construction • Multiple tool loops • Waist tie attached to seat • Easy to use STANDARDS 100% visually inspected and batch tested. All raw materials conform to relevant safety standards.
BA0351
BA0580
BAGS CODE DESCRIPTION
CODE
SIZE
STOCK
SIZE
STOCK
BC01000-MK2
BA0351 Personal Equipment Gear Bag 500mm x 250mm x 250mm BA0580 Large Equipment Gear Bag 500mm x 300mm x 300mm
Unisize
S S
S
6
Can hold up to 50m of 11mm Rope
BA0700 Drawstring Bag
S
bunzlsafety.com.au | 27
LANYARDS
BL0111XXX
BL0112XXX
BL0133XXX
BL0144XXX
D9310261
SINGLE LEG WEBBING LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
BL01112HD BL01111.2HD BL01111HD BL01122HD BL01332HD BL01442HD
B-Safe B-Safe B-Safe B-Safe B-Safe B-Safe
2m Double Action Snap Hooks 1.2m Double Action Snap Hooks 1m Double Action Snap Hooks
Black Webbing Black Webbing Black Webbing Black Webbing Black Webbing Black Webbing
50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 160kg
S
M M
2m Double Action Snap Hook and Scaffold Hook
S
2m Double Action Karabiner 2m Triple Action Karabiner
M M
D9310261
3M
2m Snap Hooks
Webbing
S
6 28 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
LANYARDS
BL04322HD BL044221.5HD
BL0422XXX
BL044442HD
3MZ12200909
TWIN LEG WEBBING LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
BL04221.5HD BL04222HD BL04322HDA BL044221.5HD BL044442HD 3MZ12200909
B-Safe B-Safe B-Safe B-Safe B-Safe
1.5m Scaffold Hooks and Snap Hook 2m Scaffold Hooks and Snap Hook
Black Webbing Black Webbing Black Webbing Black Webbing Black Webbing
50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 160kg
M M M M M
2m Double Action Karabiner and Scaffold Hooks 1.5m Double Action Karabiner and Scaffold Hooks
2m Double Action Karabiners
3M
2m Snap Hooks
Webbing
S
BL0211XX
BL0212XXX
BL0233XXX
3MZ10200909R
SKL-AUS
SINGLE LEG ROPE LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
B-Safe B-Safe B-Safe
2m Snap Hooks
Kernmantle Rope Kernmantle Rope Kernmantle Rope Kernmantle Rope Kernmantle Rope Kernmantle Rope
50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 160kg 50kg - 130kg 50kg - 130kg
BL02112HD BL02122HD BL02332HD
M M M M M M
2m Snap Hook and Scaffold Hook 2m Double Action Karabiner 2m Double Action Snap Hooks
3MZ10200909R
3M
SKL-AUS-0089-1.5 SKL-AUS-0078-2
Skylotec Skylotec
1.5m Steel Snap Hooks
2m Triple Action Snap Hooks
6
bunzlsafety.com.au | 29
LANYARDS
BL02332HDA
BL021222HD
3MZ12202519R
SKL-AUS-0199-1.5
TWIN LEG ROPE LANYARDS STANDARDS AS 1891.5
CODE
BRANDS LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
B-Safe B-Safe
2m Aluminium Double Action Karabiners 2m Snap Hook and Scaffold Hooks 2m Double Action Snap Hook and Scaffold Hooks 1.5m Double Action Snap Hook and Scaffold Hooks
Kernmantle Rope Kernmantle Rope Kernmantle Rope Kernmantle Rope
50kg - 140kg 50kg - 140kg 50kg - 160kg 50kg - 140kg
BL023332HDA BL021222HD 3MZ12202519R
M M
3M
S S
SKL-AUS-0199-1.5
Skylotec
BL01122HD-ADJ
BL02302AHD-TC1
BL01112HD-ADJ
BL01442HD-ADJ
3MZ11206119R
D9310282
SKYL-AUS07001.8
SINGLE LEG ADJUSTABLE LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
B-Safe 850mm - 2m Double Action Snap Hook and Scaffold Hook
Webbing
50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 160kg 50kg - 160kg 50kg - 130kg
BL01122HD-ADJ BL02302AHD-TC1 BL01112HD-ADJ BL01442HD-ADJ
S
B-Safe 700mm - 2m Triple Action Karabiners B-Safe 850mm - 2m Double Action Snap Hooks B-Safe 850mm - 2m Triple Action Karabiners
Kernmantle Rope
M M M
Webbing Webbing Webbing Webbing Webbing
3MZ11206119R
3M 750mm - 2m Double Action Snap Hook and Scaffold Hook
S S S
6 30 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 3M 750mm - 2m Double Action Snap Hooks SKYL-AUS07001.8 Skylotec 1.2m - 1.8m Steel Snap Hooks D9310282
LANYARDS
BL021222AHDA-1
BL023332HDA-TCA1
3MZ13206129R
SKL-AUS-0711-1.8
SKL-AUS-0642
TWIN LEG ADJUSTABLE LANYARDS STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
BL021222AHDA-1
B-Safe 700mm - 2m Snap Hooks and Aluminium Scaffold Hooks
Kernmantle Rope Kernmantle Rope
50kg - 140kg 50kg - 140kg 50kg - 160kg 50kg - 140kg 50kg - 140kg
M M
BL023332HDA-TCA1 B-Safe 700mm - 2m Triple Action Karabiners
