Z339 Manual (Back End) Finished Can Gauge
Each component is manually loaded by the operator and orientated to the required position for measurement. All features are simultaneously checked at each position, allowing a typical can inspection in under 30 seconds. The gauge is designed to ensure correlation with the Z302 series inspection systems by utilising common measurement principles and instrumentation.
Measurement Features:
Benefits to your business
Feature
Accuracy
Finished Can Height
+\- 0.010 mm
Flange Width
+\- 0.010 mm
> Automatic location tooling for Ø 200 and Ø 202 neck diameters > Can be used as a back-up system for automatic gauging if required > No change tooling for multiple diameters > Small bench top design making the gauge transportable and easy to move from the lab to the shop floor > Cost effective alternative to Torus’ Z302
Internal Neck Diameter
+\- 0.010 mm
Repeatability Performance Data - available upon request
Technical Specification: Capabilities
Typical Range
Can Materials
Aluminium
ELECTRICITY 100-240 Volts / 50-60 Hz
Can Stages
Finished
Can Height Range
88.4 - 188 mm
COMPRESSED AIR N/A
Can Flange Width
2 - 2.2 mm
Can Outside Body Diameter
Ø 202 - Ø 211 **
Can Internal Neck Diameter
Ø 200 - Ø 206 **
WEIGHT 52kg
** Beverage can standard diameter range includes but is not limited to.
Click here to view the video
DIMENSIONS (W) 561mm x (H) 650mm (D) 780mm
x
x
x
11.
Made with FlippingBook Online newsletter maker