Z401 Automatic Shell Inspection Gauge
The Torus Z401 Shell Inspection Gauge defines the standard for dimensional inspection of beverage/beer can shells. Each shell to be inspected is automatically collected from a ‘stack’ and loaded into the gauging module with an integrated pick and place system. The measurement cycle is then initiated via the PC running the TMS GaugeXplorer Measurement and Machine Control software.
Benefits to your business
>
Fast and accurate measurement data
>
No change parts
> Can be supplied for a single-fixed diameter of shell, or for facilities producing multiple sizes from Ø 200 - Ø 206, a fully automatic adjustable version is available > Operator can define which features are inspected at up to 16 selectable positions > Pre-curl and finished shells can be measured with no mechanical changeover > Hopper type handling system, one or two load/unload hopper cassettes (stack of shells up to 98mm height)
Measurement Features:
Feature
Accuracy
Unit Depth
+\- 0.005 mm
Countersink
+\- 0.005 mm
Panel Depth
+\- 0.005 mm
Curl Diameter
+\- 0.005 mm
Curl Height
+\- 0.005 mm
Also available in Floor-standing Semi-automatic
Curl Opening*
+\- 0.025 mm
Inner Curl Diameter
+\- 0.025 mm
Average Metal Thickness
+\- 0.005 mm
ELECTRICITY 100-240 Volts / 50-60 Hz
Technical Specification: Capabilities
COMPRESSED AIR 5 bar / 73 PSI
Typical Range
Shell Materials
Aluminium
Shell Stages
Pre-Curl, Form, Finished
WEIGHT 430kg
Shell Body Diameter Range
Ø 200 - Ø 206
Click here to view the video
DIMENSIONS (W) 1270mm x (H) 1729mm (D) 1000mm
x
*Curl Opening feature not supported on CDL type shells. Repeatability Performance Data - available upon request
x
x
61.
Made with FlippingBook Online newsletter maker