Z341 Manual Aerosol Can Coating Analyser
The Torus Measurement Systems Manual Coating Analyser has been developed to give fast and accurate measurement of the internal lacquer, sprayed during today’s 2 and 3 piece can manufacturing process.
By cutting the can to give suitable access, the dome area of the can is able to be checked by the system.
No “lacquer panels” are required for calibration and measurement data can be exported via on board USB or LAN ports to your factory data acquisition systems where required.
Benefits to your business
Gauge Features:
> Simple, manual positioning by the operator ensures side wall measurements are immediately displayed on the embedded mini touch screen PC > Cans from (202) - (307) body diameter can be accomodated by the systems “scissor” action location fingers, operated at the push of a button > “Non-contact” means no wear parts, and the use of a non-contact “white light spectroscopy” technique guarantees unprecedented performance
Dual system equipped with two spectrometers -
Also available in Floor-standing Semi-automatic Automatic
» Visible light and Near Infrared (NIR) light, enables the OV/ over ink inspection
Measurement Features:
Feature
Accuracy
Capability
ELECTRICITY 100-240 Volts / 50-60 Hz
+\- 0.2 μm
0.4 μm
Internal Lacquer
+\- 0.2 μm
0.4 μm
Over Varnish
COMPRESSED AIR N/A
Technical Specification: Capabilities
WEIGHT Estimated 25kg
Typical Range
Body Diameter
Ø < 35mm
Click here to view the video
DIMENSIONS (W) 630.5mm x (H) 252mm (D) 300mm
x
x
x
109.
Made with FlippingBook Online newsletter maker