3 JG ELECTRONICS – Copyright 2018
Auto Adjusting system
The auto-adjusting springs system provide consistent, even pressure across the mug surface, adapting automatically. This ensures flawless heat transfer, reduces the risk of uneven prints, and improves the overall quality of each finished mug. You do not have to adjust anything yourself.
MAKING A MUG
1. Take a clean mug, and stick the picture to be transferred onto it using the heat tape (highlighted in green to make it more easily visible) Your hands must be clean when you do this, as any oil on your fingers will stick to the mug, and not allow a good transfer to take place. 2. Be sure to stick the paper tightly onto the mug so that there are no air bubbles trapped under the paper. Also make sure that you put the image the right way on the mug! 3. Now take a sheet of standard copy paper, cut it in half down its length, and wrap it around the mug. Hold this paper tightly and place the mug into the press (while holding the mug wrapped in the paper). The reason for the paper is to stop moisture from transferring into the mug, and any ink from transferring back from your transfer paper into the mug element.
4. Now insert your mug into the press, and switch the press ON. At the same time, make sure your settings are set as in step 1 to 4 above and press the “execute button” to start timing. The machine will make a beeping sound when done.
Made with FlippingBook - professional solution for displaying marketing and sales documents online