Z334 Manual Bench Top Cup Height Earring Gauge
The Z334 is a bench-top system for cup height analysis.
Each cup to be inspected is manually loaded into the gauge and the measurement cycle is initiated via the PC running the TMS GaugeXplorer Measurement and Machine Control Software. Setup screens allow the operator to enter traceability information and select the number of samples and heads from which data is to be collected. Once the component has been measured, the operator may visually accept or reject the software’s calculated ‘Peaks’ and ‘Troughs’, which will be used in the Earring calculations.
Benefits to your business
Measurement Features:
Feature
Accuracy
Min. Cup Height
>
Compact, bench-top design
Average Cup Height
+\- 0.050 mm
> Measurements are performed using a single Digital Contact Transducer and Motorised Component Rotation through a full 360° > A range of component location rings and anti-ovality inserts may be supplied for various cup diameters
Range Cup Height
% Earring
Paired Earring
ELECTRICITY 100-240 Volts / 50-60 Hz
Repeatability Performance Data - available upon request
Technical Specification: Capabilities
COMPRESSED AIR N/A
Typical Range
WEIGHT 55kg
Cup Material
Aluminium/Steel
Cup Stages
Cups
DIMENSIONS (W) 341mm x (H) 535mm (D) 390mm
Cup Height Range
22 - 46 mm
x
x
Cup Body Diameter Range
76 - 115 mm
x
7.
Made with FlippingBook Online newsletter maker