Customise your Gauge
Our modular gauge setups are unique and allow you to customise your gauge as and when you require, giving you the flexibility to ensure you have a total quality solution.
Start with the standard Z301 Trimmed Can Inspection Front End Gauge
Add any of the below optional modules at any time.
Auto Pass/ Fail Sorting
Z705
Z301
Z312
Z309
Z307
Z308
Dome Growth/Dome Reversal Module
Multi-Lane Input Conveyor
Vision Module (For more information see Z312)
Provides detailed information about the overall change in length of can when pressure is applied and subsequently removed
Lane capability typically 24 x 211 body dia. can Single lane - 6 options available Automatic in-line configuration for each lane available
Quality percentage of UV Base RIM Coat (BRC) lacquer presence
Accuracy: +/- 0.10mm Accuracy: +/- 0.05 bar
Body Maker Recognition Module
Trimmed Can Weight Module
For in-line testing Detects bodymaker ID prior to measurement cycle to allow for bodymaker tracebility
Determines can weight Meets industry standard Resolution: 0.001g
Additional Options
Axial Load Module
In-Cycle Calibration module - for in-line inspection. Outer Body Dia. Inspection module - 1-8 rotational positions. Accuracy: +/- 0.025mm.
Determines the maximum axial load force that can be applied prior to container failure Accuracy: +/- 10N
32.
Made with FlippingBook Online newsletter maker