3MZ13206129R
3M 750mm - 2m Aluminium Triple Action Karabiner and Aluminium Scaffold Hooks Skylotec 1.2m - 1.8m Steel Snap Hook and Aluminium Scaffold Hooks
Webbing Webbing Webbing
S S S
SKL-AUS-0711-1.8
SKL-AUS-0642
Skylotec 1.2m - 1.8m Trilock Hook and Scaffold Hooks
BL0311XXX
BL03332HDA
WIRE ROPE LANYARDS STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
B-Safe B-Safe
2m Snap Hooks
Wire Rope Wire Rope
50kg - 140kg 50kg - 140kg
BL03112HD BL03332HDA
M M
2m Karabiner Twist Lock
6
bunzlsafety.com.au | 31
ELASTICISED LANYARDS
BL0711XXX
BL07122HD
BL0766XXX
BL07332HD-TC
SINGLE LEG ELASTICISED LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
B-Safe B-Safe B-Safe B-Safe B-Safe B-Safe
1m Snap Hooks 2m Snap Hooks
Elasticised Webbing Elasticised Webbing Elasticised Webbing Elasticised Webbing Elasticised Webbing Elasticised Webbing
50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg 50kg - 140kg
BL07111HD BL07112HDA BL07122HD BL07661.4HD BL07662HD BL07332HD-TC
M M M M M M
2m Snap Hook and Aluminium Scaffold Hook
1.4m Snap Hooks 2m Snap Hooks
2m Triple Action Karabiner
3MZ11206119R
SKL-AUS-0543-2
SKL-AUS0590-1.8
SKL-AUS-0588-1.8
SINGLE LEG ELASTICISED LANYARDS STANDARDS AS 1891.5 CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
D9310276
3M
2m Snap Hook and Scaffold Hook 2m Double Action Snap Hooks
Elasticated webbing Elasticated webbing Elasticated webbing Elasticated webbing
50kg - 160kg 50kg - 130kg 50kg - 140kg 50kg - 140kg
S S S S
SKL-AUS-0543-2 SKL-AUS0590-1.8
Skylotec Skylotec
2m Snap Hooks
6 32 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1 SKL-AUS-0588-1.8 Skylotec 1.8m Triple Action Karabiners
ELASTICISED LANYARDS
BL071112HD
BL07XXX
BL073222HD-TC
TWIN LEG ELASTICISED LANYARDS STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
B-Safe B-Safe B-Safe
2m Snap Hooks
Elasticised Webbing Elasticised Webbing Elasticised Webbing
50kg - 140kg 50kg - 140kg 50kg - 140kg
BL071112HD BL07222HD
M M M
2m Snap Hook and Scaffold Hooks
BL073222HD-TC
2m Triple Action Karabiner and Scaffold Hooks
Z60203634E
Z10202580E
SKL-AUS-0582-2
SKL-AUS-0595-1.8
SKL-AUS0590-1.8
TWIN LEG ELASTICISED LANYARDS
STANDARDS AS 1891.5
CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
Z60203634E Z10202580E
3M 3M
2m Snap Hook and Scaffold Hooks 2m Snap Hook and Scaffold Hooks
Elasticised Webbing Elasticised Webbing Elasticised Webbing Elasticised Webbing
50kg - 160kg 50kg - 160kg 50kg - 130kg 50kg - 140kg 50kg - 140kg
S S S S S
SKL-AUS-0582-2
Skylotec
2m Snap Hook and Aluminium Scaffold Hooks
6
SKL-AUS-0595-1.8 Skylotec
1.8m Snap Hook and Scaffold Hooks
SKL-AUS0590-1.8
Skylotec
1.8m Triple Action Karabiner and Aluminium Scaffold Hooks Elasticised Webbing
bunzlsafety.com.au | 33
HOT WORKS LANYARDS
BL01662kHD
D9310302
3MAE529Y/5W
HOT WORKS SPECIALTY LANYARDS STANDARDS AS 1891.5 CODE
BRAND LENGTH ATTACHMENT HARDWARE
MATERIAL
USER MASS LIMITS STOCK
BL01662kHD
B-Safe
2m Double Action Karabiners
45Mm Heracron / Meta Aramid 50kg - 140kg Nomex / Kevlar Fibre Webbing 50kg - 160kg
M
D9310302
3M 3M
2m Snap Hooks
S S
3MAE529Y/5W
2m Snap Hook and Scaffold Hooks
Kevlar Fibre Webbing
50kg - 160kg
6 34 | BUNZL SAFETY & LIFTING | SAFETY PRODUCTS CATALOGUE VOL1
ENERGY ABSORBER PACKS
BL01000HD
BL01000HD-TC
BL00160
BL00160-TC
SHOCK ABSORBER PACKS STANDARDS AS 1891.5
CODE
LENGTH ATTACHMENT HARDWARE
MATERIAL USER MASS LIMITS STOCK
BL01000HD
380mm N/A
Webbing Webbing Webbing Webbing
50kg - 140kg 50kg - 140kg 50kg - 100kg 50kg - 100kg
M M M M
BL01000HD-TC
280mm Triple Action Karabiners
BL00160
250mm V Ladder System Personal Shock Absorber ONLY
BL00160-TC
250mm V Ladder System Personal Shock Absorber ONLY Triple Action Karabiners
SKL-AUS-0005-AT
SKL-AUS-0005-KOB
SHOCK ABSORBER PACKS
STANDARDS AS 1891.5
CODE
LENGTH ATTACHMENT HARDWARE
CAPACITY
MATERIAL
USER MASS LIMITS STOCK
6
SKL-AUS-0005-AT
300mm Aluminium Double Action Karabiner
140kg 140kg
Webbing Webbing
50kg - 130kg 50kg - 130kg
S S
SKL-AUS-0005-KOB 300mm Steel Double Action Karabiner
bunzlsafety.com.au | 35
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68Made with FlippingBook Digital Publishing Software